ALSA, snd_intel8x0m and kexec() don't work together (2.6.13-rc3-git4 and 2.6.13-rc3-git3)
Whenever I use kexec() to reboot into a new kernel, sound doesn't work properly. KDE doesn't display a mixer.
All modules seem to be loaded, though - and after a reboot using "reboot" instead of "kexec", sound works flawlessly with the same setup.
/etc/init.d/alsa restart doesn't change things, either.
The one message strinking me as odd during the boot-process is:
Jul 21 19:50:01 kasbah kernel: AC'97 warm reset still in progress? [0xffffffff]
# lsmod Module Size Used by pcmcia 32232 4 firmware_class 7872 1 pcmcia thermal 10504 0 fan 3204 0 button 2944 0 ac 3332 0 battery 7556 0 mousedev 10016 1 tsdev 5888 0 evdev 7488 0 psmouse 32388 0 rtc 10936 0 yenta_socket 22668 4 rsrc_nonstatic 11968 1 yenta_socket pcmcia_core 35920 3 pcmcia,yenta_socket,rsrc_nonstatic 8250_pci 17472 0 8250 22820 1 8250_pci serial_core 19904 1 8250 snd_intel8x0m 15428 0 usbhid 34464 0 snd_intel8x0 29440 0 snd_ac97_codec 82556 2 snd_intel8x0m,snd_intel8x0 ehci_hcd 32200 0 ohci_hcd 19844 0 vfat 11072 0 fat 46492 1 vfat nls_base 6400 2 vfat,fat i2c_nforce2 5760 0 i2c_core 17424 1 i2c_nforce2 ndiswrapper 129204 0 usbcore 110972 5 usbhid,ehci_hcd,ohci_hcd,ndiswrapper snd_pcm_oss 49440 0 snd_pcm 83400 4 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_timer 22276 1 snd_pcm snd_page_alloc 8392 3 snd_intel8x0m,snd_intel8x0,snd_pcm snd_mixer_oss 17408 1 snd_pcm_oss snd 47204 7 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss soundcore 7520 1 snd ide_cd 37956 0 cdrom 37792 1 ide_cd cpufreq_userspace 3420 0 powernow_k8 11144 0 freq_table 3460 1 powernow_k8 processor 18684 2 thermal,powernow_k8 unix 23856 590
# lspci 0000:00:00.0 Host bridge: nVidia Corporation nForce3 Host Bridge (rev a4) 0000:00:01.0 ISA bridge: nVidia Corporation nForce3 LPC Bridge (rev a6) 0000:00:01.1 SMBus: nVidia Corporation nForce3 SMBus (rev a4) 0000:00:02.0 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5) 0000:00:02.1 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5) 0000:00:02.2 USB Controller: nVidia Corporation nForce3 USB 2.0 (rev a2) 0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce3 Audio (rev a2) 0000:00:06.1 Modem: nVidia Corporation: Unknown device 00d9 (rev a2) 0000:00:08.0 IDE interface: nVidia Corporation nForce3 IDE (rev a5) 0000:00:0a.0 PCI bridge: nVidia Corporation nForce3 PCI Bridge (rev a2) 0000:00:0b.0 PCI bridge: nVidia Corporation nForce3 AGP Bridge (rev a4) 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 420 Go 32M] (rev a3) 0000:02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:02:02.0 Network controller: Broadcom Corporation BCM4301 802.11b (rev 02) 0000:02:04.0 CardBus bridge: Texas Instruments: Unknown device ac54 (rev 01) 0000:02:04.1 CardBus bridge: Texas Instruments: Unknown device ac54 (rev 01) 0000:02:04.2 System peripheral: Texas Instruments: Unknown device 8201 (rev 01)
The log of a reboot using kexec():
Jul 21 19:50:01 kasbah kernel: klogd 1.4.1#17, log source = /proc/kmsg started. Jul 21 19:50:01 kasbah kernel: Inspecting /boot/System.map-2.6.13-rc3-git4 Jul 21 19:50:01 kasbah kernel: Loaded 26210 symbols from /boot/System.map-2.6.13-rc3-git4. Jul 21 19:50:01 kasbah kernel: Symbols match kernel version 2.6.13. Jul 21 19:50:01 kasbah kernel: No module symbols loaded - kernel modules not enabled. Jul 21 19:50:01 kasbah kernel: Linux version 2.6.13-rc3-git4 (root@kasbah) (gcc version 3.4.5 20050706 (prerelease) (Debian 3.4.4-5)) #1 Thu Jul 21 19:31:46 CEST 2005 Jul 21 19:50:01 kasbah kernel: BIOS-provided physical RAM map: Jul 21 19:50:01 kasbah kernel: BIOS-e820: 0000000000000100 - 000000000009f800 (usable) Jul 21 19:50:01 kasbah kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Jul 21 19:50:01 kasbah kernel: BIOS-e820: 0000000000100000 - 000000001ff70000 (usable) Jul 21 19:50:01 kasbah kernel: BIOS-e820: 000000001ff70000 - 000000001ff7f000 (ACPI data) Jul 21 19:50:01 kasbah kernel: BIOS-e820: 000000001ff7f000 - 000000001ff80000 (ACPI NVS) Jul 21 19:50:01 kasbah kernel: BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) Jul 21 19:50:01 kasbah kernel: BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) Jul 21 19:50:01 kasbah kernel: 511MB LOWMEM available. Jul 21 19:50:01 kasbah kernel: On