-stable review
Subsystems (10)
PATCH 7/11 : Fix DHCP + MASQUERADE problem
In reply to Chris Wright-stable review patch. If anyone has any objections, please let us know.
------------------
In 2.6.13-rcX the MASQUERADE target was changed not to exclude local packets for better source address consistency. This breaks DHCP clients using UDP sockets when the DHCP requests are caught by a MASQUERADE rule because the MASQUERADE target drops packets when no address is configured on the outgoing interface. This patch makes it ignore packets with a source address of 0.
Thanks to Rusty for this suggestion.
--- net/ipv4/netfilter/ipt_MASQUERADE.c | 6 ++++++ 1 files changed, 6 insertions(+)
net/ipv4/netfilter/ipt_MASQUERADE.c +6 -0
@@ -95,6 +95,12 @@ masquerade_target(struct sk_buff **pskb,IP_NF_ASSERT (ct && (ctinfo ==IP_CT_NEW || ctinfo ==IP_CT_RELATED || ctinfo ==IP_CT_RELATED +IP_CT_IS_REPLY )); +/* Source address is 0.0.0.0 - locally generated packet that is +* probably not supposed to be masqueraded. +*/ +if (ct->tuplehash[IP_CT_DIR_ORIGINAL ].tuple.src.ip ==0 ) +return NF_ACCEPT ; + mr = targinfo; rt = (struct rtable *)(*pskb)->dst; newsrc =inet_select_addr (out, rt->rt_gateway,RT_SCOPE_UNIVERSE );
--
cover -stable review
This is the start of the stable review cycle for the 2.6.13.2 release. There are 11 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let us know. If anyone is a maintainer of the proper subsystem, and wants to add a signed-off-by: line to the patch, please respond with it.
These patches are sent out with a number of different people on the
Cc: line. If you wish to be a reviewer, please email [email protected] to add your name to the list. If you want to be off the reviewer list, also email us.
Responses should be made by Sat Sep 17 01:00 2005 UTC. Anything received after that time, might be too late.
thanks,
the -stable release team
--
PATCH 4/11 hpt366: write the full 4 bytes of ROM address, not just low 1 byte
-stable review patch. If anyone has any objections, please let us know.
------------------
This is one heck of a confused driver. It uses a byte write to a dword register to enable a ROM resource that it doesn't even seem to be using.
"Lost and wandering in the desert of confusion"
--- drivers/ide/pci/hpt366.c | 8 ++++++-- 1 files changed, 6 insertions(+), 2 deletions(-)
drivers/ide/pci/hpt366.c +6 -2
@@ -1334,9 +1334,13 @@ static int __devinit init_hpt366(structstatic unsigned int __devinit init_chipset_hpt366 (struct pci_dev *dev,const char *name) {int ret =0 ; -/* FIXME: Not portable */ + +/* +* FIXME: Not portable. Also, why do we enable the ROM in the first place? +* We don't seem to be using it. +*/ if (dev->resource[PCI_ROM_RESOURCE ].start) -pci_write_config_byte (dev,PCI_ROM_ADDRESS , +pci_write_config_dword (dev,PCI_ROM_ADDRESS , dev->resource[PCI_ROM_RESOURCE ].start |PCI_ROM_ADDRESS_ENABLE );pci_write_config_byte (dev,PCI_CACHE_LINE_SIZE , (L1_CACHE_BYTES /4 ));
--
PATCH 8/11 jfs: jfs_delete_inode must call clear_inode
In reply to Chris Wright-stable review patch. If anyone has any objections, please let us know.
------------------
Quoted 1 line
From Chuck Ebbert:
I'm submitting this patch for -stable:
- it reportedly fixes an oops
- it's already in 2.6.13-git
JFS: jfs_delete_inode should always call clear_inode.
