Skip to contentSkip to conversation

Remove another fixed address constraint

PPC64 David Gibson 2 participants 5 messages Jul 25, 2005 – Aug 1, 2005

lore
Share & tools
lore
#0 lore raw

Presently the LparMap, one of the structures the kernel shares with the legacy iSeries hypervisor has a fixed offset address in head.S. This patch changes this so the LparMap is a normally initialized structure, without fixed address. This allows us to use macros to compute some of the values in the structure, which wasn't previously possible because the assembler always uses signed-% which gets the wrong answers for the computations in question.

Unfortunately, a gcc bug means that doing this requires another structure (hvReleaseData) to be initialized in asm instead of C, but on the whole the result is cleaner than before.

include/asm-ppc64/iSeries/LparMap.h +15 -8
Index: working-2.6/include/asm-ppc64/iSeries/LparMap.h
===================================================================
@@ -49,19 +49,26 @@
  * entry to map the Esid to the Vsid.
 */
 
+#define HvEsidsToMap	2
+#define HvRangesToMap	1
+
 /* Hypervisor initially maps 32MB of the load area */
 #define HvPagesToMap	8192
 
 struct LparMap {
-	u64	xNumberEsids;	// Number of ESID/VSID pairs (1)
-	u64	xNumberRanges;	// Number of VA ranges to map (1)
-	u64	xSegmentTableOffs; // Page number within load area of seg table (0)
+	u64	xNumberEsids;	// Number of ESID/VSID pairs
+	u64	xNumberRanges;	// Number of VA ranges to map
+	u64	xSegmentTableOffs; // Page number within load area of seg table
 	u64	xRsvd[5];
-	u64	xKernelEsid;	// Esid used to map kernel load (0x0C00000000)
-	u64	xKernelVsid;	// Vsid used to map kernel load (0x0C00000000)
-	u64	xPages;		// Number of pages to be mapped	(8192)
-	u64	xOffset;	// Offset from start of load area (0)
-	u64	xVPN;		// Virtual Page Number (0x000C000000000000)
+	struct {
+		u64	xKernelEsid;	// Esid used to map kernel load
+		u64	xKernelVsid;	// Vsid used to map kernel load
+	} xEsids[HvEsidsToMap];
+	struct {
+		u64	xPages;		// Number of pages to be mapped
+		u64	xOffset;	// Offset from start of load area
+		u64	xVPN;		// Virtual Page Number
+	} xRanges[HvRangesToMap];
 };
 
 extern struct LparMap		xLparMap;
include/asm-ppc64/iSeries/HvReleaseData.h +6 -5
Index: working-2.6/include/asm-ppc64/iSeries/HvReleaseData.h
===================================================================
@@ -39,6 +39,11 @@
  * know that this PLIC does not support running an OS "that old".
  */
 
+#define	HVREL_TAGSINACTIVE	0x8000
+#define HVREL_32BIT		0x4000
+#define HVREL_NOSHAREDPROCS	0x2000
+#define HVREL_NOHMT		0x1000
+
 struct HvReleaseData {
 	u32	xDesc;		/* Descriptor "HvRD" ebcdic	x00-x03 */
 	u16	xSize;		/* Size of this control block	x04-x05 */
@@ -46,11 +51,7 @@
 	struct  naca_struct	*xSlicNacaAddr; /* Virt addr of SLIC NACA x08-x0F */
 	u32	xMsNucDataOffset; /* Offset of Linux Mapping Data x10-x13 */
 	u32	xRsvd1;		/* Reserved			x14-x17 */
-	u16	xTagsMode:1;	/* 0 == tags active, 1 == tags inactive */
-	u16	xAddressSize:1;	/* 0 == 64-bit, 1 == 32-bit */
-	u16	xNoSharedProcs:1; /* 0 == shared procs, 1 == no shared */
-	u16	xNoHMT:1;	/* 0 == allow HMT, 1 == no HMT */
-	u16	xRsvd2:12;	/* Reserved			x18-x19 */
+	u16	xFlags;
 	u16	xVrmIndex;	/* VRM Index of OS image	x1A-x1B */
 	u16	xMinSupportedPlicVrmIndex; /* Min PLIC level  (soft) x1C-x1D */
 	u16	xMinCompatablePlicVrmIndex; /* Min PLIC levelP (hard) x1E-x1F */
arch/ppc64/kernel/LparData.c +82 -6

105 lines not on this page · raw message

include/asm-ppc64/mmu.h +3 -0
Index: working-2.6/include/asm-ppc64/mmu.h
===================================================================
@@ -338,6 +338,9 @@
 			     | (ea >> SID_SHIFT));
 }
 
+#define VSID_SCRAMBLE(pvsid)	(((pvsid) * VSID_MULTIPLIER) % VSID_MODULUS)
+#define KERNEL_VSID(ea)		VSID_SCRAMBLE(GET_ESID(ea))
+
 #endif /* __ASSEMBLY */
 
