Skip to contentSkip to conversation

Current kexec status?

DISCUSSION Ralf Hildebrandt 2 participants 5 messages Jul 13, 2005 – Jul 14, 2005

lore
Share & tools
lore
#0 lore raw

I want to experiment with kexec and my 2.6.13-rc3 kernel. I'm able to --load the kernel, but on --exec in /etc/init.d/reboot (I replaced the reboot command in there), the machine freezes.

I'm using kexec-tools-1.101, are there any more patches needed?

Signature · 4 lines
Ralf Hildebrandt (i.A. des IT-Zentrums)         [email protected]
Charite - Universitätsmedizin Berlin            Tel.  +49 (0)30-450 570-155
Gemeinsame Einrichtung von FU- und HU-Berlin    Fax.  +49 (0)30-450 570-962
IT-Zentrum Standort CBF                 send no mail to [email protected]
#1 lore raw
Quoted 3 lines · Ralf Hildebrandt

I want to experiment with kexec and my 2.6.13-rc3 kernel. I'm able to --load the kernel, but on --exec in /etc/init.d/reboot (I replaced the reboot command in there), the machine freezes.

Can you give more details like
- Which distro release you are running.
- Exactly what changes did you do to /etc/init.d/reboot and what steps did you follow to load the kernel (command line options).
- What do you see on screen? Did the new kernel start booting at all.
- Would be nice if I can get serial console output.

Quoted 3 lines

I'm using kexec-tools-1.101, are there any more patches needed?

For normal kexec, no. You don't need any more patches.

Thanks
Vivek

#2 lore raw

* Vivek Goyal <[email protected]>:

Quoted 2 lines

Can you give more details like
- Which distro release you are running.

Debian unstable; since it has no kexec-tools, I built those from source.

Quoted 2 lines

- Exactly what changes did you do to /etc/init.d/reboot and what steps did you follow to load the kernel (command line options).

/etc/init.d/reboot:
===================

echo -n "Rebooting... "
#reboot -d -f -i
/usr/local/sbin/kexec -f --exec --debug

Loading the Kernel in /etc/init.d/umountfs, before umount'ing /boot:
====================================================================

echo -n "Loading kernel for kexec()..."
/usr/local/sbin/kexec --load /vmlinuz
echo "done."

Quoted 1 line

- What do you see on screen? Did the new kernel start booting at all.

Nope, no booting. I get one line of output which I don't remember; I'll have to retry.

Quoted 1 line

- Would be nice if I can get serial console output.

Sorry, no serial port here.

Signature · 4 lines
Ralf Hildebrandt (i.A. des IT-Zentrums)         [email protected]
Charite - Universitätsmedizin Berlin            Tel.  +49 (0)30-450 570-155
Gemeinsame Einrichtung von FU- und HU-Berlin    Fax.  +49 (0)30-450 570-962
IT-Zentrum Standort CBF                 send no mail to [email protected]
#3 lore raw

* Ralf Hildebrandt <[email protected]>:

Quoted 2 lines

Nope, no booting. I get one line of output which I don't remember; I'll have to retry.

Retried:
"Starting new kernel" -- and that's it!

Signature · 4 lines
Ralf Hildebrandt (i.A. des IT-Zentrums)         [email protected]
Charite - Universitätsmedizin Berlin            Tel.  +49 (0)30-450 570-155
Gemeinsame Einrichtung von FU- und HU-Berlin    Fax.  +49 (0)30-450 570-962
IT-Zentrum Standort CBF                 send no mail to [email protected]
#4 lore raw
In reply to Ralf Hildebrandt
Quoted 17 lines · Ralf Hildebrandt

* Vivek Goyal <[email protected]>:

Quoted 2 lines

Can you give more details like
- Which distro release you are running.

Debian unstable; since it has no kexec-tools, I built those from source.

Quoted 2 lines

- Exactly what changes did you do to /etc/init.d/reboot and what steps did you follow to load the kernel (command line options).

/etc/init.d/reboot:
===================

echo -n "Rebooting... "
#reboot -d -f -i
/usr/local/sbin/kexec -f --exec --debug

Quoted 7 lines

Loading the Kernel in /etc/init.d/umountfs, before umount'ing /boot:
====================================================================

echo -n "Loading kernel for kexec()..."
/usr/local/sbin/kexec --load /vmlinuz
echo "done."

Please copy all the mails related to kexec and kdump problems to fastboot mailing list also ([email protected]).

Instead of modifying reboot scripts, first can you try following simple steps from shell.

1. Load the kernel.
#kexec -l <kernel-image> --append=<boot time options>

2. Drop to run level 3

# init 3

3. Exec into second kernel

# kexec -e

Thanks
Vivek