Skip to contentSkip to conversation

3Ware and 2.6.14, problem resurrected

DISCUSSION subbie subbie 2 participants 2 messages Nov 10, 2005

lore
Share & tools
lore
#0 lore raw

The problem introduced in 2.6.12-mm2 as described below appears to have resurfaced in the latest kernel, 2.6.14.

3ware 9000 Storage Controller device driver for Linux v2.26.03.019fw.
ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 48 (level, low) -> IRQ 18
scsi3 : 3ware 9000 Storage Controller 3w-9xxx: scsi3: Found a 3ware 9000 Storage Controller at 0xfceffc00, IRQ: 18.
3w-9xxx: scsi3: Firmware FE9X 2.08.00.003, BIOS BE9X 2.03.01.052, Ports: 12.
Vendor: Model: Rev:
Type: Direct-Access ANSI SCSI
revision: 00
sdb : sector size 0 reported, assuming 512. SCSI device sdb: 1 512-byte hdwr sectors (0 MB)
sdb: asking for cache data failed
sdb: assuming drive cache: write through
sdb : sector size 0 reported, assuming 512. SCSI device sdb: 1 512-byte hdwr sectors (0 MB)
sdb: asking for cache data failed
sdb: assuming drive cache: write through
sdb: unknown partition table
Attached scsi disk sdb at scsi3, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi3, channel 0, id 0, lun 0, type 0

For a full description, view below

http://lkml.org/lkml/2005/6/26/83

Thanks

__________________________________
Yahoo! Mail - PC Magazine Editors' Choice 2005
http://mail.yahoo.com

#1 lore raw
Quoted 3 lines · subbie subbie

The problem introduced in 2.6.12-mm2 as described below appears to have resurfaced in the latest kernel, 2.6.14.

The driver you are running from the 3ware website does not have the fix for this in it. Please reproduce with the in-kernel v2.26.02.004 driver or download the 9.3.0.1 driver for 9550SX from the 3ware website, it is backward compatible to all 9000 series cards.

-Adam