node 0 totalpages: 130928 Jul 21 19:50:01 kasbah kernel: DMA zone: 4096 pages, LIFO batch:1 Jul 21 19:50:01 kasbah kernel: Normal zone: 126832 pages, LIFO batch:31 Jul 21 19:50:01 kasbah kernel: HighMem zone: 0 pages, LIFO batch:1 Jul 21 19:50:01 kasbah kernel: DMI present. Jul 21 19:50:01 kasbah kernel: ACPI: RSDP (v000 PTLTD ) @ 0x000f72a0 Jul 21 19:50:01 kasbah kernel: ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1ff7a9b2 Jul 21 19:50:01 kasbah kernel: ACPI: FADT (v001 NVIDIA CK8 0x06040000 PTL_ 0x000f4240) @ 0x1ff7ee13 Jul 21 19:50:01 kasbah kernel: ACPI: MADT (v001 NVIDIA NV_APIC_ 0x06040000 LTP 0x00000000) @ 0x1ff7ee87 Jul 21 19:50:01 kasbah kernel: ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1ff7eee1 Jul 21 19:50:01 kasbah kernel: ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x1ff7ef09 Jul 21 19:50:01 kasbah kernel: ACPI: DSDT (v001 NVIDIA CK8 0x06040000 MSFT 0x0100000e) @ 0x00000000 Jul 21 19:50:01 kasbah kernel: ACPI: PM-Timer IO Port: 0x8008 Jul 21 19:50:01 kasbah kernel: ACPI: Local APIC address 0xfee00000 Jul 21 19:50:01 kasbah kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Jul 21 19:50:01 kasbah kernel: Processor #0 15:4 APIC version 16 Jul 21 19:50:01 kasbah kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Jul 21 19:50:01 kasbah kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Jul 21 19:50:01 kasbah kernel: IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 Jul 21 19:50:01 kasbah kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Jul 21 19:50:01 kasbah kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Jul 21 19:50:01 kasbah kernel: ACPI: BIOS IRQ0 pin2 override ignored. Jul 21 19:50:01 kasbah kernel: ACPI: IRQ9 used by override. Jul 21 19:50:01 kasbah kernel: Enabling APIC mode: Flat. Using 1 I/O APICs Jul 21 19:50:01 kasbah kernel: Using ACPI (MADT) for SMP configuration information Jul 21 19:50:01 kasbah kernel: Allocating PCI resources starting at 20000000 (gap: 20000000:dff80000) Jul 21 19:50:01 kasbah kernel: Built 1 zonelists Jul 21 19:50:01 kasbah kernel: Kernel command line: boot=/dev/hda root=/dev/hda3 Jul 21 19:50:01 kasbah kernel: mapped APIC to ffffd000 (fee00000) Jul 21 19:50:01 kasbah kernel: mapped IOAPIC to ffffc000 (fec00000) Jul 21 19:50:01 kasbah kernel: Initializing CPU#0 Jul 21 19:50:01 kasbah kernel: CPU 0 irqstacks, hard=c03bf000 soft=c03be000 Jul 21 19:50:01 kasbah kernel: PID hash table entries: 2048 (order: 11, 32768 bytes) Jul 21 19:50:01 kasbah kernel: Detected 1596.060 MHz processor. Jul 21 19:50:01 kasbah kernel: Using pmtmr for high-res timesource Jul 21 19:50:01 kasbah kernel: Console: colour VGA+ 80x25 Jul 21 19:50:01 kasbah kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Jul 21 19:50:01 kasbah kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Jul 21 19:50:01 kasbah kernel: Memory: 515244k/523712k available (1854k kernel code, 7908k reserved, 750k data, 176k init, 0k highmem) Jul 21 19:50:01 kasbah kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok. Jul 21 19:50:01 kasbah kernel: Calibrating delay using timer specific routine.. 3195.35 BogoMIPS (lpj=6390713) Jul 21 19:50:01 kasbah kernel: Mount-cache hash table entries: 512 Jul 21 19:50:01 kasbah kernel: CPU: After generic identify, caps: 078bfbff c1d3fbff 00000000 00000000 00000000 00000000 00000000 Jul 21 19:50:01 kasbah kernel: CPU: After vendor identify, caps: 078bfbff c1d3fbff 00000000 00000000 00000000 00000000 00000000 Jul 21 19:50:01 kasbah kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Jul 21 19:50:01 kasbah kernel: CPU: L2 Cache: 256K (64 bytes/line) Jul 21 19:50:01 kasbah kernel: CPU: After all inits, caps: 078bfbff c1d3fbff 00000000 00000010 00000000 00000000 00000000 Jul 21 19:50:01 kasbah kernel: Intel machine check architecture supported. Jul 21 19:50:01 kasbah kernel: Intel machine check reporting enabled on CPU#0. Jul 21 19:50:01 kasbah kernel: mtrr: v2.0 (20020519) Jul 21 19:50:01 kasbah kernel: CPU: AMD Athlon(tm) XP Processor 3000+ stepping 08 Jul 21 19:50:01 kasbah kernel: Enabling fast FPU save and restore... done. Jul 21 19:50:01 kasbah kernel: Enabling unmasked SIMD FPU exception support... done. Jul 21 19:50:01 kasbah kernel: Checking 'hlt' instruction... OK. Jul 21 19:50:01 kasbah kernel: ENABLING IO-APIC IRQs