aic byteorder fixes after recent cleanup

aic doesnt work anymore after this change which appeared int 2.6.13-rc1:
[SCSI] aic7xxx/aic79xx: remove useless byte order macro cruft

2 files did not include byteorder.h, aic died with panic "Unknown opcode encountered in seq program" This patch fixes it for me.

SCSI subsystem initialized
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 2940B Ultra2 SCSI adapter>
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs

Vendor: IBM Model: DDRS-39130D Rev: DC2A
Type: Direct-Access ANSI SCSI revision: 02
target0:0:0: asynchronous.
scsi0:A:0:0: Tagged Queuing enabled. Depth 32
target0:0:0: Beginning Domain Validation
target0:0:0: wide asynchronous.
target0:0:0: Domain Validation skipping write tests target0:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 15) target0:0:0: Ending Domain Validation
SCSI device sda: 17850000 512-byte hdwr sectors (9139 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 17850000 512-byte hdwr sectors (9139 MB)
SCSI device sda: drive cache: write back
sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: IBM Model: DNES-318350W Rev: SA30
Type: Direct-Access ANSI SCSI revision: 03
target0:0:2: asynchronous.
scsi0:A:2:0: Tagged Queuing enabled. Depth 32
target0:0:2: Beginning Domain Validation
target0:0:2: wide asynchronous.
target0:0:2: Domain Validation skipping write tests target0:0:2: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) target0:0:2: Ending Domain Validation
SCSI device sdb: 35843670 512-byte hdwr sectors (18352 MB) SCSI device sdb: drive cache: write back
SCSI device sdb: 35843670 512-byte hdwr sectors (18352 MB) SCSI device sdb: drive cache: write back
sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12
Attached scsi disk sdb at scsi0, channel 0, id 2, lun 0

 drivers/scsi/aic7xxx/aicasm/aicasm.c           |    4 ++--
 drivers/scsi/aic7xxx/aicasm/aicasm_insformat.h |    8 +++++---
 2 files changed, 7 insertions(+), 5 deletions(-)

Index: linux-2.6.12.aic-fixing/drivers/scsi/aic7xxx/aicasm/aicasm.c
===================================================================
@@ -369,7 +369,7 @@ output_code()
 
 		fprintf(ofile, "%s\t0x%02x, 0x%02x, 0x%02x, 0x%02x",
 			cur_instr == STAILQ_FIRST(&seq_program) ? "" : ",\n",
-#if BYTE_ORDER == LITTLE_ENDIAN
+#ifdef __LITTLE_ENDIAN
 			cur_instr->format.bytes[0],
 			cur_instr->format.bytes[1],
 			cur_instr->format.bytes[2],

@@ -613,7 +613,7 @@ output_listing(char *ifilename)
 				line++;
 		}
 		fprintf(listfile, "%03x %02x%02x%02x%02x", instrptr,
-#if BYTE_ORDER == LITTLE_ENDIAN
+#ifdef __LITTLE_ENDIAN
 			cur_instr->format.bytes[0],
 			cur_instr->format.bytes[1],
 			cur_instr->format.bytes[2],

Index: linux-2.6.12.aic-fixing/drivers/scsi/aic7xxx/aicasm/aicasm_insformat.h
===================================================================
@@ -42,8 +42,10 @@
  * $FreeBSD$
  */
 
+#include <asm/byteorder.h>
+
 struct ins_format1 {
-#if BYTE_ORDER == LITTLE_ENDIAN
+#ifdef __LITTLE_ENDIAN
 	uint32_t	immediate	: 8,
 			source		: 9,
 			destination	: 9,

@@ -61,7 +63,7 @@ struct ins_format1 {
 };
 
 struct ins_format2 {
-#if BYTE_ORDER == LITTLE_ENDIAN
+#ifdef __LITTLE_ENDIAN
 	uint32_t	shift_control	: 8,
 			source		: 9,
 			destination	: 9,

@@ -79,7 +81,7 @@ struct ins_format2 {
 };
 
 struct ins_format3 {
-#if BYTE_ORDER == LITTLE_ENDIAN
+#ifdef __LITTLE_ENDIAN
 	uint32_t	immediate	: 8,
 			source		: 9,
 			address		: 10,