sa1100 serial: sa1100_start_tx spinlock recursion

The serial core aquires the port spinlock before calling port->ops->start_tx(), so sa1100_start_tx() shouldn't try to lock it again.

BUG: spinlock recursion on CPU#0, init/1
 lock: c0205f20, .magic: dead4ead, .owner: init/1, .owner_cpu: 0
[<c0022cdc>] (dump_stack+0x0/0x14) [<c00dc338>] (spin_bug+0x0/0xbc)   
[<c00dc6b0>] (_raw_spin_lock+0x0/0x170)  r8 = 00000007  r7 = C02FE0070                                                   
[<c018a2a8>] (_spin_lock_irqsave+0x0/0x24)  r4 = C0205F20 
[<c0112110>] (sa1100_start_tx+0x0/0x40)  r4 = C038C000    
[<c010ee38>] (__uart_start+0x0/0x5c) [<c010ee94>] (uart_start+0x0/0x3 
[<c010f1d0>] (uart_write+0x0/0xdc) [<c00fee34>] (write_chan+0x0/0x370 

----

@@ -156,7 +156,7 @@ static void sa1100_stop_tx(struct uart_p
 }
 
 /*
- * interrupts may not be disabled on entry
+ * port locked and interrupts disabled
  */
 static void sa1100_start_tx(struct uart_port *port)
 {

@@ -164,11 +164,9 @@ static void sa1100_start_tx(struct uart_
 	unsigned long flags;
 	u32 utcr3;
 
-	spin_lock_irqsave(&sport->port.lock, flags);
 	utcr3 = UART_GET_UTCR3(sport);
 	sport->port.read_status_mask |= UTSR0_TO_SM(UTSR0_TFS);
 	UART_PUT_UTCR3(sport, utcr3 | UTCR3_TIE);
-	spin_unlock_irqrestore(&sport->port.lock, flags);
 }
 
 /*

Applied, thanks.

PS, please do not copy linux-kernel and linux-arm-kernel. The latter is set for member only posting and it's considered rude to cross post. Thanks.

Russell King
 Linux kernel    2.6 ARM Linux   - http://www.arm.linux.org.uk/
 maintainer of:  2.6 Serial core