Jul 21 19:50:01 kasbah kernel: ..TIMER: vector=0x31 pin1=0 pin2=-1 Jul 21 19:50:01 kasbah kernel: NET: Registered protocol family 16 Jul 21 19:50:01 kasbah kernel: ACPI: bus type pci registered Jul 21 19:50:01 kasbah kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd8bc, last bus=2 Jul 21 19:50:01 kasbah kernel: PCI: Using configuration type 1 Jul 21 19:50:01 kasbah kernel: ACPI: Subsystem revision 20050408 Jul 21 19:50:01 kasbah kernel: ACPI: Interpreter enabled Jul 21 19:50:01 kasbah kernel: ACPI: Using IOAPIC for interrupt routing Jul 21 19:50:01 kasbah kernel: ACPI: PCI Root Bridge [PCI0] (0000:00) Jul 21 19:50:01 kasbah kernel: PCI: Probing PCI hardware (bus 00) Jul 21 19:50:01 kasbah kernel: ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 Jul 21 19:50:01 kasbah kernel: Boot video device is 0000:01:00.0 Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Jul 21 19:50:01 kasbah kernel: ACPI: Embedded Controller [EC0] (gpe 33) Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT] Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 16 18 *19) Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt Link [LNK2] (IRQs 16 *18 19) Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt Link [LNK3] (IRQs *17) Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt Link [LNK4] (IRQs 16 18 19) *0, disabled. Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt Link [LNK5] (IRQs 16 18 19) *0, disabled. Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22) *0, disabled. Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 *22) Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt Link [LUS1] (IRQs 20 *21 22) Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt Link [LUS2] (IRQs *20 21 22) Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22) *0, disabled. Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 *22) Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt Link [LMCI] (IRQs 20 *21 22) Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22) *0, disabled. Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0, disabled. Jul 21 19:50:01 kasbah kernel: Linux Plug and Play Support v0.97 (c) Adam Belay Jul 21 19:50:01 kasbah kernel: pnp: PnP ACPI init Jul 21 19:50:01 kasbah kernel: pnp: PnP ACPI: found 12 devices Jul 21 19:50:01 kasbah kernel: PCI: Using ACPI for IRQ routing Jul 21 19:50:01 kasbah kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Jul 21 19:50:01 kasbah kernel: PCI: Bus 3, cardbus bridge: 0000:02:04.0 Jul 21 19:50:01 kasbah kernel: IO window: 00003000-00003fff Jul 21 19:50:01 kasbah kernel: IO window: 00004000-00004fff Jul 21 19:50:01 kasbah kernel: PREFETCH window: 20000000-21ffffff Jul 21 19:50:01 kasbah kernel: PCI: Bus 7, cardbus bridge: 0000:02:04.1 Jul 21 19:50:01 kasbah kernel: IO window: 00005000-00005fff Jul 21 19:50:01 kasbah kernel: IO window: 00006000-00006fff Jul 21 19:50:01 kasbah kernel: PREFETCH window: 22000000-23ffffff Jul 21 19:50:01 kasbah kernel: PCI: Bridge: 0000:00:0a.0 Jul 21 19:50:01 kasbah kernel: IO window: 3000-7fff Jul 21 19:50:01 kasbah kernel: MEM window: e8100000-e97fffff Jul 21 19:50:01 kasbah kernel: PREFETCH window: 20000000-23ffffff Jul 21 19:50:01 kasbah kernel: PCI: Bridge: 0000:00:0b.0 Jul 21 19:50:01 kasbah kernel: IO window: disabled. Jul 21 19:50:01 kasbah kernel: MEM window: ea000000-eaffffff Jul 21 19:50:01 kasbah kernel: PREFETCH window: f8000000-fc0fffff Jul 21 19:50:01 kasbah kernel: PCI: Setting latency timer of device 0000:00:0a.0 to 64 Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 19 Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNK1] -> GSI 19 (level, low) -> IRQ 16 Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 18 Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt 0000:02:04.1[B] -> Link [LNK2] -> GSI 18 (level, low) -> IRQ 17 Jul 21 19:50:01 kasbah kernel: TC classifier action (bugs to [email protected] cc [email protected]) Jul 21 19:50:01 kasbah kernel: pnp: 00:00: ioport range 0x8000-0x807f could not be reserved Jul 21 19:50:01 kasbah kernel: pnp: 00:00: ioport range 0x8080-0x80ff has been reserved Jul 21 19:50:01 kasbah kernel: pnp: 00:00: ioport range 0x8400-0x847f has been reserved Jul 21 19:50:01 kasbah kernel: pnp: 00:00: ioport range 0x8480-0x84ff could not be reserved Jul 21 19:50:01 kasbah