printk-format, magic-init
PATCH 1/1 printk-format, magic-init
Hi Jim,
Quoted 1 line
1st is self-explanatory.
And obviously correct, but it happens that I already have a patch pending solving 5 more of this type of error in 4 different drivers:
Note that since 2.6.13-rc3, hardware monitoring drivers are in drivers/hwmon and no more in drivers/i2c/chips. Thus I'd invite you to send any future patch at least based on 2.6.13-rc3.
Quoted 1 line
2nd adds some missing parts of the magic init sequence.
The missing part is thiner than you seem to think, and is additionally missing on purpose. You seem to have missed the fact that:
pc87360_write_value(data, LD_TEMP, 0xF, 0xA, 0x08);
actually writes *two* bytes, one at 0x9 and one at 0xA. And the 0x00 write to 0x08 I voluntarily omitted, because it would force the chip to use an internal vref, while the system manufacturer may provide an external one instead. Instead, my code carefully forces *only* bit 0 to 0 so as to start monitoring if needs be.
Of course, if anyone ever proves that restoring the missing write helps in any way, I'll reconsider.
Quoted 5 lines
Incidentally, the reason I got into this that, despite the fact that Ive got an 'ignore fan2' in my config, Im getting this error:
prog/sensors/chips.c: printf("ERROR: Can't get FAN2 data!\n");
Fixed in CVS:
revision 1.158
date: 2005/04/22 18:08:06; author: khali; state: Exp; lines: +1 -2 (Khali) No error on missing pc87360 fan2, as this can happen with the Linux 2.6 version of the driver. Reported by Christian Schwamborn.
The fix is in the "sensors" program, file chips.c.
Quoted 4 lines
fwiw, my soekris board has no fans, so I think the module-code detects that lack via
extra_isa, and sets fannr = 0, so never creates the sysfs files. The lib code apparently doesnt handle a missing sysfs node well.
Yes, your analysis is correct. libsensors was written for the old procfs interface which always created files even when the features were missing, and was hacked later for sysfs, just enough to make it work for most cases. We know that not all corner cases are handled, we currently hack the "sensors" program to hide most errors, until the library is rewritten from scratch with the sysfs interface in mind.
Signature · 1 line
Jean Delvare