Skip to contentSkip to conversation

APs from the Kernel Summit run Linux

DISCUSSION Harald Welte 4 participants 6 messages Aug 30, 2005 1 message not in the archive

lore
Share & tools
lore
#1 lore raw
In reply to a message not in the archive
Quoted 4 lines · Vojtech Pavlik

Hi!

The D-Link DWL-G730AP devices from the Kernel Summit run Linux, And it's likely a GPL violation, too, since sources are nowhere to be found.

*lol*. Interestingly they must have twiddled the IP stack since when I tried an "nmap" on the device, it didn't recognize it as a Linux TCP/IP stack.

Quoted 3 lines

They're based on a Marvell Libertas AP-32 (ARM9) design, similar to the ASUS WL-530g. A bootlog from the ASUS (which has telnet enabled for some reason, and thus can be logged in) is at the end of the mail.

So you grabbed that bootlog from the ASUS device, or from the D-Link?

If it is from the ASUS, what makes you think that the D-Link runs the same OS? It is quite often the case that one chipset design has multiple operating systems ported to it (you see systems with the same broadcom or Intersil chipset, one running Linux, the other VxWorks).

Please indicate how you came to the conclusion that the D-Link really runs Linux.

Quoted 5 lines

A firmware image is available from D-Link (ftp://ftp.dlink.com/Wireless/dwlg730AP/Firmware/dwlg730ap_firmware_100.bin), and it seems to be composed of compressed blocks padded by zeroes. I haven't verified yet that it's indeed a compressed kernel, cramfs, etc, but it seems quite likely.

I'm downloading it right now, and I'll see whether I can find any Linux in there.

Quoted 2 lines

Anyone interested in dissecting it, and pushing D-Link/Marvell to release the kernel sources?

Sure, it's (unfortunately) not the first time I'm dealing with D-Link on their GPL [in]compliance :((

Quoted 1 line

I'd love to get more out of this cute device ...

If the design really is identical enough to the ASUS device, then I suggest looking into
http://dlsvr02.asus.com/pub/ASUS/wireless/WL-530g/GPL_1825.zip

Cheers,

Signature · 4 lines
- Harald Welte <[email protected]>       http://gpl-violations.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
                                                  (ETSI EN 300 175-7 Ch. A6)
#2 lore raw
Quoted 7 lines · Harald Welte
Quoted 2 lines

The D-Link DWL-G730AP devices from the Kernel Summit run Linux, And it's likely a GPL violation, too, since sources are nowhere to be found.

*lol*. Interestingly they must have twiddled the IP stack since when I tried an "nmap" on the device, it didn't recognize it as a Linux TCP/IP stack.

Quoted 5 lines
Quoted 3 lines

They're based on a Marvell Libertas AP-32 (ARM9) design, similar to the ASUS WL-530g. A bootlog from the ASUS (which has telnet enabled for some reason, and thus can be logged in) is at the end of the mail.

So you grabbed that bootlog from the ASUS device, or from the D-Link?

This is from the ASUS.

Quoted 7 lines

If it is from the ASUS, what makes you think that the D-Link runs the same OS? It is quite often the case that one chipset design has multiple operating systems ported to it (you see systems with the same broadcom or Intersil chipset, one running Linux, the other VxWorks).

Please indicate how you came to the conclusion that the D-Link really runs Linux.

The device's ESSID during boot is 'Marvell AP-32', and the Libertas AP-32 and AP-52 design toolkits contain only ports of Linux and eCos to the device, according to Marvell. Considering the device's routing capabilities I'm believe it's running Linux, but I don't have a solid proof yet, unfortunately. The eCos port is intended for the non-router variety of the design.

On the other hand, eCos seems to be GPL, too, although it's possible that the owner dual-licenses it.

Quoted 7 lines
Quoted 4 lines

A firmware image is available from D-Link
and it seems to be composed of compressed blocks padded by zeroes. I haven't verified yet that it's indeed a compressed kernel, cramfs, etc, but it seems quite likely.

I'm downloading it right now, and I'll see whether I can find any Linux in there.