kernel: pnp: 00:00: ioport range 0x8800-0x887f has been reserved Jul 21 19:50:01 kasbah kernel: pnp: 00:00: ioport range 0x8880-0x88ff has been reserved Jul 21 19:50:01 kasbah kernel: pnp: 00:00: ioport range 0x2040-0x207f has been reserved Jul 21 19:50:01 kasbah kernel: pnp: 00:00: ioport range 0x2000-0x203f has been reserved Jul 21 19:50:01 kasbah kernel: Simple Boot Flag at 0x36 set to 0x1 Jul 21 19:50:01 kasbah kernel: Initializing Cryptographic API Jul 21 19:50:01 kasbah kernel: lp: driver loaded but no devices found Jul 21 19:50:01 kasbah kernel: Linux agpgart interface v0.101 (c) Dave Jones Jul 21 19:50:01 kasbah kernel: [drm] Initialized drm 1.0.0 20040925 Jul 21 19:50:01 kasbah kernel: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 Jul 21 19:50:01 kasbah kernel: i8042.c: Detected active multiplexing controller, rev 1.1. Jul 21 19:50:01 kasbah kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12 Jul 21 19:50:01 kasbah kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12 Jul 21 19:50:01 kasbah kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12 Jul 21 19:50:01 kasbah kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12 Jul 21 19:50:01 kasbah kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Jul 21 19:50:01 kasbah kernel: parport: PnPBIOS parport detected. Jul 21 19:50:01 kasbah kernel: parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] Jul 21 19:50:01 kasbah kernel: parport0: Printer, HEWLETT-PACKARD DESKJET 670C Jul 21 19:50:01 kasbah kernel: lp0: using parport0 (interrupt-driven). Jul 21 19:50:01 kasbah kernel: io scheduler noop registered Jul 21 19:50:01 kasbah kernel: io scheduler anticipatory registered Jul 21 19:50:01 kasbah kernel: io scheduler deadline registered Jul 21 19:50:01 kasbah kernel: io scheduler cfq registered Jul 21 19:50:01 kasbah kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Jul 21 19:50:01 kasbah kernel: NET: Registered protocol family 24 Jul 21 19:50:01 kasbah kernel: 8139too Fast Ethernet driver 0.9.27 Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNK2] -> GSI 18 (level, low) -> IRQ 17 Jul 21 19:50:01 kasbah kernel: eth0: RealTek RTL8139 at 0x7000, 00:02:3f:22:c0:9d, IRQ 17 Jul 21 19:50:01 kasbah kernel: eth0: Identified 8139 chip type 'RTL-8101' Jul 21 19:50:01 kasbah kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Jul 21 19:50:01 kasbah kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Jul 21 19:50:01 kasbah kernel: NFORCE3-150: IDE controller at PCI slot 0000:00:08.0 Jul 21 19:50:01 kasbah kernel: NFORCE3-150: chipset revision 165 Jul 21 19:50:01 kasbah kernel: NFORCE3-150: not 100%% native mode: will probe irqs later Jul 21 19:50:01 kasbah kernel: NFORCE3-150: BIOS didn't set cable bits correctly. Enabling workaround. Jul 21 19:50:01 kasbah kernel: NFORCE3-150: 0000:00:08.0 (rev a5) UDMA133 controller Jul 21 19:50:01 kasbah kernel: ide0: BM-DMA at 0x2080-0x2087, BIOS settings: hda:DMA, hdb:pio Jul 21 19:50:01 kasbah kernel: ide1: BM-DMA at 0x2088-0x208f, BIOS settings: hdc:DMA, hdd:pio Jul 21 19:50:01 kasbah kernel: Probing IDE interface ide0... Jul 21 19:50:01 kasbah kernel: hda: ST94019A, ATA DISK drive Jul 21 19:50:01 kasbah kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Jul 21 19:50:01 kasbah kernel: Probing IDE interface ide1... Jul 21 19:50:01 kasbah kernel: hdc: SD-R6252, ATAPI CD/DVD-ROM drive Jul 21 19:50:01 kasbah kernel: ide1 at 0x170-0x177,0x376 on irq 15 Jul 21 19:50:01 kasbah kernel: hda: max request size: 1024KiB Jul 21 19:50:01 kasbah kernel: hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) Jul 21 19:50:01 kasbah kernel: hda: cache flushes supported Jul 21 19:50:01 kasbah kernel: hda: hda1 hda2 hda3 Jul 21 19:50:01 kasbah kernel: NET: Registered protocol family 2 Jul 21 19:50:01 kasbah kernel: IP route cache hash table entries: 8192 (order: 3, 32768 bytes) Jul 21 19:50:01 kasbah kernel: TCP established hash table entries: 32768 (order: 6, 262144 bytes) Jul 21 19:50:01 kasbah kernel: TCP bind hash table entries: 32768 (order: 5, 131072 bytes) Jul 21 19:50:01 kasbah kernel: TCP: Hash tables configured (established 32768 bind 32768) Jul 21 19:50:01 kasbah kernel: TCP reno registered Jul 21 19:50:01 kasbah kernel: Using IPI Shortcut mode Jul 21 19:50:01 kasbah kernel: ACPI wakeup devices: