Another 2.6.13-ck3 locks machine after some time, 2.6.12.5 work fine
I have also tried to switch to kernel 2.6.13-ck3 and after about 2 hours the machine is completely frozen. I have than applied the proposed patch from Linus for a simmilar problem on 2.6.13.1 but it didn't help.
My Machine is an Athlon64 running debian 3.1 in 64bit.
Here is the difference between the output of lspci -WX on 2.6.12.5 and from 2.6.13-ck3
manz@hardy> diff -W50 lspci-vvx-2.6.12.5 lspci-vvx-2.6.13-ck3 77c77
< Interrupt: pin A routed to IRQ 11
---
Quoted 1 line
Interrupt: pin A routed to IRQ 16
187c187
< Latency: 64, Cache Line Size: 0x10 (64 bytes)
---
Quoted 1 line
Latency: 64, Cache Line Size: 0x08 (32 bytes)
191c191
< 00: 06 11 04 31 17 00 10 02 86 20 03 0c 10 40 80 00
---
Quoted 1 line
00: 06 11 04 31 17 00 10 02 86 20 03 0c 08 40 80 00
manz@hardy> diff -U50 lspci-vvx-2.6.12.5 lspci-vvx-2.6.13-ck3
lspci-vvx-2.6.13.1-ck3 2005-09-13 17:09:16.000000000 +0200 renamed from lspci-vvx-2.6.12.5 2005-09-13 13:31:56.000000000 +0200 +0 -0
@@ -27,101 +27,101 @@ 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000:00:00.3 Host bridge: VIA Technologies, Inc.: Unknown device 3282 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00: 06 11 82 32 06 00 00 02 00 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:00.4 Host bridge: VIA Technologies, Inc.: Unknown device 4282
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00: 06 11 82 42 06 00 00 02 00 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:00.7 Host bridge: VIA Technologies, Inc.: Unknown device 7282
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00: 06 11 82 72 06 00 00 02 00 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800
South] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: faf00000-fbffffff
Prefetchable memory behind bridge: e0000000-f9ffffff
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: <available only to root>
00: 06 11 88 b1 07 01 30 02 00 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 20 22
20: f0 fa f0 fb 00 e0 f0 f9 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 0a 00
0000:00:09.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus
Reference Card (rev 01)
Subsystem: Asustek Computer, Inc.: Unknown device 130f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 0x08 (32 bytes)
- Interrupt: pin A routed to IRQ 11
+ Interrupt: pin A routed to IRQ 16
Region 0: Memory at faa00000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <available only to root>
00: 14 18 01 02 17 01 10 04 01 00 80 02 08 40 00 00
10: 00 00 a0 fa 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 01 06 00 00 43 10 0f 13
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00
0000:00:0a.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Gigabit
Ethernet 10/100/1000Base-T Adapter (rev 13)
Subsystem: Asustek Computer, Inc.: Unknown device 811a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fac00000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at b000 [size=256]
Expansion ROM at fab00000 [disabled] [size=128K]
Capabilities: <available only to root>00: ab 11 20 43 17 01 b0 02 13 00 00 02 08 40 00 00 10: 00 00 c0 fa 01 b0 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 1a 81 30: 00 00 b0 fa 48 00 00 00 00 00 00 00 0a 01 17 1f
0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID
Controller (rev 80)
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin B routed to IRQ 20
Region 0: I/O ports at d000 [size=8]
Region 1: I/O ports at c800 [size=4]
Region 2: I/O ports at c400 [size=8]
Region 3: I/O ports at c000 [size=4]
Region 4: I/O ports at b800 [size=16]
Region 5: I/O ports at b400 [size=256]
Capabilities: <available only to root>00: 06 11 49 31 07 00 90 02 80 00 04 01 00 40 80 00 10: 01 d0 00 00 01 c8 00 00 01 c4 00 00 01 c0 00 00 20: 01 b8 00 00 01 b4 00 00 00 00 00 00 43 10 ed 80 30: 00 00 00 00 c0 00 00 00 00 00 00 00 04 02 00 00
0000:00:0f.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at fc00 [size=16]
Capabilities: <available only to root>
00: 06 11 71 05 07 00 90 02 06 8a 01 01 00 20 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
@@ -137,105 +137,105 @@
Region 4: I/O ports at d400 [size=32]
Capabilities: <available only to root>
00: 06 11 38 30 17 00 10 02 81 00 03 0c 08 40 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 d4 00 00 00 00 00 00 00 00 00 00 43 10 ed 80
30: 00 00 00 00 80 00 00 00 00 00 00 00 05 01 00 00
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at d800 [size=32]
Capabilities: <available only to root>
00: 06 11 38 30 17 00 10 02 81 00 03 0c 08 40 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 d8 00 00 00 00 00 00 00 00 00 00 43 10 ed 80