--- fs/jfs/inode.c | 24 ++++++++++++------------ 1 files changed, 12 insertions(+), 12 deletions(-)
fs/jfs/inode.c +12 -12
@@ -128,21 +128,21 @@ void jfs_delete_inode(struct inode *inod {jfs_info ("In jfs_delete_inode, inode = 0x%p" , inode); -if (is_bad_inode (inode) || - (JFS_IP (inode)->fileset !=cpu_to_le32 (FILESYSTEM_I ))) -return ; +if (!is_bad_inode (inode) && + (JFS_IP (inode)->fileset ==cpu_to_le32 (FILESYSTEM_I ))) { -if (test_cflag (COMMIT_Freewmap, inode)) -jfs_free_zero_link (inode); +if (test_cflag (COMMIT_Freewmap, inode)) +jfs_free_zero_link (inode); -diFree (inode); +diFree (inode); -/* -* Free the inode from the quota allocation. -*/ -DQUOT_INIT (inode); -DQUOT_FREE_INODE (inode); -DQUOT_DROP (inode); +/* +* Free the inode from the quota allocation. +*/ +DQUOT_INIT (inode); +DQUOT_FREE_INODE (inode); +DQUOT_DROP (inode); + }clear_inode (inode); }
--
PATCH 3/3 Sun HME: enable and map PCI ROM properly
In reply to Chris Wright-stable review patch. If anyone has any objections, please let us know.
------------------
This ports the Sun GEM ROM mapping/enable fixes it sunhme (which used the same PCI ROM mapping code).
Without this, I get NULL MAC addresses for all 4 ports (it's a SUN QFE). With it, I get the correct addresses (the ones printed on the label on the card).
--- drivers/net/sunhme.c | 45 ++++++++++++++++++--------------------------- 1 files changed, 18 insertions(+), 27 deletions(-)
drivers/net/sunhme.c +18 -27
@@ -2954,7 +2954,7 @@ static int is_quattro_p(struct pci_dev * }/* Fetch MAC address from vital product data of PCI ROM. */ -static void find_eth_addr_in_vpd (void __iomem *rom_base,int len,int index,unsigned char *dev_addr) +static int find_eth_addr_in_vpd (void __iomem *rom_base,int len,int index,unsigned char *dev_addr) {int this_offset;
@@ -2977,42 +2977,33 @@ static void find_eth_addr_in_vpd(void __for (i =0 ; i <6 ; i++) dev_addr[i] =readb (p + i); -break ; +return 1 ; } index--; } +return 0 ; }static void get_hme_mac_nonsparc (struct pci_dev *pdev,unsigned char *dev_addr) { -u32 rom_reg_orig; -void __iomem *p; -int index; +size_t size; +void __iomem *p =pci_map_rom (pdev, &size); - index =0 ; -if (is_quattro_p (pdev)) - index =PCI_SLOT (pdev->devfn); - -if (pdev->resource[PCI_ROM_RESOURCE ].parent ==NULL ) { -if (pci_assign_resource (pdev,PCI_ROM_RESOURCE ) <0 ) - goto use_random; +if (p) { +int index =0 ; +int found; + +if (is_quattro_p (pdev)) + index =PCI_SLOT (pdev->devfn); + + found =readb (p) ==0x55 && +readb (p +1 ) ==0xaa && +find_eth_addr_in_vpd (p, (64 *1024 ), index, dev_addr); +pci_unmap_rom (pdev, p); +if (found) +return ; } -pci_read_config_dword (pdev, pdev->rom_base_reg, &rom_reg_orig); -pci_write_config_dword (pdev, pdev->rom_base_reg, - rom_reg_orig |PCI_ROM_ADDRESS_ENABLE ); - - p =ioremap (pci_resource_start (pdev,PCI_ROM_RESOURCE ), (64 *1024 )); -if (p !=NULL &&readb (p) ==0x55 &&readb (p +1 ) ==0xaa ) -find_eth_addr_in_vpd (p, (64 *1024 ), index, dev_addr); - -if (p !=NULL ) -iounmap (p); - -pci_write_config_dword (pdev, pdev->rom_base_reg, rom_reg_orig); -return ; - -use_random:/* Sun MAC prefix then 3 random bytes. */ dev_addr[0 ] =0x08 ; dev_addr[1 ] =0x00 ;
--
PATCH 5/11 Sun GEM ethernet: enable and map PCI ROM properly
In reply to Chris Wright-stable review patch. If anyone has any objections, please let us know.
