ide-cd: cmd 0x28 timed out
I have Samsung dvd-rom and Via chipset (Apollo Pro 133A):
hdc: SAMSUNG DVD-ROM SD-608, ATAPI CD/DVD-ROM drive
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:pioComputer boots okey, and 'hdparm' shows that DMA is enabled on 'hdc' But, when I try to play DVD using 'xine', I get into infinite loop, with error messages
/var/log/syslog:
hdc: irq timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hdc: ATAPI reset complete
end_request: I/O error, dev hdc, sector 299056 Buffer I/O error on device hdc, logical block 37382
/var/log/messages:
ide-cd: cmd 0x28 timed out
which repeat every minute.
Has anyone encountered this before, and solved it? A DVD drive without DMA is pretty useless. :-(
Signature · 5 lines
William Park <[email protected]>, Toronto, Canada ThinFlash: Linux thin-client on USB key (flash) drive http://home.eol.ca/~parkw/thinflash.html BashDiff: Super Bash shell http://freshmeat.net/projects/bashdiff/