Jul 21 19:50:01 kasbah kernel: USB0 USB1 USB2 MAC0 Jul 21 19:50:01 kasbah kernel: ACPI: (supports S0 S3 S4 S5) Jul 21 19:50:01 kasbah kernel: input: AT Raw Set 2 keyboard on isa0060/serio0 Jul 21 19:50:01 kasbah kernel: EXT3-fs: mounted filesystem with ordered data mode. Jul 21 19:50:01 kasbah kernel: VFS: Mounted root (ext3 filesystem) readonly. Jul 21 19:50:01 kasbah kernel: Freeing unused kernel memory: 176k freed Jul 21 19:50:01 kasbah kernel: kjournald starting. Commit interval 5 seconds Jul 21 19:50:01 kasbah kernel: NET: Registered protocol family 1 Jul 21 19:50:01 kasbah kernel: Adding 996020k swap on /dev/hda2. Priority:-1 extents:1 Jul 21 19:50:01 kasbah kernel: EXT3 FS on hda3, internal journal Jul 21 19:50:01 kasbah kernel: ACPI: CPU0 (power states: C1[C1]) Jul 21 19:50:01 kasbah kernel: powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.40.2) Jul 21 19:50:01 kasbah kernel: powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x6 (1400 mV) Jul 21 19:50:01 kasbah kernel: powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x18 (950 mV) Jul 21 19:50:01 kasbah kernel: cpu_init done, current fid 0x8, vid 0x6 Jul 21 19:50:01 kasbah kernel: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, DMA Jul 21 19:50:01 kasbah kernel: Uniform CD-ROM driver Revision: 3.20 Jul 21 19:50:01 kasbah kernel: usbcore: registered new driver usbfs Jul 21 19:50:01 kasbah kernel: usbcore: registered new driver hub Jul 21 19:50:01 kasbah kernel: ndiswrapper version 1.1 loaded (preempt=yes,smp=no) Jul 21 19:50:01 kasbah kernel: ndiswrapper: driver bcmwl5a (ASUS,07/17/2003, 3.30.15.0) loaded Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 17 Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNK3] -> GSI 17 (level, low) -> IRQ 18 Jul 21 19:50:01 kasbah kernel: ndiswrapper: using irq 18 Jul 21 19:50:01 kasbah kernel: wlan0: ndiswrapper ethernet device 00:90:4b:57:40:c9 using driver bcmwl5a, configuration file 14E4:4301.5.conf Jul 21 19:50:01 kasbah kernel: wlan0: encryption modes supported: WEP, WPA with TKIP Jul 21 19:50:01 kasbah kernel: i2c_adapter i2c-0: nForce2 SMBus adapter at 0x2040 Jul 21 19:50:01 kasbah kernel: i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2000 Jul 21 19:50:01 kasbah kernel: kjournald starting. Commit interval 5 seconds Jul 21 19:50:01 kasbah kernel: EXT3 FS on hda1, internal journal Jul 21 19:50:01 kasbah kernel: EXT3-fs: mounted filesystem with ordered data mode. Jul 21 19:50:01 kasbah kernel: ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22 (level, low) -> IRQ 19 Jul 21 19:50:01 kasbah kernel: PCI: Setting latency timer of device 0000:00:02.0 to 64 Jul 21 19:50:01 kasbah kernel: ohci_hcd 0000:00:02.0: nVidia Corporation nForce3 USB 1.1 Jul 21 19:50:01 kasbah kernel: ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 Jul 21 19:50:01 kasbah kernel: ohci_hcd 0000:00:02.0: irq 19, io mem 0xe8000000 Jul 21 19:50:01 kasbah kernel: hub 1-0:1.0: USB hub found Jul 21 19:50:01 kasbah kernel: hub 1-0:1.0: 3 ports detected Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 21 Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 21 (level, low) -> IRQ 20 Jul 21 19:50:01 kasbah kernel: PCI: Setting latency timer of device 0000:00:02.1 to 64 Jul 21 19:50:01 kasbah kernel: ohci_hcd 0000:00:02.1: nVidia Corporation nForce3 USB 1.1 (#2) Jul 21 19:50:01 kasbah kernel: ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 Jul 21 19:50:01 kasbah kernel: ohci_hcd 0000:00:02.1: irq 20, io mem 0xe8001000 Jul 21 19:50:01 kasbah kernel: hub 2-0:1.0: USB hub found Jul 21 19:50:01 kasbah kernel: hub 2-0:1.0: 3 ports detected Jul 21 19:50:01 kasbah kernel: usb 1-2: new low speed USB device using ohci_hcd and address 2 Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20 Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 20 (level, low) -> IRQ 21 Jul 21 19:50:01 kasbah kernel: PCI: Setting latency timer of device 0000:00:02.2 to 64 Jul 21 19:50:01 kasbah kernel: ehci_hcd 0000:00:02.2: nVidia Corporation nForce3 USB 2.0 Jul 21 19:50:01 kasbah kernel: ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 Jul 21 19:50:01 kasbah kernel: ehci_hcd 0000:00:02.2: irq 21, io mem 0xe8004000 Jul 21 19:50:01 kasbah kernel: PCI: cache line size of 64 is not supported by device 0000:00:02.2 Jul 