------------------
This same patch was reported to fix the MAC address detection on sunhme (next patch). Most people seem to be running this on Sparcs or PPC machines, where we get the MAC address from their respective firmware rather than from the (previously broken) ROM mapping routines.
--- drivers/net/sungem.c | 36 ++++++++++++++---------------------- 1 files changed, 14 insertions(+), 22 deletions(-)
drivers/net/sungem.c +14 -22
@@ -2816,7 +2816,7 @@ static int gem_ioctl(struct net_device *#if (!defined(__sparc__) && !defined(CONFIG_PPC_PMAC ))/* Fetch MAC address from vital product data of PCI ROM. */ -static void find_eth_addr_in_vpd (void __iomem *rom_base,int len,unsigned char *dev_addr) +static int find_eth_addr_in_vpd (void __iomem *rom_base,int len,unsigned char *dev_addr) {int this_offset;
@@ -2837,35 +2837,27 @@ static void find_eth_addr_in_vpd(void __for (i =0 ; i <6 ; i++) dev_addr[i] =readb (p + i); -break ; +return 1 ; } +return 0 ; }static void get_gem_mac_nonobp (struct pci_dev *pdev,unsigned char *dev_addr) { -u32 rom_reg_orig; -void __iomem *p; - -if (pdev->resource[PCI_ROM_RESOURCE ].parent ==NULL ) { -if (pci_assign_resource (pdev,PCI_ROM_RESOURCE ) <0 ) - goto use_random; - } - -pci_read_config_dword (pdev, pdev->rom_base_reg, &rom_reg_orig); -pci_write_config_dword (pdev, pdev->rom_base_reg, - rom_reg_orig |PCI_ROM_ADDRESS_ENABLE ); +size_t size; +void __iomem *p =pci_map_rom (pdev, &size); - p =ioremap (pci_resource_start (pdev,PCI_ROM_RESOURCE ), (64 *1024 )); -if (p !=NULL &&readb (p) ==0x55 &&readb (p +1 ) ==0xaa ) -find_eth_addr_in_vpd (p, (64 *1024 ), dev_addr); +if (p) { +int found; -if (p !=NULL ) -iounmap (p); - -pci_write_config_dword (pdev, pdev->rom_base_reg, rom_reg_orig); -return ; + found =readb (p) ==0x55 && +readb (p +1 ) ==0xaa && +find_eth_addr_in_vpd (p, (64 *1024 ), dev_addr); +pci_unmap_rom (pdev, p); +if (found) +return ; + } -use_random:/* Sun MAC prefix then 3 random bytes. */ dev_addr[0 ] =0x08 ; dev_addr[1 ] =0x00 ;
--
PATCH 9/11 Fix MPOL_F_VERIFY
In reply to Chris Wright-stable review patch. If anyone has any objections, please let us know.
------------------
There was a pretty bad bug in there that the code would always check the full VMA, not the range the user requested.
When the VMA to be checked was merged with the previous VMA this could lead to spurious failures.
--- mm/mempolicy.c | 7 ++++++- 1 files changed, 6 insertions(+), 1 deletion(-)
mm/mempolicy.c +6 -1
@@ -333,8 +333,13 @@ check_range(struct mm_struct *mm, unsignif (prev && prev->vm_end < vma->vm_start)return ERR_PTR (-EFAULT );if ((flags &MPOL_MF_STRICT ) && !is_vm_hugetlb_page (vma)) { +unsigned long endvma = vma->vm_end; +if (endvma > end) + endvma = end; +if (vma->vm_start > start) + start = vma->vm_start; err =check_pgd_range (vma->vm_mm, - vma->vm_start, vma->vm_end, nodes); + start, endvma, nodes);if (err) { first =ERR_PTR (err);break ;
--
PATCH 10/11 Fix up more strange byte writes to the PCI_ROM_ADDRESS config word
In reply to Chris Wright-stable review patch. If anyone has any objections, please let us know.
