hwmon: Drop useless w83627hf
PATCH 10/16 hwmon: Drop useless w83627hf
Drop a useless initialization step in the w83627hf driver. The comment says that the W83627HF PWM2 can be disabled, but it can't. I suppose this is a leftover from the w83781d driver (from which the w83627hf driver is derived), as for example the W83782D had the ability to disable PWM2.
Signed-off-by Jean Delvare <[email protected]>
drivers/hwmon/w83627hf.c | 7 ------- 1 file changed, 7 deletions(-)
drivers/hwmon/w83627hf.c +0 -7
@@ -201,7 +201,6 @@#define W83627HF_REG_PWM1 0x5A#define W83627HF_REG_PWM2 0x5B -#define W83627HF_REG_PWMCLK12 0x5C#define W83627THF_REG_PWM1 0x01/* 697HF and 637HF too */ #define W83627THF_REG_PWM2 0x03/* 697HF and 637HF too */
@@ -1373,12 +1372,6 @@ } } -if (type = w83627hf) { -/* enable PWM2 control (can't hurt since PWM reg -should have been reset to 0xff) */ -w83627hf_write_value (client,W83627HF_REG_PWMCLK12 , -0x19 ); - }/* enable comparator mode for temp2 and temp3 so alarm indication will work correctly */ i =w83627hf_read_value (client,W83781D_REG_IRQ );
Signature · 1 line
Jean Delvare