Skip to contentSkip to conversation

Dysfonctionnement driver carte son

DISCUSSION André Mouhot 1 participant 1 message Aug 27, 2005

lore
Share & tools
lore
#0 lore raw

Bonjour,
Comme proposé en log de ma machine Linux, je vous fais suivre cette notification de dysfonctionnement.

Computer; HP Vectra VE 400Mhz

Un débutant sous Linux, expert poste de travail Windows, responsable conception et développement des applications d'installation de postes (70 000 PC et serveurs dans un grand groupe automobiles)

Cordialement

André Mouhot

ERROR: snd-cs46xx: never read ISV3 & ISV4 from AC'97
Try reloading the ALSA driver, if you find something broken or not working on your soundcard upon
this message please report to [email protected]

Signature · 182 lines
Linux version 2.6.8-2-386 ([email protected]) (gcc version 
3.3.5 (Debian 1:3.3.5-12)) #1 Thu May 19 17:40:50 JST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000013ff0000 (usable)
 BIOS-e820: 0000000013ff0000 - 0000000013ff3000 (ACPI NVS)
 BIOS-e820: 0000000013ff3000 - 0000000014000000 (ACPI data)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
319MB LOWMEM available.
On node 0 totalpages: 81904
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 77808 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI disabled because your bios is from 99 and too old
You can enable it with acpi=force
Built 1 zonelists
Kernel command line: root=/dev/hdd1 ro apm=on
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 401.070 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 317116k/327616k available (1336k kernel code, 9724k reserved, 732k 
data, 204k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 790.52 BogoMIPS
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0183fbff 00000000 00000000 00000000
CPU: After vendor identify, caps:  0183fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps:        0183fbff 00000000 00000000 00000040
CPU: Intel Pentium II (Deschutes) stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 400.0837 MHz.
..... host bus clock speed is 100.0209 MHz.
checking if image is initramfs...it isn't (ungzip failed); looks like an 
initrd
Freeing initrd memory: 4216k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfb250, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fbe60
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbe90, dseg 0xf0000
PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch ([email protected])
devfs: boot_options: 0x0
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
EISA: Probing bus 0 at eisa0
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4216 blocks [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 204k freed
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: WDC WD64AA, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 12594960 sectors (6448 MB) w/2048KiB Cache, CHS=13328/15/63, UDMA(33)
 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
hdc: ATAPI-CD ROM-DRIVE-52MAX, ATAPI CD/DVD-ROM drive
hdd: QUANTUM FIREBALLlct20 20, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hdd: max request size: 128KiB
hdd: 39876480 sectors (20416 MB) w/418KiB Cache, CHS=39560/16/63, UDMA(33)
 /dev/ide/host0/bus1/target1/lun0: p1 p2 < p5 >
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 843372k swap on /dev/hdd5.  Priority:-1 extents:1
EXT3 FS on hdd1, internal journal
hdc: ATAPI 52X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
input: PS2++ Logitech Wheel Mouse on isa0060/serio1
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Capability LSM initialized
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Linux agpgart interface v0.100 (c) Dave Jones
PCI: Found IRQ 10 for device 0000:00:0f.0
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:0f.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xe400. Vers LK1.1.19
PCI: Found IRQ 9 for device 0000:00:04.0
Crystal 4280/46xx + AC97 Audio, version 1.28.32, 17:47:46 May 19 2005
cs46xx: Card found at 0xe8101000 and 0xe8000000, IRQ 9
cs46xx: Unknown card (1013:6003) at 0xe8101000/0xe8000000, IRQ 9
cs46xx: create - never read ISV3 & ISV4 from AC'97
cs46xx: create - never read ISV3 & ISV4 from AC'97
cs46xx: create - never read ISV3 & ISV4 from AC'97
cs46xx: create - never read ISV3 & ISV4 from AC'97
cs46xx: create - never read ISV3 & ISV4 from AC'97
cs46xx: cs46xx_probe()- cs_hardware_init() failed, retried 5 times.
cs46xx: probe()- no device allocated
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:07.2: Intel Corp. 82371AB/EB/MB PIIX4 USB
uhci_hcd 0000:00:07.2: irq 3, io base 0000e000
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
agpgart: Detected an Intel 440BX Chipset.
agpgart: Maximum main memory to use for agp memory: 262M
agpgart: AGP aperture is 64M @ 0xe0000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
PCI: Found IRQ 9 for device 0000:00:04.0
ERROR: snd-cs46xx: never read ISV3 & ISV4 from AC'97
       Try reloading the ALSA driver, if you find something
       broken or not working on your soundcard upon
       this message please report to [email protected]
Sound Fusion CS46xx: probe of 0000:00:04.0 failed with error -5
Real Time Clock Driver v1.12
input: PC Speaker
inserting floppy driver for 2.6.8-2-386
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
NET: Registered protocol family 17
NET: Registered protocol family 5
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02cc960(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
                                                                       
André Mouhot