------------------
It's a dword thing, and the value we write is a dword. Doing a byte write to it is nonsensical, and writes only the low byte, which only contains the enable bit. So we enable a nonsensical address (usually zero), which causes the controller no end of problems.
Trivial fix, but nasty to find.
--- drivers/ide/pci/cmd64x.c | 2 +- drivers/ide/pci/hpt34x.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/ide/pci/cmd64x.c +1 -1
@@ -608,7 +608,7 @@ static unsigned int __devinit init_chips#ifdef __i386__if (dev->resource[PCI_ROM_RESOURCE ].start) { -pci_write_config_byte (dev,PCI_ROM_ADDRESS , dev->resource[PCI_ROM_RESOURCE ].start |PCI_ROM_ADDRESS_ENABLE ); +pci_write_config_dword (dev,PCI_ROM_ADDRESS , dev->resource[PCI_ROM_RESOURCE ].start |PCI_ROM_ADDRESS_ENABLE );printk (KERN_INFO "%s: ROM enabled at 0x%08lx\n" , name, dev->resource[PCI_ROM_RESOURCE ].start); }#endif
drivers/ide/pci/hpt34x.c +1 -1
@@ -173,7 +173,7 @@ static unsigned int __devinit init_chipsif (cmd &PCI_COMMAND_MEMORY ) {if (pci_resource_start (dev,PCI_ROM_RESOURCE )) { -pci_write_config_byte (dev,PCI_ROM_ADDRESS , +pci_write_config_dword (dev,PCI_ROM_ADDRESS , dev->resource[PCI_ROM_RESOURCE ].start |PCI_ROM_ADDRESS_ENABLE );printk (KERN_INFO "HPT345: ROM enabled at 0x%08lx\n" , dev->resource[PCI_ROM_RESOURCE ].start);
--
PATCH 11/11 USB: ftdi_sio: custom baud rate fix
In reply to Chris Wright-stable review patch. If anyone has any objections, please let us know.
------------------
ftdi_sio: I messed up the baud_base for custom baud rate support in 2.6.13. The attached one-liner patch fixes it.
--- drivers/usb/serial/ftdi_sio.c | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-)
drivers/usb/serial/ftdi_sio.c +1 -1
@@ -874,7 +874,7 @@ static void ftdi_determine_type(struct uunsigned interfaces;/* Assume it is not the original SIO device for now. */ - priv->baud_base =48000000 /16 ; + priv->baud_base =48000000 /2 ; priv->write_offset =0 ; version =le16_to_cpu (udev->descriptor.bcdDevice);
--
PATCH 1/11 lost fput in 32bit ioctl on x86-64
In reply to Chris Wright-stable review patch. If anyone has any objections, please let us know.
------------------
This patch adds lost fput in 32bit tiocgdev ioctl on x86-64
I believe this is a security issues, since user can fget() file as many times as he wants to. So file refcounter can be overlapped and first fput() will free resources though there will be still structures pointing to the file, mnt, dentry etc. Also fput() sets f_dentry and f_vfsmnt to NULL, so other file users will OOPS.
The oops can be done under files_lock and others, so this is really exploitable DoS on SMP. Didn't checked it on practice actually.
