scsi errors with dpt-i2o driver
Hi,
We have been experiencing long system pauses (~30 seconds), and think we have tracked it down to
a scsi issue. The syslog just after the pause has:
Dec 22 04:12:06 tux224 kernel: dpti0: Trying to Abort cmd=264682 Dec 22 04:12:06 tux224 kernel: dpti0: Abort cmd not supported Dec 22 04:12:06 tux224 kernel: dpti0: Trying to Abort cmd=264683 Dec 22 04:12:06 tux224 kernel: dpti0: Abort cmd not supported Dec 22 04:12:06 tux224 kernel: dpti0: Trying to Abort cmd=264684 Dec 22 04:12:06 tux224 kernel: dpti0: Abort cmd not supported Dec 22 04:12:06 tux224 kernel: dpti0: Trying to reset device Dec 22 04:12:06 tux224 kernel: dpti0: Device reset not supported Dec 22 04:12:06 tux224 kernel: dpti0: Bus reset: SCSI Bus 0: tid: 9 Dec 22 04:12:06 tux224 kernel: dpti0: Bus reset success.
The previous time seen by the system (as reported by sar with a 1-second frequency), was 04:11:29. These errors seem to happen only every few days, and we have not found a means to reproduce them on demand.
Are there any suggestions about how to diagnose further? What about trying the native i2o driver?
Details:
The machine is a dual Opteron rack-mount server.
kernel is 2.6.15-rc6 w/ preempt.
lspci:
0000:00:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07) 0000:00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05) 0000:00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03) 0000:00:07.2 SMBus: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0 (rev 02) 0000:00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05) 0000:00:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) 0000:00:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01) 0000:00:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) 0000:00:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01) 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:02:05.0 RAID bus controller: Adaptec (formerly DPT) SmartRAID V Controller (rev 01) 0000:02:09.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 03) 0000:02:09.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 03) 0000:03:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) 0000:03:00.1 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) 0000:03:06.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
The scsi controller is model 2015s. The disks are Seagate Cheetah Ultra 320 - model ST336607LC.
Other potentially interresting messages from dmesg:
[ 1.490153] Loading Adaptec I2O RAID: Version 2.4 Build 5go [ 1.496872] Detecting Adaptec I2O RAID controllers... [ 1.502983] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 26 (level, low) -> IRQ 169 [ 1.512165] Adaptec I2O RAID controller 0 irq=169 [ 1.517865] BAR0 f8880000 - size= 100000 [ 1.523127] BAR1 f8a00000 - size= 1000000 [ 3.391459] dpti: If you have a lot of devices this could take a few minutes. [ 3.400032] dpti0: Reading the hardware resource table. [ 13.298799] TID 008 Vendor: ADAPTEC Device: AIC-7902 Rev: 00000001 [ 13.309206] TID 009 Vendor: ADAPTEC Device: AIC-7902 Rev: 00000001 [ 13.324229] TID 523 Vendor: ADAPTEC R Device: RAID-10 Rev: 3B05D [ 13.337469] scsi0 : Vendor: Adaptec Model: 2015S FW:3B05 [ 13.345860] Vendor: ADAPTEC Model: RAID-10 Rev: 3B05 [ 13.355339] Type: Direct-Access ANSI SCSI revision: 02 [ 13.365151] Adaptec aacraid driver (1.1-4 Dec 20 2005 09:00:40) [ 13.372343] megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005) [ 13.381055] megaraid: 2.20.4.6 (Release Date: Mon Mar 07 12:27:22 EST 2005) [ 13.389406] megasas: 00.00.02.00-rc4 Fri Sep 16 12:37:08 EDT 2005 [ 13.396752] 3ware 9000 Storage Controller device driver for Linux v2.26.02.004. [ 13.413525] SCSI device sda: 143372288 512-byte hdwr sectors (73407 MB) [ 13.424515] SCSI device sda: drive cache: write back [ 13.432733] SCSI device sda: 143372288 512-byte hdwr sectors (73407 MB) [ 13.443708] SCSI device sda: drive cache: write back [ 13.449709] sda: sda1 sda2 < sda5 sda6 sda7 sda8 > [ 13.505791] sd 0:0:0:0: Attached scsi disk sda
thanks,
-Kenny
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Quoted 2 lines
Are there any suggestions about how to diagnose further? What about trying the native i2o driver?
that one is highly preferred anyway nowadays...
Quoted 4 lines · --- Arjan van de Ven
Quoted 1 line
Are there any suggestions about how to diagnose further? What about trying the native i2o
driver?
that one is highly preferred anyway nowadays...
Is there a more recent reference than http://i2o.shadowconnect.com/faq.php, or a mailing list for i2o driver issues? For example, our bonnie runs suggest that dpt_i2o is a quite bit faster at sequential writes, and how do we get the firmware rev of the controller from the i2o subsystem?
-Kenny
__________________________________
Yahoo! for Good - Make a difference this year.
http://brand.yahoo.com/cybergivingweek2005/
In article <[email protected]>,
Quoted 5 lines · Arjan van de Ven
Quoted 2 lines
Are there any suggestions about how to diagnose further? What about
trying the native i2o driver?
that one is highly preferred anyway nowadays...
Well in 64-bit mode it's still very very unstable at least with the Adaptec dpt 2005/2010/2015 series adapters. Also it doesn't support 32-bit legacy ioctls and the raidtools package doesn't compile correctly on 64-bits (it compiles but doesn't work).
The 64-bit version of dpt_i2o that you can get from Adaptec on request (unfortunately the 64 bit patches aren't in mainline (yet?)) works fine and is rock-stable.
Mike.
Signature · 1 line
Freedom is no longer a problem.