Skip to contentSkip to conversation

Linking fails on sparc64 with 2.6.15-rc6 and Sun GEM Ethernet driver

PATCH In review Nils Meyer 3 participants 3 messages Dec 21, 2005 – Dec 22, 2005

Subsystems (2)
lore
Share & tools
lore

Nils Meyer

author
#0 lore raw

Hi,

When compiling 2.6.15-rc6 or 2.6.14.4 on my sparc I get the following error:

local symbol 0: discarded in section `.exit.text' from drivers/built-in.o [*]

After calling scripts/reference_discarded.pl it gives me the following error:

Error: ./drivers/net/sungem.o .init.text refers to 0000000000000448
R_SPARC_WDISP30 .exit.text

When I disable the Sun GEM driver in the configuration it compiles cleanly (didn't try booting as I need the network working to connect to the server).

Let me know if you need more information. I can also provide remote access (ssh) to the server if needed.

kind regards
Nils Meyer

* Last command executed by make:
ld -m elf64_sparc -o .tmp_vmlinux1 -T arch/sparc64/kernel/vmlinux.lds arch/sparc64/kernel/head.o arch/sparc64/kernel/init_task.o init/built-in.o --start-group usr/built-in.o arch/sparc64/kernel/built-in.o arch/sparc64/mm/built-in.o arch/sparc64/math-emu/built-in.o kernel/built-in.o mm/built-in.o fs/built-in.o ipc/built-in.o security/built-in.o crypto/built-in.o block/built-in.o lib/lib.a arch/sparc64/prom/lib.a arch/sparc64/lib/lib.a lib/built-in.o arch/sparc64/prom/built-in.o arch/sparc64/lib/built-in.o drivers/built-in.o sound/built-in.o net/built-in.o --end-group

Signature · 4 lines
n@work Internet Informationssysteme | Nils Meyer <[email protected]>
[email protected] - http://www.work.de      | - Technik
tel: 040/238809-0                   | 
fax: 040/238909-29                  | Spaldingstr. 160d, 20097 Hamburg 
#1 lore raw

PATCH 1/1 drivers/net/sungem.c: gem_remove_one mustn't be __devexit

Quoted 1 line · Nils Meyer

Hi,

Hi Nils,

Quoted 9 lines

When compiling 2.6.15-rc6 or 2.6.14.4 on my sparc I get the following error:

local symbol 0: discarded in section `.exit.text' from drivers/built-in.o [*]

After calling scripts/reference_discarded.pl it gives me the following error:

Error: ./drivers/net/sungem.o .init.text refers to 0000000000000448
R_SPARC_WDISP30 .exit.text
...

thanks for this report.

The untested patch below should fix this bug (I'm assuming your .config hasn't set CONFIG_HOTPLUG).

It's a real problem that these bugs have become runtime errors in kernel 2.6 on i386 instead of link errors as they were in kernel 2.4 on i386 (and are still in kernel kernel 2.6 on some other architectures like sparc64) resulting in fewer people noticing them. :-(

Quoted 2 lines

kind regards
Nils Meyer

cu
Adrian

<-- snip -->

gem_remove_one() is called from the __devinit gem_init_one().

Therefore, gem_remove_one() mustn't be __devexit.

drivers/net/sungem.c renamed from drivers/net/sungem.c.old +2 -2
@@ -2907,7 +2907,7 @@
 	return 0;
 }
 
-static void __devexit gem_remove_one(struct pci_dev *pdev)
+static void gem_remove_one(struct pci_dev *pdev)
 {
 	struct net_device *dev = pci_get_drvdata(pdev);
 
@@ -3181,7 +3181,7 @@
 	.name		= GEM_MODULE_NAME,
 	.id_table	= gem_pci_tbl,
 	.probe		= gem_init_one,
-	.remove		= __devexit_p(gem_remove_one),
+	.remove		= gem_remove_one,
 #ifdef CONFIG_PM
 	.suspend	= gem_suspend,
 	.resume		= gem_resume,
maintainer
#2 lore raw

Re: [2.6 patch] drivers/net/sungem.c: gem_remove_one mustn't be __devexit

From: Adrian Bunk <[email protected]>
Date: Wed, 21 Dec 2005 14:25:43 +0100

Quoted 5 lines

gem_remove_one() is called from the __devinit gem_init_one().

Therefore, gem_remove_one() mustn't be __devexit.

Looks good, applied, thanks Adrian.