(chrisw: Update to use fget_light/fput_light)
--- arch/x86_64/ia32/ia32_ioctl.c | 17 +++++++++++++---- 1 files changed, 13 insertions(+), 4 deletions(-)
arch/x86_64/ia32/ia32_ioctl.c +13 -4
@@ -24,17 +24,26 @@static int tiocgdev (unsigned fd,unsigned cmd,unsigned int __user *ptr) { -struct file *file =fget (fd); +struct file *file;struct tty_struct *real_tty; +int fput_needed, ret; + file =fget_light (fd, &fput_needed);if (!file)return -EBADF ; + + ret = -EINVAL ;if (file->f_op->ioctl != tty_ioctl) -return -EINVAL ; + goto out; real_tty = (struct tty_struct *)file->private_data;if (!real_tty) -return -EINVAL ; -return put_user (new_encode_dev (tty_devnum (real_tty)), ptr); + goto out; + + ret =put_user (new_encode_dev (tty_devnum (real_tty)), ptr); + +out: +fput_light (file, fput_needed); +return ret; }#define RTC_IRQP_READ32 _IOR('p', 0x0b, unsigned int)/* Read IRQ rate */
--
PATCH 2/11 Lost sockfd_put() in routing_ioctl()
In reply to Chris Wright-stable review patch. If anyone has any objections, please let us know.
------------------
This patch adds lost sockfd_put() in 32bit compat rounting_ioctl() on 64bit platforms
I believe this is a security issues, since user can fget() file as many times as he wants to. So file refcounter can be overlapped and first fput() will free resources though there will be still structures pointing to the file, mnt, dentry etc.
Also fput() sets f_dentry and f_vfsmnt to NULL,
so other file users will OOPS.
The oops can be done under files_lock and others, so this can be an exploitable DoS on SMP. Didn't checked it on practice actually.
--- fs/compat_ioctl.c | 7 +++++-- 1 files changed, 5 insertions(+), 2 deletions(-)
fs/compat_ioctl.c +5 -2
@@ -798,13 +798,16 @@ static int routing_ioctl(unsigned int fd r = (void *) &r4; } -if (ret) -return -EFAULT ; +if (ret) { + ret = -EFAULT ; + goto out; + }set_fs (KERNEL_DS ); ret =sys_ioctl (fd, cmd, (unsigned long ) r);set_fs (old_fs); +out:if (mysock)sockfd_put (mysock);
--
PATCH 3/11 forcedeth: Initialize link settings in every nv_open()
In reply to Chris Wright-stable review patch. If anyone has any objections, please let us know.
------------------
R�diger found a bug in nv_open that explains some of the reports with duplex mismatches:nv_open calls nv_update_link_speed for initializing the hardware link speed registers. If current link setting matches the values in np->linkspeed and np->duplex, then the function does nothing.
Usually, doing nothing is the right thing, but not in nv_open: During nv_open, the registers must be initialized because the nic was reset.
The attached patch fixes that by setting np->linkspeed to an invalid value before calling nv_update_link_speed from nv_open.
--- drivers/net/forcedeth.c | 3 +++ 1 files changed, 3 insertions(+)
drivers/net/forcedeth.c +3 -0
@@ -1888,6 +1888,9 @@ static int nv_open(struct net_device *dewritel (NVREG_MIISTAT_MASK , base + NvRegMIIStatus);dprintk (KERN_INFO "startup: got 0x%08x.\n" , miistat); } +/* set linkspeed to invalid value, thus force nv_update_linkspeed +* to init hw */ + np->linkspeed =0 ; ret =nv_update_linkspeed (dev);nv_start_rx (dev);nv_start_tx (dev);
--
Re: [PATCH 04/11] hpt366: write the full 4 bytes of ROM address, not just low 1 byte
In reply to Chris Wrightdidn't Linus find similar bugs in a couple of the other hpt drivers as well? if so can they be fixed at the same time?
David Lang
Quoted 54 lines · Chris Wright
Date: Wed, 14 Sep 2005 18:03:47 -0700
From: Chris Wright <[email protected]>
To: [email protected], [email protected]
Cc: Justin Forbes <[email protected]>,
Zwane Mwaikambo <[email protected]>, Theodore Ts'o <[email protected]>, Randy Dunlap <[email protected]>,
Chuck Wolber <[email protected]>, [email protected], [email protected], [email protected], Linus Torvalds <[email protected]>, Chris Wright <[email protected]>
Subject: [PATCH 04/11] hpt366: write the full 4 bytes of ROM address,
not just low 1 byte-stable review patch. If anyone has any objections, please let us know.
