Skip to contentSkip to conversation

no output on serial console between probe and init

DISCUSSION Tim Strobell (Contractor) 1 participant 1 message Jun 27, 2005

lore
Share & tools
lore
#0 lore raw

Prior to 2.6.12, I was experiencing garbage on the serial console as others have mentioned in this thread:
http://www.uwsg.iu.edu/hypermail/linux/kernel/0503.3/0491.html
Applying Phil Oester's quick patch
http://www.uwsg.iu.edu/hypermail/linux/kernel/0503.3/1061.html
indeed removes the garbage but now produces no output until init is started.

The patch that was integrated into 2.6.12 also exhibits the same problem.

Output to the console:

....
PNP: PS/2 controller doesn't have AUX irq; using default 0xc
PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 112
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A

< nothing for about a minute; should at least see SCSI init here >

INIT: version 2.86 booting
Activating swap.Adding 2104504k swap on /dev/sda2. Priority:-1 extents:1 Checking root file system...
.....

This is on a relatively new Dell PowerEdge 1850; all serial output is at 9600 8N1.

Please CC any replies directly to me since I'm not on the list. Thanks!

-Tim

--
Tim Strobell, Sr. Systems Administrator V 202 767 8449
Center for Computational Science, Naval Research Lab F 202 404 7402
Code 5595 (A49-32), 4555 Overlook Ave SW, Washington DC 20375