21 19:50:01 kasbah kernel: ehci_hcd 0000:00:02.2: park 0 Jul 21 19:50:01 kasbah kernel: ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 Jul 21 19:50:01 kasbah kernel: hub 3-0:1.0: USB hub found Jul 21 19:50:01 kasbah kernel: hub 3-0:1.0: 6 ports detected Jul 21 19:50:01 kasbah kernel: usb 1-2: device descriptor read/all, error -110 Jul 21 19:50:01 kasbah kernel: usb 1-2: new low speed USB device using ohci_hcd and address 4 Jul 21 19:50:01 kasbah kernel: PCI: Enabling device 0000:00:06.0 (0000 -> 0003) Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt Link [LACI] enabled at IRQ 22 Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LACI] -> GSI 22 (level, low) -> IRQ 19 Jul 21 19:50:01 kasbah kernel: PCI: Setting latency timer of device 0000:00:06.0 to 64 Jul 21 19:50:01 kasbah kernel: usbcore: registered new driver hiddev Jul 21 19:50:01 kasbah kernel: input: USB HID v1.10 Mouse [Genius NetScroll + Mini Traveler] on usb-0000:00:02.0-2 Jul 21 19:50:01 kasbah kernel: usbcore: registered new driver usbhid Jul 21 19:50:01 kasbah kernel: drivers/usb/input/hid-core.c: v2.01:USB HID core driver
Jul 21 19:50:01 kasbah kernel: AC'97 warm reset still in progress? [0xffffffff]
Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt Link [LMCI] enabled at IRQ 21 Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LMCI] -> GSI 21 (level, low) -> IRQ 20 Jul 21 19:50:01 kasbah kernel: PCI: Setting latency timer of device 0000:00:06.1 to 64 Jul 21 19:50:01 kasbah kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNK1] -> GSI 19 (level, low) -> IRQ 16 Jul 21 19:50:01 kasbah kernel: Yenta: CardBus bridge found at 0000:02:04.0 [103c:006d] Jul 21 19:50:01 kasbah kernel: Yenta: Using CSCINT to route CSC interrupts to PCI Jul 21 19:50:01 kasbah kernel: Yenta: Routing CardBus interrupts to PCI Jul 21 19:50:01 kasbah kernel: Yenta TI: socket 0000:02:04.0, mfunc 0x01111d22, devctl 0x64 Jul 21 19:50:01 kasbah kernel: Yenta: ISA IRQ mask 0x0c78, PCI irq 16 Jul 21 19:50:01 kasbah kernel: Socket status: 30000086 Jul 21 19:50:01 kasbah kernel: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff Jul 21 19:50:01 kasbah kernel: cs: IO port probe 0x3000-0x7fff: clean. Jul 21 19:50:01 kasbah kernel: pcmcia: parent PCI bridge Memory window: 0xe8100000 - 0xe97fffff Jul 21 19:50:01 kasbah kernel: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff Jul 21 19:50:01 kasbah kernel: ACPI: PCI Interrupt 0000:02:04.1[B] -> Link [LNK2] -> GSI 18 (level, low) -> IRQ 17 Jul 21 19:50:01 kasbah kernel: Yenta: CardBus bridge found at 0000:02:04.1 [103c:006d] Jul 21 19:50:01 kasbah kernel: Yenta: Using CSCINT to route CSC interrupts to PCI Jul 21 19:50:01 kasbah kernel: Yenta: Routing CardBus interrupts to PCI Jul 21 19:50:01 kasbah kernel: Yenta TI: socket 0000:02:04.1, mfunc 0x01111d22, devctl 0x64 Jul 21 19:50:01 kasbah kernel: Yenta: ISA IRQ mask 0x0c78, PCI irq 17 Jul 21 19:50:01 kasbah kernel: Socket status: 30000086 Jul 21 19:50:01 kasbah kernel: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff Jul 21 19:50:01 kasbah kernel: cs: IO port probe 0x3000-0x7fff: clean. Jul 21 19:50:01 kasbah kernel: pcmcia: parent PCI bridge Memory window: 0xe8100000 - 0xe97fffff Jul 21 19:50:01 kasbah kernel: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff Jul 21 19:50:01 kasbah kernel: Real Time Clock Driver v1.12 Jul 21 19:50:01 kasbah kernel: alps.c: Enabling hardware tapping Jul 21 19:50:01 kasbah kernel: input: PS/2 Mouse on isa0060/serio4 Jul 21 19:50:01 kasbah kernel: input: AlpsPS/2 ALPS GlidePoint on isa0060/serio4 Jul 21 19:50:01 kasbah kernel: ts: Compaq touchscreen protocol output Jul 21 19:50:01 kasbah kernel: mice: PS/2 mouse device common for all mice Jul 21 19:50:01 kasbah kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 Jul 21 19:50:01 kasbah kernel: ACPI: Battery Slot [BAT1] (battery present) Jul 21 19:50:01 kasbah kernel: ACPI: AC Adapter [ACAD] (on-line) Jul 21 19:50:01 kasbah kernel: ACPI: Power Button (FF) [PWRF] Jul 21 19:50:01 kasbah kernel: ACPI: Power Button (CM) [PWRB] Jul 21 19:50:01 kasbah kernel: ACPI: Lid Switch [LID] Jul 21 19:50:02 kasbah kernel: ACPI: Thermal Zone [THRM] (53 C) Jul 21 19:50:03 kasbah kernel: lp0: ECP mode Jul 21 19:50:06 kasbah /usr/sbin/gpm[4783]: Detected EXPS/2 protocol mouse.
