2.6VMM, uClinux, & Comedi
I managed to successfully cross-compile Comedi for the Coldfire uClinux 2.6, however it has several unresolved symbols when I try to load it.
comedi: Unknown symbol pgd_offset_k
comedi: Unknown symbol pmd_none
comedi: Unknown symbol remap_page_range
comedi: Unknown symbol pte_present
comedi: Unknown symbol pte_offset_kernel
comedi: Unknown symbol VMALLOC_VMADDR
comedi: Unknown symbol pte_page
Apparently uClinux isn't implementing these paged memory functions,which kind of makes sense, but I'm a little fuzzy on what the nommu code is supposed to be doing exactly, and I couldn't find any documentation on what these functions are doing in the vanilla 2.6 kernel.
Has anyone else been down this road before?
I found Mel Gorman's Thesis on the 2.4 mm functions, but I couldn't find most of these symbols in it.
It's looking like the 2.6 mm stuff is still pretty undocumented, any links to documentation (or short text explanations)would be appreciated.
thx.
NZG.
Looks quite promising. I would like to run comedi on a blackfin stamp. Please keep me in the loop.
/Bernd
www: http://www.berndporr.me.uk/
http://www.linux-usb-daq.co.uk/ Mobile: +44 (0)7840 340069 Work: +44 (0)141 330 5237
University of Glasgow
Department of Electronics & Electrical Engineering Room 519, Rankine Building, Oakfield Avenue, Glasgow, G12 8LT
Quoted 24 lines · NZG
I managed to successfully cross-compile Comedi for the Coldfire uClinux 2.6, however it has several unresolved symbols when I try to load it.
comedi: Unknown symbol
pgd_offset_k
comedi: Unknown symbolpmd_none
comedi: Unknown symbolremap_page_range
comedi: Unknown symbolpte_present
comedi: Unknown symbolpte_offset_kernel
comedi: Unknown symbolVMALLOC_VMADDR
comedi: Unknown symbolpte_pageApparently uClinux isn't implementing these paged memory functions,which
kind of makes sense, but I'm a little fuzzy on what the nommu code is
supposed to be doing exactly, and I couldn't find any documentation on what these functions are doing in the vanilla 2.6 kernel. Has anyone else been down this road before?
I found Mel Gorman's Thesis on the 2.4 mm functions, but I couldn't find most of these symbols in it.
It's looking like the 2.6 mm stuff is still pretty undocumented, any links to documentation (or short text explanations)would be appreciated.thx.
NZG._______________________________________________
comedi mailing list
[email protected]
https://cvs.comedi.org/cgi-bin/mailman/listinfo/comedi
Quoted 9 lines · NZG
I managed to successfully cross-compile Comedi for the Coldfire uClinux 2.6, however it has several unresolved symbols when I try to load it.
comedi: Unknown symbol
pgd_offset_k
comedi: Unknown symbolpmd_none
comedi: Unknown symbolremap_page_range
comedi: Unknown symbolpte_present
comedi: Unknown symbolpte_offset_kernel
comedi: Unknown symbolVMALLOC_VMADDR
comedi: Unknown symbolpte_page
It's probably coming to grief in Comedi's Linux compatibility headers somewhere, but as this stuff has changed a few times, which version of Comedi and which kernel version are you using exactly?
Signature · 2 lines
-=( Ian Abbott @ MEV Ltd. E-mail: <[email protected]> )=- -=( Tel: +44 (0)161 477 1898 FAX: +44 (0)161 718 3587 )=-
I'm running comedi-0.7.70, but the issue is seems be be coming from the fact that I'm using a nommu arch.
grepping through my arch and include/asm, these symbols are indeed not defined.
This makes sense because uClinux has no true virtual memory, vmalloc is just a wrapper for kmalloc.
The implementation of these functions is probably trivial, but It's taking me a bit since I didn't really understand the VM code before (now I have a small inkling)
I'll get there, I'm just surprised this hasn't been attempted before.
NZG.
Quoted 15 lines · Ian Abbott
Quoted 10 lines · NZG
I managed to successfully cross-compile Comedi for the Coldfire uClinux 2.6, however it has several unresolved symbols when I try to load it.
comedi: Unknown symbol
pgd_offset_k
comedi: Unknown symbolpmd_none
comedi: Unknown symbolremap_page_range
comedi: Unknown symbolpte_present
comedi: Unknown symbolpte_offset_kernel
comedi: Unknown symbolVMALLOC_VMADDR
comedi: Unknown symbolpte_pageIt's probably coming to grief in Comedi's Linux compatibility headers somewhere, but as this stuff has changed a few times, which version of Comedi and which kernel version are you using exactly?
Quoted 15 lines · NZG
Quoted 13 lines · Ian Abbott
Quoted 10 lines · NZG
I managed to successfully cross-compile Comedi for the Coldfire uClinux 2.6, however it has several unresolved symbols when I try to load it.
comedi: Unknown symbol
pgd_offset_k
comedi: Unknown symbolpmd_none
comedi: Unknown symbolremap_page_range
comedi: Unknown symbolpte_present
comedi: Unknown symbolpte_offset_kernel
comedi: Unknown symbolVMALLOC_VMADDR
comedi: Unknown symbolpte_page
Quoted 5 lines
Quoted 3 lines
It's probably coming to grief in Comedi's Linux compatibility headers somewhere, but as this stuff has changed a few times, which version of Comedi and which kernel version are you using exactly?
I'm running comedi-0.7.70, but the issue is seems be be coming from the fact that I'm using a nommu arch.
You didn't say what kernel version you were using, but it appears to be 2.6.9 or less. Maybe some of the portability issues have been resolved in 2.6.12-uc (though probably not all of them).
Quoted 1 line
The implementation of these functions is probably trivial, but It's taking me a bit since I didn't really understand the VM code before (now I have a small inkling)
The uClinux folks could probably help you there.
Quoted 1 line
I'll get there, I'm just surprised this hasn't been attempted before.
So you're a pioneer! Good luck!
Signature · 2 lines
-=( Ian Abbott @ MEV Ltd. E-mail: <[email protected]> )=- -=( Tel: +44 (0)161 477 1898 FAX: +44 (0)161 718 3587 )=-