Socket Rev H?
I have been looking all around and going crazy. It seems like
every time I buy Linux supported hardware the manufacturer has upped the revision to screw my compatibilty (WRT54GS, PVR-150, now the socket card, sigh).
As far as I can tell this card does work, but I am having trouble
finding directions on which incantation I need to perform the proper magic.
I am trying to put it on a Zaurus SL-5500 running OpenZaurus 3.5.3
which has a 2.4x kernel in it.
Can someone point me in the right direction, please?
Signature · 15 lines
www.suave.net - Anthony Ball - [email protected] OSB - http://rivendell.suave.net/Beer -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Use hope and imagination as weapons of survival and progress. ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Bluez-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/bluez-users
Marcel Holtmann
maintainerHi Anthony,
Quoted 5 lines
I have been looking all around and going crazy. It seems like
every time I buy Linux supported hardware the manufacturer has upped the revision to screw my compatibilty (WRT54GS, PVR-150, now the socket card, sigh).
Quoted 8 lines
As far as I can tell this card does work, but I am having trouble
finding directions on which incantation I need to perform the proper magic.I am trying to put it on a Zaurus SL-5500 running OpenZaurus 3.5.3
which has a 2.4x kernel in it.Can someone point me in the right direction, please?
the revision H of the card should work with the serial_cs driver and then you have to use the hci_uart driver and hciattach to make this card known to the Bluetooth core.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Ugh.. still having problems... looking all over for serial_cs modules
for 2.4.18-rmk7-pxa3-embedix... I found some precompiled ones that I loaded but dmesg says "ds: unable to create instance of 'serial_cs'!"
Also, when dmesg says
ttyS03 at port 0xc48603f8 (irq = 35) is a 16C950/954
I assume that means /dev/ttyS3... I tried
hciattach ttyS3 csr
hciattach ttyS3 bcsp
and
hciattach ttyS3 any
None of those seem to work.. any gives back hciconfig, but the
address is all zeros...
Thanks a lot for the help, sorry I haven't figured this out already...
Quoted 36 lines · Marcel Holtmann
Hi Anthony,
Quoted 5 lines
I have been looking all around and going crazy. It seems like
every time I buy Linux supported hardware the manufacturer has upped the revision to screw my compatibilty (WRT54GS, PVR-150, now the socket card, sigh).Quoted 8 lines
As far as I can tell this card does work, but I am having trouble
finding directions on which incantation I need to perform the proper magic.I am trying to put it on a Zaurus SL-5500 running OpenZaurus 3.5.3
which has a 2.4x kernel in it.Can someone point me in the right direction, please?
the revision H of the card should work with the
serial_csdriver and then you have to use thehci_uartdriver and hciattach to make this card known to the Bluetooth core.Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Signature · 15 lines
www.suave.net - Anthony Ball - [email protected] OSB - http://rivendell.suave.net/Beer -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Good printers do it without wrinkling the sheets. ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Bluez-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/bluez-users
Marcel Holtmann
maintainerHi Anthony,
Quoted 7 lines
Ugh.. still having problems... looking all over for
serial_csmodules
for 2.4.18-rmk7-pxa3-embedix... I found some precompiled ones that I loaded but dmesg says "ds: unable to create instance of 'serial_cs'!"Also, when dmesg says
ttyS03 at port0xc48603f8(irq = 35) is a 16C950/954
Quoted 8 lines
I assume that means
/dev/ttyS3... I tried
hciattach ttyS3 csr
hciattach ttyS3 bcsp
and
hciattach ttyS3 anyNone of those seem to work.. any gives back hciconfig, but the
address is all zeros...
you need to use bcsp and specify the correct baudrate. Check the mailing list archive for details.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users