HELP PLEASE BITTORRENT SHAPING (HTB)
Ok, earlier I post a message explaining my problem with HTB and layer7 (or ipp2p), about not being able to shape the traffic. Well, actually this is what's happening, I'm marking the packets (right now, I'm using ipp2p as Klaus adviced me to) with iptables, and my queue rules are made using tcng, I'm using the HTB qdisc, and traffic is going to the HTB class I order it to, but for some reason traffic is also going to the SMTP queue rule I have, I don't know why, and also I see traffic into the ACK queue, that seems to be normal I believe (but isn't it supposed to get marked as bittorrent traffic?), anyway, I have the doubt as of why is the traffic going to the smpt queue rule, if I remove this rule it'll go with the next rule (ssh), and I don't know why, it shouldn't do it, and I'm really worried, because I can't use my bandwidth, can't chat, browse the web, I can't do anything at all. Here are my new iptables rules, and tcng ones, please take a look at them, and tell me if you see any problem with them, and if someone had the same problem please let me know too. Also please if you think you can help, don't leave here with just one answer... because I don't know who else to ask, or where!, I'll really appreciate your help. Thank you
### IPTABLES RULES ###
#!/bin/sh
### ERASING RULES AND USER MADE CHAINS ###
iptables -t mangle -F
iptables -t mangle -X
iptables -t mangle -N lay7PRE
iptables -t mangle -N lay7POST
iptables -t mangle -N ipp2pPRE
iptables -t mangle -N ipp2pPOST
### PREROUTING RULES ###
iptables -t mangle -A PREROUTING -j CONNMARK --restore-mark iptables -t mangle -A PREROUTING -m mark ! --mark 0 -j ACCEPT iptables -t mangle -A ipp2pPRE -p tcp -m ipp2p --ipp2p -j MARK --set-mark 10 iptables -t mangle -A ipp2pPRE -p udp -m ipp2p --bit -j MARK --set-mark 10 iptables -t mangle -A ipp2pPRE -p tcp -m mark --mark 10 -j CONNMARK --save-mark
iptables -t mangle -A lay7PRE -m layer7 --l7proto smtp -j MARK --set-mark 1 iptables -t mangle -A lay7PRE -m mark --mark 1 -j CONNMARK --save-mark iptables -t mangle -A lay7PRE -m layer7 --l7proto ssh -j MARK --set-mark 2 iptables -t mangle -A lay7PRE -m mark --mark 2 -j CONNMARK --save-mark
### POSTROUTING RULES ###
iptables -t mangle -A ipp2pPOST -o eth1 -m mark --mark 10 -j CLASSIFY --set-class 2:6
iptables -t mangle -A lay7POST -o eth1 -m mark --mark 1 -j CLASSIFY --set-class 2:2
iptables -t mangle -A lay7POST -o eth1 -m mark --mark 2 -j CLASSIFY --set-class 2:3
### -------------------------------------------------------------------- ### iptables -t mangle -A PREROUTING -j lay7PRE
iptables -t mangle -A POSTROUTING -j lay7POST
iptables -t mangle -A PREROUTING -j ipp2pPRE
iptables -t mangle -A POSTROUTING -j ipp2pPOST
### TCNG RULES ###
#define UPLOAD eth1
#define UPRATE 25kBps
#define P2P 10kBps
dev UPLOAD {
egress {
class ( <$smtp> ) ;
class ( <$ssh> ) if tcp_dport = 8080 ;
class ( <$ack> )
if ip_hl = 0x5 &&
(ip_len & 0xffc0) &&
(raw[33].b >> 4) & 1 ;
class ( <$otro> ) if 1 ;
class ( <$p2p> ) ;
htb () {
class ( rate UPRATE, ceil UPRATE ) {
$smtp = class ( prio 1, rate 6kBps, ceil 12kBps ) { sfq; } ;
$ssh = class ( prio 0, rate 3kBps, ceil
5kBps ) { sfq; } ;
$ack = class ( prio 2, rate 8kBps, ceil
15kBps ) { sfq; } ;
$otro = class ( prio 1, rate 8kBps, ceil
UPRATE ) { sfq; }
$p2p = class ( prio 8, rate P2P, ceil P2P,
cburst 0bits ) { sfq; } ;
}
}
}
}EDGAR MERINO
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Edgar wrote:
I've never used ipp2p/l7 connmark or tcng, but usually when using connmark I would expect to see --restore-mark somewhere.
If the PC running bittorrent is linux+python a workaround would be to add another address to its eth and -bind bittorrent to that. I don't know if thats possible with other OS/bt software.
Andy.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc