Skip to contentSkip to conversation

Question about TCNG

LARTC Edgar 2 participants 2 messages Jul 9, 2005

lore
Share & tools
lore

Edgar

author
#0 lore raw

Hello, after compiling my tcng rules, I've noticed something weird, the tc filter rules it returns give a flowid differente than the classes it creates, for example, you have a class 2:3 and had defined some conditions, (eg. some ports) to go into that class, but when I compile the .tcc file it returns something like:
tc filter add dev eth1 parent 1:0 protocol all prio 1 u32 match u8 0x5 0xf at
0 match u8 0x10 0x10 at 33 classid 1:2

it gives the same classid for all the matches I made (meaning for different classes) and that class doesn't even exist! can someone explain me this please? thank you

EDGAR MERINO
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#1 lore raw
Quoted 9 lines · Edgar

Hello, after compiling my tcng rules, I've noticed something weird, the tc filter rules it returns give a flowid differente than the classes it creates, for example, you have a class 2:3 and had defined some conditions, (eg. some ports) to go into that class, but when I compile the .tcc file it returns something like:
tc filter add dev eth1 parent 1:0 protocol all prio 1 u32 match u8 0x5 0xf at
0 match u8 0x10 0x10 at 33 classid 1:2

Quoted 5 lines

it gives the same classid for all the matches I made (meaning for different classes) and that class doesn't even exist! can someone explain me this please? thank you

EDGAR MERINO

Rather than ask the list, why not ask the developer(s)? Better yet, switch to tc.
--
gypsy
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc