Skip to contentSkip to conversation

intel8x0 sound of silence on dell system

DISCUSSION Benjamin LaHaise 5 participants 9 messages Nov 18, 2005 – Nov 21, 2005

lore
Share & tools
lore
#0 lore raw

Hello all,

On trying out head on my workstation, it seems that no sound comes out. The module is getting loaded and the interrupts line for the 'Intel ICH5' is increasing. The RHEL 4 kernel is known to work on this machine. The only output from the driver is below. Any ideas?

-ben

intel8x0_measure_ac97_clock: measured 51314 usecs
intel8x0: clocking to 48000

Signature · 2 lines
"Time is what keeps everything from happening all at once." -- John Wheeler
Don't Email: <[email protected]>.
#1 lore raw

Probably the sound car is muted. you might want to try out the alsamixer to unmute the card.

Quoted 20 lines · Benjamin LaHaise

Hello all,

On trying out head on my workstation, it seems that no sound comes out. The module is getting loaded and the interrupts line for the 'Intel ICH5' is increasing. The RHEL 4 kernel is known to work on this machine. The only output from the driver is below. Any ideas?

-ben

intel8x0_measure_ac97_clock: measured 51314 usecs
intel8x0: clocking to 48000
--
"Time is what keeps everything from happening all at once." -- John Wheeler Don't Email: <[email protected]>.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#2 lore raw

No, like I said, booting the RHEL4 kernel works like a charm. alsamixer does not show it being muted.

-ben

Quoted 24 lines · Bharath Ramesh

Probably the sound car is muted. you might want to try out the alsamixer to unmute the card.

Quoted 20 lines · Benjamin LaHaise

Hello all,

On trying out head on my workstation, it seems that no sound comes out. The module is getting loaded and the interrupts line for the 'Intel ICH5' is increasing. The RHEL 4 kernel is known to work on this machine. The only output from the driver is below. Any ideas?

-ben

intel8x0_measure_ac97_clock: measured 51314 usecs
intel8x0: clocking to 48000
--
"Time is what keeps everything from happening all at once." -- John Wheeler Don't Email: <[email protected]>.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Signature · 2 lines
"Time is what keeps everything from happening all at once." -- John Wheeler
Don't Email: <[email protected]>.
#3 lore raw
Quoted 2 lines · Benjamin LaHaise

No, like I said, booting the RHEL4 kernel works like a charm. alsamixer does not show it being muted.

Sometimes, mine would get in the same state, but on a laptop.

You can try adding buggy_irq=1, buggy_semaphore=1 or both to your modprobe.conf file, and see if any of those help. It did in my case.

Signature · 3 lines
-- John E. Jasen ([email protected])
-- No one will sorrow for me when I die, because those who would
-- are dead already. -- Lan Mandragoran, The Wheel of Time, New Spring
#4 lore raw
Quoted 2 lines · John Jasen

You can try adding buggy_irq=1, buggy_semaphore=1 or both to your modprobe.conf file, and see if any of those help. It did in my case.

Doesn't seem to have an effect here.

-ben

Signature · 2 lines
"Time is what keeps everything from happening all at once." -- John Wheeler
Don't Email: <[email protected]>.
#6 lore raw
In reply to Bharath Ramesh

Sorry, but it isn't muted. I'm not a newbie. ;-)

-ben

Quoted 29 lines · Bharath Ramesh

Probably the sound car is muted. you might want to try out the alsamixer to unmute the card.

Quoted 9 lines · Benjamin LaHaise

Hello all,

On trying out head on my workstation, it seems that no sound comes out. The module is getting loaded and the interrupts line for the 'Intel ICH5' is increasing. The RHEL 4 kernel is known to work on this machine. The only output from the driver is below. Any ideas?

-ben

Quoted 11 lines

intel8x0_measure_ac97_clock: measured 51314 usecs
intel8x0: clocking to 48000
--
"Time is what keeps everything from happening all at once." -- John Wheeler Don't Email: <[email protected]>.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Signature · 2 lines
"Time is what keeps everything from happening all at once." -- John Wheeler
Don't Email: <[email protected]>.
#7 lore raw
In reply to Benjamin LaHaise
Quoted 11 lines · Benjamin LaHaise

Hello all,

On trying out head on my workstation, it seems that no sound comes out. The module is getting loaded and the interrupts line for the 'Intel ICH5' is increasing. The RHEL 4 kernel is known to work on this machine. The only output from the driver is below. Any ideas?

-ben

intel8x0_measure_ac97_clock: measured 51314 usecs
intel8x0: clocking to 48000

What do you mean "head"? Kernel version please.

ALSA bug reports should go to [email protected] or (ideally) in the ALSA bug tracker,
https://bugtrack.alsa-project.org/alsa-bug/main_page.php

Lee

#5 lore raw
In reply to Benjamin LaHaise
Quoted 5 lines · Benjamin LaHaise
Quoted 2 lines · John Jasen

You can try adding buggy_irq=1, buggy_semaphore=1 or both to your modprobe.conf file, and see if any of those help. It did in my case.

Doesn't seem to have an effect here.

any dmesg or /var/log/messages output?

lspci output of the card?

entry from modprobe.conf?

Signature · 3 lines
-- John E. Jasen ([email protected])
-- No one will sorrow for me when I die, because those who would
-- are dead already. -- Lan Mandragoran, The Wheel of Time, New Spring
#8 lore raw
In reply to Lee Revell

At Fri, 18 Nov 2005 16:51:50 -0500,

Quoted 11 lines · Lee Revell
Quoted 9 lines · Benjamin LaHaise

Hello all,

On trying out head on my workstation, it seems that no sound comes out. The module is getting loaded and the interrupts line for the 'Intel ICH5' is increasing. The RHEL 4 kernel is known to work on this machine. The only output from the driver is below. Any ideas?

-ben

Quoted 8 lines
Quoted 2 lines

intel8x0_measure_ac97_clock: measured 51314 usecs
intel8x0: clocking to 48000

What do you mean "head"? Kernel version please.

ALSA bug reports should go to [email protected] or (ideally) in the ALSA bug tracker,
https://bugtrack.alsa-project.org/alsa-bug/main_page.php

What ALSA version is used on RHEL4 kernel?

Also, please add the contents of /proc/asound/card0/codec97#0/* files, and the saved file after running
alsactl -f somefile store
in your bugreport.

thanks,

Takashi