PATCH: apply SoC concept on arm926 cpus
CHANGELOG entry:
* Patch by Andreas Engel, 20 June 2005
applied the SoC concept to arm926ejs cpus, i.e. moved the SoC specific timer and cpu_reset code from the ./cpu/$(CPU) directory into new ./cpu/$(CPU)/$(SOC) directories
-------------- next part --------------
A non-text attachment was scrubbed...
Name: diff2.gz
Type: application/octet-stream
Size: 4460 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20050620/e66a03a5/attachment.obj
I am going to port the u boot on motorola MX21ads which use arm926ejs as the core , do i need to install your patch before porting on mx21 ?
Regards,
TOM
Quoted 9 lines · Andreas Engel
CHANGELOG entry:
* Patch by Andreas Engel, 20 June 2005
applied the SoC concept to arm926ejs cpus, i.e. moved the SoC specific timer andcpu_resetcode from the ./cpu/$(CPU) directory into new ./cpu/$(CPU)/$(SOC) directories
Quoted 2 lines · In message <[email protected]> you wrote:
I am going to port the u boot on motorola MX21ads which use arm926ejs as the core , do i need to install your patch before porting on mx21 ?
It's probably a good idea; you benefit from it by saving the effort to adaprt your port later, and we benefit from an additional tester.
Best regards,
Wolfgang Denk
Signature · 4 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "It is better to have tried and failed than to have failed to try, but the result's the same." - Mike Dennison
Quoted 2 lines · On Mon, 20 Jun 2005 17:01:15 +0800 Tomko wrote:
I am going to port the u boot on motorola MX21ads which use arm926ejs as the core , do i need to install your patch before porting on mx21 ?
Hi TOM,
that depends. U-Boot already supports the MX1ads which has an arm920t core and this uses the SoC concept. So it might be a good idea to apply it to the MX21ads too.
Regards,
Andreas
Quoted 7 lines
I am going to port the u boot on motorola MX21ads which use arm926ejs as the core , do i need to install your patch before porting on mx21 ?
Regards,
TOM
Tom,
I too, just started working on an mx21ads port. Are you planning on booting from the NOR or NAND flash. I am primarily interested in NAND boot. Let me know what exactly you are working on, and maybe we can organize our effort.
Thanks,
Stephen Donecker
Dear Andreas,
Quoted 5 lines · in message <20050620094434.00006591@idefix> you wrote:
* Patch by Andreas Engel, 20 June 2005
applied the SoC concept to arm926ejs cpus, i.e. moved the SoC specific timer andcpu_resetcode from the ./cpu/$(CPU) directory into new ./cpu/$(CPU)/$(SOC) directories
Unfortunately this patch does not apply any more because of
previously added restructuring of the integrator code. Can you please re-create the patch against a more cussrent version of U-Boot?
Thanks in advance.
Best regards,
Wolfgang Denk
Signature · 5 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "Life and death are seldom logical." "But attaining a desired goal always is." -- McCoy and Spock, "The Galileo Seven", stardate 2821.7
Quoted 9 lines · Wolfgang Denk
Quoted 4 lines · in message <20050620094434.00006591@idefix> you wrote:
* Patch by Andreas Engel, 20 June 2005
applied the SoC concept to arm926ejs cpus, i.e. moved the SoC specific timer andcpu_resetcode from the ./cpu/$(CPU) directory into new ./cpu/$(CPU)/$(SOC) directoriesUnfortunately this patch does not apply any more because of
previously added restructuring of the integrator code. Can you please re-create the patch against a more cussrent version of U-Boot?
Ok, here's a new patch. Just take the changelog entry from above. Please note that I have appended an additional patch (not worth mentioning in the changelog) because compiling the omap boards otherwise failed for me.
Regards,
Andreas
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: soc-patch.txt
Url: http://lists.denx.de/pipermail/u-boot/attachments/20060313/de3b9edd/attachment.txt
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: sizes-patch.txt
Url: http://lists.denx.de/pipermail/u-boot/attachments/20060313/de3b9edd/attachment-0001.txt
Quoted 6 lines · In message <[email protected]> you wrote:
Quoted 6 lines
Quoted 5 lines
* Patch by Andreas Engel, 20 June 2005
applied the SoC concept to arm926ejs cpus, i.e. moved the SoC specific timer andcpu_resetcode from the ./cpu/$(CPU) directory into new ./cpu/$(CPU)/$(SOC) directories
Quoted 7 lines
Quoted 3 lines
Unfortunately this patch does not apply any more because of
previously added restructuring of the integrator code. Can you please re-create the patch against a more cussrent version of U-Boot?Ok, here's a new patch. Just take the changelog entry from above. Please note that I have appended an additional patch (not worth mentioning in the changelog) because compiling the omap boards otherwise failed for me.
Checked in, thanks a lot!
Best regards,
Wolfgang Denk
Signature · 5 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Hiring experienced unix people is like a built-in filter against
idiots. Hiring experienced NT people provides no such guarantee.
-- Miguel Cruz in WgL96.349$CC.122704 at typhoon2.ba-dsg.netQuoted 6 lines · Stephen Donecker <sdonecker <at> sbcglobal.net> writes:
Tom,
I too, just started working on an mx21ads port. Are you planning on booting from the NOR or NAND flash. I am primarily interested in NAND boot. Let me know what exactly you are working on, and maybe we can organize our effort.
I'm trying to make a port of openembedded BSP for the i.mx21 ADS . I started a wiki page at :
http://handhelds.org/moin/moin.cgi/SupportedHardwareTargets
I'm interessting for information about bootloader ( specially U-Boot ) and kernel support . Thanks to contribuate and release code or mail me .
Ronan