------------------This is one heck of a confused driver. It uses a byte write to a dword register to enable a ROM resource that it doesn't even seem to be using.
"Lost and wandering in the desert of confusion"
Signed-off-by Linus Torvalds <[email protected]>Signed-off-by Chris Wright <[email protected]>---
drivers/ide/pci/hpt366.c| 8 ++++++--1 files changed, 6 insertions(+), 2 deletions(-)Index:
linux-2.6.13.y/drivers/ide/pci/hpt366.c
===================================================================drivers/ide/pci/hpt366.c +6
-4@@ -1334,9 +1334,13 @@ static int __devinit init_hpt366(structstatic unsigned int __devinit init_chipset_hpt366 (struct pci_dev *dev,const char *name) {int ret =0 ; -/* FIXME: Not portable */ + +/* +* FIXME: Not portable. Also, why do we enable the ROM in the first place? +* We don't seem to be using it. +*/ if (dev->resource[PCI_ROM_RESOURCE ].start) -pci_write_config_byte (dev,PCI_ROM_ADDRESS , +pci_write_config_dword (dev,PCI_ROM_ADDRESS , dev->resource[PCI_ROM_RESOURCE ].start |PCI_ROM_ADDRESS_ENABLE );pci_write_config_byte (dev,PCI_CACHE_LINE_SIZE , (L1_CACHE_BYTES /4 )); -- -To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Signature · 2 lines
There are two ways of constructing a software design. One way is to make it so simple that there are obviously no deficiencies. And the other way is to make it so complicated that there are no obvious deficiencies. -- C.A.R. Hoare
Re: [PATCH 04/11] hpt366: write the full 4 bytes of ROM address, not just low 1 byte
Quoted 3 lines · David Lang
didn't Linus find similar bugs in a couple of the other hpt drivers as
well? if so can they be fixed at the same time?
Adam Kropelin did a sweep and picked up four similar cases. I queued the patches and they should be considered for 2.6.13.3
Re: [PATCH 04/11] hpt366: write the full 4 bytes of ROM address,not just low 1 byte
Quoted 8 lines · Andrew Morton
Quoted 3 lines · David Lang
didn't Linus find similar bugs in a couple of the other hpt drivers as
well? if so can they be fixed at the same time?Adam Kropelin did a sweep and picked up four similar cases. I queued the patches and they should be considered for 2.6.13.3
Thanks,
David Lang
Signature · 2 lines
There are two ways of constructing a software design. One way is to make it so simple that there are obviously no deficiencies. And the other way is to make it so complicated that there are no obvious deficiencies. -- C.A.R. Hoare
Re: [PATCH 04/11] hpt366: write the full 4 bytes of ROM address, not just low 1 byte
In reply to David LangQuoted 2 lines · * David Lang ([email protected]) wrote:
didn't Linus find similar bugs in a couple of the other hpt drivers as well? if so can they be fixed at the same time?
Yes, and they're in this series. This patch does:
drivers/ide/pci/hpt366.c
And patch 10/11 does:
drivers/ide/pci/cmd64x.cdrivers/ide/pci/hpt34x.c
Additionally, the sungem (5/11) and sunhme (6/11) changes are fallout from PCI_ROM fixes.
I believe the remainder of the PCI_ROM related patches were primarily for consistency.
thanks,
-chris
Quoted 11 lines · On Wed, Sep 14, 2005 at 06:03:43PM -0700 Chris Wright wrote:
This is the start of the stable review cycle for the 2.6.13.2 release. There are 11 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let us know. If anyone is a maintainer of the proper subsystem, and wants to add a signed-off-by: line to the patch, please respond with it.
These patches are sent out with a number of different people on the
Cc: line. If you wish to be a reviewer, please email [email protected] to add your name to the list. If you want to be off the reviewer list, also email us.