30: 00 00 00 00 80 00 00 00 00 00 00 00 05 01 00 00
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at e000 [size=32]
Capabilities: <available only to root>
00: 06 11 38 30 17 00 10 02 81 00 03 0c 08 40 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e0 00 00 00 00 00 00 00 00 00 00 43 10 ed 80
30: 00 00 00 00 80 00 00 00 00 00 00 00 05 02 00 00
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at e400 [size=32]
Capabilities: <available only to root>
00: 06 11 38 30 17 00 10 02 81 00 03 0c 08 40 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e4 00 00 00 00 00 00 00 00 00 00 43 10 ed 80
30: 00 00 00 00 80 00 00 00 00 00 00 00 05 02 00 00
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if
20 [EHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
- Latency: 64, Cache Line Size: 0x10 (64 bytes)
+ Latency: 64, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin C routed to IRQ 21
Region 0: Memory at fae00000 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
-00: 06 11 04 31 17 00 10 02 86 20 03 0c 10 40 80 00
+00: 06 11 04 31 17 00 10 02 86 20 03 0c 08 40 80 00
10: 00 00 e0 fa 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ed 80
30: 00 00 00 00 80 00 00 00 00 00 00 00 05 03 00 00
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [K8T800
South]
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <available only to root>
00: 06 11 27 32 87 00 10 02 00 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ed 80
30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
Subsystem: Asustek Computer, Inc.: Unknown device 812a
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 22
Region 0: I/O ports at e800 [size=256]
Capabilities: <available only to root>
00: 06 11 59 30 01 00 10 02 60 00 01 04 00 00 00 00
10: 01 e8 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 2a 81
30: 00 00 00 00 c0 00 00 00 00 00 00 00 06 03 00 00
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Capabilities: <available only to root>
00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
manz@hardy>
Signature · 7 lines
----------------------------------------------------------------------------- Hartmut Manz WWW: http://www.intes.de INTES GmbH Phone: +49-711-78499-29 Schulze-Delitzsch-Str. 16 Fax: +49-711-78499-10 D-70565 Stuttgart E-mail: [email protected] Himmel und Erde werden vergehen; meine Worte aber werden nicht vergehen. ------------------------------------------------------ Markus 13,31 --------
Quoted 3 lines · Hartmut Manz
I have also tried to switch to kernel 2.6.13-ck3 and after about 2 hours the machine is completely frozen. I have than applied the proposed patch from Linus for a simmilar problem on 2.6.13.1 but it didn't help.
-ck currently has a unique problem with 250HZ as well. Try 1000 if you are using 250.
Cheers,
Con
Quoted 8 lines · Con Kolivas
Quoted 3 lines · Hartmut Manz
I have also tried to switch to kernel 2.6.13-ck3 and after about 2 hours the machine is completely frozen. I have than applied the proposed patch from Linus for a simmilar problem on 2.6.13.1 but it didn't help.
-ck currently has a unique problem with 250HZ as well. Try 1000 if you are using 250.
Yes I was using 250 HZ.
So I will recompile the Kernel now and come back with an answer later
Thank You
Hartmut
Quoted 2 lines
Cheers,
Con
Signature · 7 lines
----------------------------------------------------------------------------- Hartmut Manz WWW: http://www.intes.de INTES GmbH Phone: +49-711-78499-29 Schulze-Delitzsch-Str. 16 Fax: +49-711-78499-10 D-70565 Stuttgart E-mail: [email protected] Himmel und Erde werden vergehen; meine Worte aber werden nicht vergehen. ------------------------------------------------------ Markus 13,31 --------
Quoted 8 lines · Con Kolivas
Quoted 3 lines · Hartmut Manz
I have also tried to switch to kernel 2.6.13-ck3 and after about 2 hours the machine is completely frozen. I have than applied the proposed patch from Linus for a simmilar problem on 2.6.13.1 but it didn't help.
-ck currently has a unique problem with 250HZ as well. Try 1000 if you are using 250.
My machine is still running, so the problem was 250 HZ and is solved now.
Thank You
Hartmut
Quoted 2 lines
Cheers,
Con
Signature · 7 lines
----------------------------------------------------------------------------- Hartmut Manz WWW: http://www.intes.de INTES GmbH Phone: +49-711-78499-29 Schulze-Delitzsch-Str. 16 Fax: +49-711-78499-10 D-70565 Stuttgart E-mail: [email protected] Himmel und Erde werden vergehen; meine Worte aber werden nicht vergehen. ------------------------------------------------------ Markus 13,31 --------