Skip to contentSkip to conversation

Dual 2.8ghz xeon, software raid, lvm, jfs

DISCUSSION Phil Dier 2 participants 3 messages Aug 9, 2005 – Aug 10, 2005

lore
Share & tools
lore

Phil Dier

author
#0 lore raw

Hi,

I have 2 identical dual 2.8ghz xeon machines with 4gb ram, using software raid 10 with lvm layered on top, formatted with JFS (though at this point any filesystem with online resizing support will do). I have the boxes stable using 2.6.10, and they pass my stress test. I was trying to update to 2.6.12 so I can use the new ionice utility, but I'm experiencing oopses again. Can someone take a look at my info and give me an idea of what is causing my problems. I'm willing to test patches if anyone cares to work with me on a fix. All the details can be found here:

http://www.icglink.com/cluster-debug-2.6.12.3.html

Please CC me on replies, as I am not subscribed to l-k.

Thanks for your help.

Signature · 3 lines
Phil Dier (ICGLink.com -- 615 370-1530 x733)

/* vim:set noai nocindent ts=8 sw=8: */
#1 lore raw
Quoted 12 lines · Phil Dier

Hi,

I have 2 identical dual 2.8ghz xeon machines with 4gb ram, using software raid 10 with lvm layered on top, formatted with JFS (though at this point any filesystem with online resizing support will do). I have the boxes stable using 2.6.10, and they pass my stress test. I was trying to update to 2.6.12 so I can use the new ionice utility, but I'm experiencing oopses again. Can someone take a look at my info and give me an idea of what is causing my problems. I'm willing to test patches if anyone cares to work with me on a fix. All the details can be found here:

Quoted 5 lines

http://www.icglink.com/cluster-debug-2.6.12.3.html

Please CC me on replies, as I am not subscribed to l-k.

Thanks for your help.

Generally on lkml, you want to post at least the output of an oops or panic into your post.

Now, try running 2.6.13-rc6 and see if it fixes your problem, IIRC there have been a number of changes to the MPT driver between those two kernel versions.

Sonny

author
#2 lore raw
Quoted 3 lines · On Tue, 9 Aug 2005 19:05:30 -0400 Sonny Rao <[email protected]> wrote:

Generally on lkml, you want to post at least the output of an oops or panic into your post.

Okay, I'll keep this in mind for future posts. Thanks.

Quoted 3 lines

Now, try running 2.6.13-rc6 and see if it fixes your problem, IIRC there have been a number of changes to the MPT driver between those two kernel versions.

Thanks for the suggestion. I'll give it a try and see if it passes the test.

Signature · 3 lines
Phil Dier (ICGLink.com -- 615 370-1530 x733)

/* vim:set noai nocindent ts=8 sw=8: */