i2c: Add support for Barco LTP->DVI to
Subsystems (2)
PATCH 5/25 i2c: Add support for Barco LTP->DVI to
From: Peter Korsgaard <[email protected]>
Content-Disposition: inline; filename=i2c-parport-barco-ltp-dvi.patch
The following patch adds support for the Barco LTP->DVI I2C adapter to the i2c-parport driver.
Signed-off-by Peter Korsgaard <[email protected]>
Signed-off-by Jean Delvare <[email protected]>
--- Documentation/i2c/busses/i2c-parport | 1 + drivers/i2c/busses/i2c-parport.h | 12 +++++++++++- 2 files changed, 12 insertions(+), 1 deletion(-)
Documentation/i2c/busses/i2c-parport +1 -0
@@ -17,6 +17,7 @@ * Velleman K8000 adapter * ELV adapter * Analog Devices evaluation boards (ADM1025, ADM1030, ADM1031, ADM1032) + * Barco LPT->DVI (K5800236) adapter These devices use different pinout configurations, so you have to tell the driver what you have, using the type module parameter. There is no
drivers/i2c/busses/i2c-parport.h +11 -1
@@ -80,6 +80,14 @@ .setscl = { 0x01, DATA, 1 }, .getsda = { 0x10, STAT, 1 }, }, + /* type 6: Barco LPT->DVI (K5800236) adapter */ + { + .setsda = { 0x02, DATA, 1 }, + .setscl = { 0x01, DATA, 1 }, + .getsda = { 0x20, STAT, 0 }, + .getscl = { 0x40, STAT, 0 }, + .init = { 0xfc, DATA, 0 }, + }, };static int type;
@@ -91,4 +99,6 @@" 2 = Velleman K8000 adapter\n" " 3 = ELV adapter\n" " 4 = ADM1032 evaluation board\n" - " 5 = ADM1025, ADM1030 and ADM1031 evaluation boards\n"); +" 5 = ADM1025, ADM1030 and ADM1031 evaluation boards\n" +" 6 = Barco LPT->DVI (K5800236) adapter\n" +);
Signature · 1 line
Jean Delvare