Good luck. I'll try to take a look, too.

Quoted 5 lines
Quoted 2 lines

Anyone interested in dissecting it, and pushing D-Link/Marvell to release the kernel sources?

Sure, it's (unfortunately) not the first time I'm dealing with D-Link on their GPL [in]compliance :((

Rather unrelated, I'm trying to figure out what to do with Elo Touchsystems, they used my HID driver as a base of their own binary-only driver and don't answer to e-mail.

Quoted 5 lines
Quoted 1 line

I'd love to get more out of this cute device ...

If the design really is identical enough to the ASUS device, then I suggest looking into
http://dlsvr02.asus.com/pub/ASUS/wireless/WL-530g/GPL_1825.zip

I'll take a look, thanks!

Signature · 2 lines
Vojtech Pavlik
SuSE Labs, SuSE CR
#3 lore raw
Quoted 8 lines · Vojtech Pavlik
Quoted 7 lines

If it is from the ASUS, what makes you think that the D-Link runs the same OS? It is quite often the case that one chipset design has multiple operating systems ported to it (you see systems with the same broadcom or Intersil chipset, one running Linux, the other VxWorks).

Please indicate how you came to the conclusion that the D-Link really runs Linux.

Quoted 6 lines

The device's ESSID during boot is 'Marvell AP-32', and the Libertas AP-32 and AP-52 design toolkits contain only ports of Linux and eCos to the device, according to Marvell. Considering the device's routing capabilities I'm believe it's running Linux, but I don't have a solid proof yet, unfortunately. The eCos port is intended for the non-router variety of the design.

There could also be a 3rd party toolkit with a different OS that you don't know about...

Quoted 2 lines

On the other hand, eCos seems to be GPL, too, although it's possible that the owner dual-licenses it.

According to http://sources.redhat.com/ecos/, it is either still RedHat or already transferred to the FSF. That doesn't sound like dual licensing, I don't think the FSF would do that...

Quoted 9 lines
Quoted 7 lines
Quoted 4 lines

A firmware image is available from D-Link
and it seems to be composed of compressed blocks padded by zeroes. I haven't verified yet that it's indeed a compressed kernel, cramfs, etc, but it seems quite likely.

I'm downloading it right now, and I'll see whether I can find any Linux in there.

Good luck. I'll try to take a look, too.

Up to now I can only tell you that it doesn't look like any of the 50+ linux firmware images I've seen so far.

Quoted 6 lines
Quoted 2 lines

Sure, it's (unfortunately) not the first time I'm dealing with D-Link on their GPL [in]compliance :((

Rather unrelated, I'm trying to figure out what to do with Elo Touchsystems, they used my HID driver as a base of their own binary-only driver and don't answer to e-mail.

Well, if you seriously want to do something about it: They have a German subsidiary. So if the respective product can be bought through that .de office, we can do something about it here. Let's take this offline.

Signature · 4 lines
- Harald Welte <[email protected]>       http://gpl-violations.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
                                                  (ETSI EN 300 175-7 Ch. A6)
#4 lore raw
Quoted 9 lines · Harald Welte
Quoted 6 lines

The device's ESSID during boot is 'Marvell AP-32', and the Libertas AP-32 and AP-52 design toolkits contain only ports of Linux and eCos to the device, according to Marvell. Considering the device's routing capabilities I'm believe it's running Linux, but I don't have a solid proof yet, unfortunately. The eCos port is intended for the non-router variety of the design.

There could also be a 3rd party toolkit with a different OS that you don't know about...

It's definitely possible.

Quoted 6 lines
Quoted 2 lines

On the other hand, eCos seems to be GPL, too, although it's possible that the owner dual-licenses it.

According to http://sources.redhat.com/ecos/, it is either still RedHat or already transferred to the FSF. That doesn't sound like dual licensing, I don't think the FSF would do that...

That was my thinking, too.

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 4 lines

A firmware image is available from D-Link
and it seems to be composed of compressed blocks padded by zeroes. I haven't verified yet that it's indeed a compressed kernel, cramfs, etc, but it seems quite likely.