This might be worth putting in too (has been hit by at least two people in the real world etc.)
tree e3a704026e65bf6fea0c7747f0fb75a506f54127
parent 32a3658533c6f4c6bf370dd730213e802464ef9b
author Alexander Nyberg <[email protected]> Wed, 14 Sep 2005 18:54:06 +0200 committer Linus Torvalds <[email protected]> Thu, 15 Sep 2005 00:26:34 -0700
[PATCH] Fix fs/exec.c:788 (de_thread()) BUG_ON
It turns out that the BUG_ON() in fs/exec.c: de_thread() is unreliable and can trigger due to the test itself being racy.
de_thread() does
while (atomic_read(&sig->count) > count) {
}
.....
.....
BUG_ON(!thread_group_empty(current));but release_task does
write_lock_irq(&tasklist_lock)
__exit_signal
(this is where atomic_dec(&sig->count) is run)
__exit_sighand
__unhash_process
takes write lock on tasklist_lock remove itself out of PIDTYPE_TGID list
write_unlock_irq(&tasklist_lock)
so there's a clear (although small) window between the atomic_dec(&sig->count) and the actual PIDTYPE_TGID unhashing of the thread.
And actually there is no need for all threads to have exited at this point, so we simply kill the BUG_ON.
Big thanks to Marc Lehmann who provided the test-case.
Fixes Bug 5170 (http://bugme.osdl.org/show_bug.cgi?id=5170)
fs/exec.c | 5 ++--- 1 files changed, 2 insertions(+), 3 deletions(-)
fs/exec.c +2 -3
@@ -745,8 +745,8 @@ static inline int de_thread(struct task_ }/* -* Now there are really no other threads at all, -* so it's safe to stop telling them to kill themselves. +* There may be one thread left which is just exiting, +* but it's safe to stop telling the group to kill themselves. */ sig->flags =0 ;
@@ -785,7 +785,6 @@ no_thread_group:kmem_cache_free (sighand_cachep, oldsighand); } -BUG_ON (!thread_group_empty (current));BUG_ON (!thread_group_leader (current));return 0 ; }
Re: [PATCH 04/11] hpt366: write the full 4 bytes of ROM address, not just low 1 byte
In reply to Chris WrightHello!
Quoted 2 lines
This is one heck of a confused driver. It uses a byte write to a dword register to enable a ROM resource that it doesn't even seem to be using.
Once upon a time when I was the PCI maintainer, I was arguing with Andre Hedrick about this one and he kept asserting that enabling the ROM is necessary to make the chip work. Not that I believe it :)
Have a nice fortnight
Signature · 3 lines
Martin `MJ' Mares <[email protected]> http://atrey.karlin.mff.cuni.cz/~mj/ Faculty of Math and Physics, Charles University, Prague, Czech Rep., Earth Never make any mistaeks.
Re: [PATCH 04/11] hpt366: write the full 4 bytes of ROM address, not just low 1 byte
In reply to Chris WrightQuoted 10 lines · Chris Wright
Quoted 2 lines · * David Lang ([email protected]) wrote:
didn't Linus find similar bugs in a couple of the other hpt drivers as well? if so can they be fixed at the same time?
Yes, and they're in this series. This patch does:
drivers/ide/pci/hpt366.cAnd patch 10/11 does:
Quoted 8 lines
drivers/ide/pci/cmd64x.cdrivers/ide/pci/hpt34x.cAdditionally, the sungem (5/11) and sunhme (6/11) changes are fallout from
PCI_ROMfixes.I believe the remainder of the
PCI_ROMrelated patches were primarily for consistency.
sorry about the noise, I read through all the descriptions looking for these, but I hadn't read all the patches.
David Lang
P.S. thanks to the kernel team for catching this before I got a chance to install .13 on my system that has a hpt374 controller :-)
Signature · 2 lines
There are two ways of constructing a software design. One way is to make it so simple that there are obviously no deficiencies. And the other way is to make it so complicated that there are no obvious deficiencies. -- C.A.R. Hoare
Quoted 2 lines · * Alexander Nyberg ([email protected]) wrote:
This might be worth putting in too (has been hit by at least two people in the real world etc.)
Yes, I'd tagged it to ping you. Thanks, added to -stable queue. -chris