Signature · 4 lines
Ralf Hildebrandt (i.A. des IT-Zentrums) [email protected] Charite - Universitätsmedizin Berlin Tel. +49 (0)30-450 570-155 Gemeinsame Einrichtung von FU- und HU-Berlin Fax. +49 (0)30-450 570-962 IT-Zentrum Standort CBF send no mail to [email protected]
* Ralf Hildebrandt <[email protected]>:
Quoted 2 lines
The one message strinking me as odd during the boot-process is:
Jul 21 19:50:01 kasbah kernel: AC'97 warm reset still in progress? [0xffffffff]
More details: If I unload the sounddriver:
# rmmod snd_intel8x0
and the reload it:
# modprobe snd_intel8x0
I get:
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LACI] -> GSI 22 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:06.0 to 64
AC'97 warm reset still in progress? [0xffffffff]
Intel ICH: probe of 0000:00:06.0 failed with error -5
Signature · 4 lines
Ralf Hildebrandt (i.A. des IT-Zentrums) [email protected] Charite - Universitätsmedizin Berlin Tel. +49 (0)30-450 570-155 Gemeinsame Einrichtung von FU- und HU-Berlin Fax. +49 (0)30-450 570-962 IT-Zentrum Standort CBF send no mail to [email protected]
Quoted 11 lines · Ralf Hildebrandt
* Ralf Hildebrandt <[email protected]>:
Quoted 2 lines
The one message strinking me as odd during the boot-process is:
Jul 21 19:50:01 kasbah kernel: AC'97 warm reset still in progress? [0xffffffff]More details: If I unload the sounddriver:
# rmmod snd_intel8x0and the reload it:
Quoted 8 lines
# modprobe snd_intel8x0I get:
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LACI] -> GSI 22 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:06.0 to 64
AC'97 warm reset still in progress? [0xffffffff]
Intel ICH: probe of 0000:00:06.0 failed with error -5
Not happening here on 2.6.12:
# modprobe -r snd_intel8x0 # modprobe snd_intel8x0 # dmesg | tail -4 ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 50417 usecs intel8x0: clocking to 48000 # lspci -n 00:00.0 Class 0600: 8086:1130 (rev 04) 00:02.0 Class 0300: 8086:1132 (rev 04) 00:1e.0 Class 0604: 8086:244e (rev 05) 00:1f.0 Class 0601: 8086:2440 (rev 05) 00:1f.1 Class 0101: 8086:244b (rev 05) 00:1f.2 Class 0c03: 8086:2442 (rev 05) 00:1f.3 Class 0c05: 8086:2443 (rev 05) 00:1f.4 Class 0c03: 8086:2444 (rev 05) 00:1f.5 Class 0401: 8086:2445 (rev 05) 01:08.0 Class 0200: 8086:2449 (rev 03) # lspci 00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 04) 00:02.0 VGA compatible controller: Intel Corp. 82815 CGC [Chipset Graphics Controller] (rev 04) 00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 05) 00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 05) 00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 05) 00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub (rev 05) 00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 05) 00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub (rev 05) 00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 05) 01:08.0 Ethernet controller: Intel Corp. 82801BA/BAM/CA/CAM Ethernet Controller (rev 03)
In your case, 0xffffffff looks like device is disabled. This is where it happens:
static int snd_intel8x0_chip_init(intel8x0_t *chip, int probing)
{
unsigned int i;
int err;
if (chip->device_type != DEVICE_ALI) {
if ((err = snd_intel8x0_ich_chip_init(chip, probing)) < 0)
return err;...
static int snd_intel8x0_ich_chip_init(intel8x0_t *chip, int probing)
{
unsigned long end_time;
unsigned int cnt, status, nstatus;
/* put logic to right state */
/* first clear status bits */
status = ICH_RCS | ICH_MCINT | ICH_POINT | ICH_PIINT;
if (chip->device_type == DEVICE_NFORCE)
status |= ICH_NVSPINT;
cnt = igetdword(chip, ICHREG(GLOB_STA));
iputdword(chip, ICHREG(GLOB_STA), cnt & status);
/* ACLink on, 2 channels */
cnt = igetdword(chip, ICHREG(GLOB_CNT));
cnt &= ~(ICH_ACLINK | ICH_PCM_246_MASK);
/* finish cold or do warm reset */
cnt |= (cnt & ICH_AC97COLD) == 0 ? ICH_AC97COLD : ICH_AC97WARM;
iputdword(chip, ICHREG(GLOB_CNT), cnt);
end_time = (jiffies + (HZ / 4)) + 1;
do {
if ((igetdword(chip, ICHREG(GLOB_CNT)) & ICH_AC97WARM) == 0)
goto __ok;
do_delay(chip);
} while (time_after_eq(end_time, jiffies));
snd_printk("AC'97 warm reset still in progress? [0x%x]\n", igetdword(chip, ICHREG(GLOB_CNT)));
return -EIO;
__ok:...
Dunno what to do next. Shots in the dark:
Did it wok with 2.6.12 for you?