Quoted 7 lines
Quoted 4 lines
Quoted 2 lines

I'm downloading it right now, and I'll see whether I can find any Linux in there.

Good luck. I'll try to take a look, too.

Up to now I can only tell you that it doesn't look like any of the 50+ linux firmware images I've seen so far.

Too bad. Well, I'll have to try to hook up a serial port.

Signature · 2 lines
Vojtech Pavlik
SuSE Labs, SuSE CR
#5 lore raw
Quoted 5 lines
Quoted 3 lines

According to http://sources.redhat.com/ecos/, it is either still RedHat or already transferred to the FSF. That doesn't sound like dual licensing, I don't think the FSF would do that...

That was my thinking, too.

eCos at least historically had other licensing options too.

#6 lore raw
In reply to Vojtech Pavlik

I've been looking into the airlink devices (fry's house brand) and they have a marvell based AP (the one that made /. a few weeks go, sells for $17 on sale). when I contacted airlink about getting the source they replaied that current versions only run in-house developed code, no eCos or uCLinux code, even thought the Libertas AP-32 and -52 kits provide no help in running anything else.

so far nobody has been able to uncompress the firmware to prove different.

David Lang

Quoted 72 lines · Vojtech Pavlik
Quoted 7 lines · Harald Welte
Quoted 2 lines

The D-Link DWL-G730AP devices from the Kernel Summit run Linux, And it's likely a GPL violation, too, since sources are nowhere to be found.

*lol*. Interestingly they must have twiddled the IP stack since when I tried an "nmap" on the device, it didn't recognize it as a Linux TCP/IP stack.

Quoted 5 lines
Quoted 3 lines

They're based on a Marvell Libertas AP-32 (ARM9) design, similar to the ASUS WL-530g. A bootlog from the ASUS (which has telnet enabled for some reason, and thus can be logged in) is at the end of the mail.

So you grabbed that bootlog from the ASUS device, or from the D-Link?

This is from the ASUS.

Quoted 7 lines

If it is from the ASUS, what makes you think that the D-Link runs the same OS? It is quite often the case that one chipset design has multiple operating systems ported to it (you see systems with the same broadcom or Intersil chipset, one running Linux, the other VxWorks).

Please indicate how you came to the conclusion that the D-Link really runs Linux.

The device's ESSID during boot is 'Marvell AP-32', and the Libertas AP-32 and AP-52 design toolkits contain only ports of Linux and eCos to the device, according to Marvell. Considering the device's routing capabilities I'm believe it's running Linux, but I don't have a solid proof yet, unfortunately. The eCos port is intended for the non-router variety of the design.

On the other hand, eCos seems to be GPL, too, although it's possible that the owner dual-licenses it.

Quoted 7 lines
Quoted 4 lines

A firmware image is available from D-Link
and it seems to be composed of compressed blocks padded by zeroes. I haven't verified yet that it's indeed a compressed kernel, cramfs, etc, but it seems quite likely.

I'm downloading it right now, and I'll see whether I can find any Linux in there.

Good luck. I'll try to take a look, too.

Quoted 5 lines
Quoted 2 lines

Anyone interested in dissecting it, and pushing D-Link/Marvell to release the kernel sources?

Sure, it's (unfortunately) not the first time I'm dealing with D-Link on their GPL [in]compliance :((

Rather unrelated, I'm trying to figure out what to do with Elo Touchsystems, they used my HID driver as a base of their own binary-only driver and don't answer to e-mail.

Quoted 5 lines
Quoted 1 line

I'd love to get more out of this cute device ...

If the design really is identical enough to the ASUS device, then I suggest looking into
http://dlsvr02.asus.com/pub/ASUS/wireless/WL-530g/GPL_1825.zip

I'll take a look, thanks!

Signature · 7 lines
Vojtech Pavlik
SuSE Labs, SuSE CR
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
Signature · 2 lines
There are two ways of constructing a software design. One way is to make it so simple that there are obviously no deficiencies. And the other way is to make it so complicated that there are no obvious deficiencies.
 -- C.A.R. Hoare