Intel Sata controller and DVD-RW
Hi to all.
Few days ago I've buy a new Dell Inspiron 6000 notebook and It seems to have an embedded Intel Sata Controller.
Here's lpsci output:
************
0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
0000:00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) 0000:00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03) 0000:00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
0000:00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
************
Using 2.6.14 shipped by Debian (Sid with udev), I can bootup system but it doesn't recognize dvd-rw and then I can't use it (or I don't know which device I've to choose for fstab entry) .
************
libata version 1.12 loaded.ata_piix version 1.04
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14
ata1: dev 0 cfg 49:2b00 82:346b 83:5b29 84:6003 85:3469 86:9a09 87:6003 88:203f
ata1: dev 0 ATA, max UDMA/100, 156301488 sectors:
ata1(0): applying bridge limits
ata1: dev 0 configured for UDMA/100
scsi0 : ata_piix
Vendor: ATA Model: FUJITSU MHV2080A Rev: 0000
Type: Direct-Access ANSI SCSI revision: 05
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xBFA8 irq 15
input: PS/2 Mouse on isa0060/serio1
input: AlpsPS/2 ALPS GlidePoint on isa0060/serio1
ata2: dev 0 cfg 49:0f00 82:4218 83:5000 84:4000 85:4218 86:1000 87:4000 88:0407
ata2: dev 0 ATAPI, max UDMA/33
ata2(0): applying bridge limits
ata2: dev 0 configured for UDMA/33
scsi1 : ata_piix
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
ReiserFS: sda7: found reiserfs format "3.6" with standard journal
ReiserFS: sda7: using ordered data mode
ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda7: checking transaction log (sda7)
ReiserFS: sda7: Using r5 hash to sort names
************
Looking in /dev directory, I don't see any reference for the dvd-rw, and the official .config shipped with debian package shows modular entries for SCSI, SATA, and IDE controller.
Otherwise, using 2.4.27 from Debian Sarge I see:
************
Nov 12 01:50:33 Chiba kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 Nov 12 01:50:33 Chiba kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Nov 12 01:50:33 Chiba kernel: hda: FUJITSU MHV2080AH, ATA DISK drive Nov 12 01:50:33 Chiba kernel: hdc: TSSTcorp DVD+/-RW TS-L532B, ATAPI CD/DVD-ROM drive Nov 12 01:50:33 Chiba kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Nov 12 01:50:33 Chiba kernel: ide1 at 0x170-0x177,0x376 on irq 15 Nov 12 01:50:33 Chiba kernel: hda: attached ide-disk driver. Nov 12 01:50:33 Chiba kernel: hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=155061/16/63 Nov 12 01:50:33 Chiba kernel: Partition check: Nov 12 01:50:33 Chiba kernel: /dev/ide/host0/bus0/target0/lun0: [PTBL] [9729/255/63] p1 p2 p3 p4 < p5 p6 p7 p8 p9 > Nov 12 01:50:33 Chiba kernel: reiserfs: found format "3.6" with standard journal Nov 12 01:50:33 Chiba kernel: reiserfs: checking transaction log (device ide0 (3,7)) ... Nov 12 01:50:33 Chiba kernel: for (ide0(3,7)) Nov 12 01:50:33 Chiba kernel: ide0(3,7):Using r5 hash to sort names
************
and it works fine (I used it for the installation), but I can't use alsa and other laptop features.
I've also tried to change this behaviour, using ide boot parameters but I haven't luck.
Same result when I try to boot a 2.6.15-rc1 with the config taken from 2.6.14 debian package.
Now, if I want to use a recent 2.6 kernel, how can I setup the .config file? Any ideas?
There's no problem to give other informations if they're needed.
Thanks in advance.
Signature · 5 lines
Il reggiseno e' uno strumento democratico perche' separa la destra dalla sinistra, solleva le masse e attira i popoli. www.debianizzati.org | Founder Member Mario "Ldonesty" Di Nitto --- [Linux Registered User #334335]
libata.atapi_enabled=1 in /boot/grub/menu.lst,
or this line in /etc/modprobe.conf:
options libata atapi_enabled=1