Maybe start adding printks in snd_intel8x0_create(), where snd_intel8x0_chip_init() is eventually called. You want to find out what is the difference in hw behaviour bebween good and bad boot.
Maybe do a superfluous pci_disable_device/pci_enable_device pair there. --
vda
* Denis Vlasenko <[email protected]>:
Quoted 1 line
Not happening here on 2.6.12:
2.6.12 didn't have kexec (unless it's a -mm kernel) So how could you boot using kexec then?
Quoted 10 lines
Dunno what to do next. Shots in the dark:
Did it wok with 2.6.12 for you?
Maybe start adding printks in
snd_intel8x0_create(), wheresnd_intel8x0_chip_init()is eventually called. You want to find out what is the difference in hw behaviour bebween good and bad boot.Maybe do a superfluous pci_disable_device/pci_enable_device pair there.
I can try that.
Signature · 4 lines
Ralf Hildebrandt (i.A. des IT-Zentrums) [email protected] Charite - Universitätsmedizin Berlin Tel. +49 (0)30-450 570-155 Gemeinsame Einrichtung von FU- und HU-Berlin Fax. +49 (0)30-450 570-962 IT-Zentrum Standort CBF send no mail to [email protected]
Quoted 7 lines · Ralf Hildebrandt
* Denis Vlasenko <[email protected]>:
Quoted 1 line
Not happening here on 2.6.12:
2.6.12 didn't have kexec (unless it's a -mm kernel) So how could you boot using kexec then?
Is kexec supposed to be transparent to all the subsystems, or does ALSA have to know how to stop all DMA in order for kexec to work?
Lee
* Lee Revell <[email protected]>:
Quoted 6 lines
Quoted 3 lines
2.6.12 didn't have kexec (unless it's a -mm kernel) So how could you boot using kexec then?
Is kexec supposed to be transparent to all the subsystems, or does ALSA have to know how to stop all DMA in order for kexec to work?
The way I used it was to replace the "reboot" call in /etc/init.d/reboot. So at that time, ALSA was already "stopped" (/etc/init.d/also stop ran) -- shouldn't that suffice?
Kconfig says:
kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot but it is indepedent of the system firmware. And like a reboot you can start any kernel with it, not just Linux.
The name comes from the similiarity to the exec system call.
It is an ongoing process to be certain the hardware in a machine is properly shutdown, so do not be surprised if this code does not initially work for you. It may help to enable device hotplugging support. As of this writing the exact hardware interface is strongly in flux, so no good recommendation can be made.
Signature · 4 lines
Ralf Hildebrandt (i.A. des IT-Zentrums) [email protected] Charite - Universitätsmedizin Berlin Tel. +49 (0)30-450 570-155 Gemeinsame Einrichtung von FU- und HU-Berlin Fax. +49 (0)30-450 570-962 IT-Zentrum Standort CBF send no mail to [email protected]
Quoted 11 lines · Lee Revell
Quoted 7 lines · Ralf Hildebrandt
* Denis Vlasenko <[email protected]>:
Quoted 1 line
Not happening here on 2.6.12:
2.6.12 didn't have kexec (unless it's a -mm kernel) So how could you boot using kexec then?
Is kexec supposed to be transparent to all the subsystems, or does ALSA have to know how to stop all DMA in order for kexec to work?
It is fairly transparent. device_shutdown on reboot should stop DMA but that is not kexec specific. kexec may be the only way the code path is easily tested.
The basic requirement from the kexec side is that the drivers be able to bring back the device from the state they left it on reboot.
So in essence it is transparent. But if your driver is not robust you can have problems.
The fact the new kernel was coming up indicates that kexec worked but the driver did not successfully initialize, the hardware from the state it placed it in during shutdown.
Eric
Quoted 5 lines · Ralf Hildebrandt
kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot but it is indepedent of the system firmware. And like a reboot you can start any kernel with it, not just Linux.
Quoted 7 lines
The name comes from the similiarity to the exec system call.
It is an ongoing process to be certain the hardware in a machine is properly shutdown, so do not be surprised if this code does not initially work for you. It may help to enable device hotplugging support. As of this writing the exact hardware interface is strongly in flux, so no good recommendation can be made.
Hmm. It looks like the text in Kconfig needs to be updated. I don't think that description has been updated in several years.
Eric
* Ralf Hildebrandt <[email protected]>:
Quoted 11 lines
* Ralf Hildebrandt <[email protected]>:
Quoted 2 lines
The one message strinking me as odd during the boot-process is:
Jul 21 19:50:01 kasbah kernel: AC'97 warm reset still in progress? [0xffffffff]More details: If I unload the sounddriver:
# rmmod snd_intel8x0and the reload it:
Quoted 8 lines
# modprobe snd_intel8x0I get:
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LACI] -> GSI 22 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:06.0 to 64
AC'97 warm reset still in progress? [0xffffffff]
Intel ICH: probe of 0000:00:06.0 failed with error -5
Fixed with 2.6.3-git3