 #endif /* _PPC64_MMU_H_ */
arch/ppc64/kernel/head.S +3 -30
Index: working-2.6/arch/ppc64/kernel/head.S
===================================================================
@@ -522,36 +522,9 @@
 #ifdef CONFIG_PPC_ISERIES
 	.globl naca
 naca:
-	.llong itVpdAreas
-
-	/*
-	 * The iSeries LPAR map is at this fixed address
-	 * so that the HvReleaseData structure can address
-	 * it with a 32-bit offset.
-	 *
-	 * The VSID values below are dependent on the
-	 * VSID generation algorithm.  See include/asm/mmu_context.h.
-	 */
-
-	. = 0x4800
-
-	.llong	2		/* # ESIDs to be mapped by hypervisor	 */
-	.llong	1		/* # memory ranges to be mapped by hypervisor */
-	.llong	STAB0_PAGE	/* Page # of segment table within load area	*/
-	.llong	0		/* Reserved */
-	.llong	0		/* Reserved */
-	.llong	0		/* Reserved */
-	.llong	0		/* Reserved */
-	.llong	0		/* Reserved */
-	.llong	(KERNELBASE>>SID_SHIFT)
-	.llong	0x408f92c94	/* KERNELBASE VSID */
-	/* We have to list the bolted VMALLOC segment here, too, so that it
-	 * will be restored on shared processor switch */
-	.llong	(VMALLOCBASE>>SID_SHIFT)
-	.llong	0xf09b89af5	/* VMALLOCBASE VSID */
-	.llong	8192		/* # pages to map (32 MB) */
-	.llong	0		/* Offset from start of loadarea to start of map */
-	.llong	0x408f92c940000	/* VPN of first page to map */
+	.llong	itVpdAreas
+	.llong	0		/* xRamDisk */
+	.llong	0		/* xRamDiskSize */
 
 	. = 0x6100
 
Signature · 4 lines
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/people/dgibson
#1 lore raw
Quoted 11 lines · David Gibson

Presently the LparMap, one of the structures the kernel shares with the legacy iSeries hypervisor has a fixed offset address in head.S. This patch changes this so the LparMap is a normally initialized structure, without fixed address. This allows us to use macros to compute some of the values in the structure, which wasn't previously possible because the assembler always uses signed-% which gets the wrong answers for the computations in question.

Unfortunately, a gcc bug means that doing this requires another structure (hvReleaseData) to be initialized in asm instead of C, but on the whole the result is cleaner than before.

I think this change caused this compile error in rc4:

{standard input}: Assembler messages:
{standard input}:254: Error: value of 4000000000002080 too large for field of 4 bytes at 0000000000002108 make[1]: *** [arch/ppc64/kernel/LparData.o] Error 1

binutils-2.16.91.0.2
gcc-4.0.2_20050727

#2 lore raw
Quoted 14 lines · Olaf Hering
Quoted 11 lines · David Gibson

Presently the LparMap, one of the structures the kernel shares with the legacy iSeries hypervisor has a fixed offset address in head.S. This patch changes this so the LparMap is a normally initialized structure, without fixed address. This allows us to use macros to compute some of the values in the structure, which wasn't previously possible because the assembler always uses signed-% which gets the wrong answers for the computations in question.

Unfortunately, a gcc bug means that doing this requires another structure (hvReleaseData) to be initialized in asm instead of C, but on the whole the result is cleaner than before.

Quoted 8 lines

I think this change caused this compile error in rc4:

{standard input}: Assembler messages:
{standard input}:254: Error: value of 4000000000002080 too large for field of 4 bytes at 0000000000002108 make[1]: *** [arch/ppc64/kernel/LparData.o] Error 1

binutils-2.16.91.0.2
gcc-4.0.2_20050727

Hrm.. definitely works here. Is this with any other patches? Can you send the .s file? That might help be debug it.

Signature · 4 lines
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/people/dgibson
#3 lore raw
Quoted 2 lines · David Gibson

Hrm.. definitely works here. Is this with any other patches? Can you send the .s file? That might help be debug it.

It works with SLES9 gcc3, only gcc4 (or recent binutils) do not like it.

#4 lore raw
Quoted 7 lines · Olaf Hering
Quoted 2 lines · David Gibson

Hrm.. definitely works here. Is this with any other patches? Can you send the .s file? That might help be debug it.

It works with SLES9 gcc3, only gcc4 (or recent binutils) do not like it.

gcc4 can't be the problem; that's an assembler error. I am using:

sneetch:~/kernel$ powerpc64-linux-as --version
GNU assembler 2.15.94 20041116
Copyright 2002 Free Software Foundation, Inc.
This program is free software; you may redistribute it under the terms
of
the GNU General Public License.  This program has absolutely no
warranty.
This assembler was configured for a target of `powerpc-linux'.
Signature · 4 lines
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/people/dgibson