mutex subsystem, add include/asm-i386/mutex.h

Index: linux/include/asm-i386/mutex.h
===================================================================
@@ -0,0 +1,140 @@
+/*
+ * Assembly implementation of the mutex fastpath, based on atomic
+ * decrement/increment.
+ *
+ * started by Ingo Molnar:
+ *
+ *  Copyright (C) 2004, 2005 Red Hat, Inc., Ingo Molnar <[email protected]>
+ */
+#ifndef _ASM_MUTEX_H
+#define _ASM_MUTEX_H
+
+/**
+ *  __mutex_fastpath_lock - try to take the lock by moving the count
+ *                          from 1 to a 0 value
+ *  @count: pointer of type atomic_t
+ *  @fn: function to call if the original value was not 1
+ *
+ * Change the count from 1 to a value lower than 1, and call <fn> if it
+ * wasn't 1 originally. This function MUST leave the value lower than 1
+ * even when the "1" assertion wasn't true.
+ */
+#define __mutex_fastpath_lock(count, fn_name)				\
+do {									\
+	/* type-check the function too: */				\
+	void fastcall (*__tmp)(atomic_t *) = fn_name;			\
+	unsigned int dummy;						\
+									\
+	(void)__tmp;							\
+	typecheck(atomic_t *, count);					\
+									\
+	__asm__ __volatile__(						\
+		LOCK	"   decl (%%eax)	\n"			\
+			"   js 2f		\n"			\
+			"1:			\n"			\
+									\
+		LOCK_SECTION_START("")					\
+			"2: call "#fn_name"	\n"			\
+			"   jmp 1b		\n"			\
+		LOCK_SECTION_END					\
+									\
+		:"=a" (dummy)						\
+		: "a" (count)						\
+		: "memory", "ecx", "edx");				\
+} while (0)
+
+
+/**
+ *  __mutex_fastpath_lock_retval - try to take the lock by moving the count
+ *                                 from 1 to a 0 value
+ *  @count: pointer of type atomic_t
+ *  @fn: function to call if the original value was not 1
+ *
+ * Change the count from 1 to a value lower than 1, and call <fn> if it
+ * wasn't 1 originally. This function returns 0 if the fastpath succeeds,
+ * or anything the slow path function returns
+ */
+static inline int
+__mutex_fastpath_lock_retval(atomic_t *count,
+			     int fastcall (*fn_name)(atomic_t *))
+{
+	if (unlikely(atomic_dec_return(count) < 0))
+		return fn_name(count);
+	else
+		return 0;
+}
+
+/**
+ *  __mutex_fastpath_unlock - try to promote the mutex from 0 to 1
+ *  @count: pointer of type atomic_t
+ *  @fn: function to call if the original value was not 0
+ *
+ * try to promote the mutex from 0 to 1. if it wasn't 0, call <fn>.
+ * In the failure case, this function is allowed to either set the value
+ * to 1, or to set it to a value lower than 1.
+ *
+ * If the implementation sets it to a value of lower than 1, the
+ * __mutex_slowpath_needs_to_unlock() macro needs to return 1, it needs
+ * to return 0 otherwise.
+ */
+#define __mutex_fastpath_unlock(count, fn_name)				\
+do {									\
+	/* type-check the function too: */				\
+	void fastcall (*__tmp)(atomic_t *) = fn_name;			\
+	unsigned int dummy;						\
+									\
+	(void)__tmp;							\
+	typecheck(atomic_t *, count);					\
+									\
+	__asm__ __volatile__(						\
+		LOCK	"   incl (%%eax)	\n"			\
+			"   jle 2f		\n"			\
+			"1:			\n"			\
+									\
+		LOCK_SECTION_START("")					\
+			"2: call "#fn_name"	\n"			\
+			"   jmp 1b		\n"			\
+		LOCK_SECTION_END					\
+									\
+		:"=a" (dummy)						\
+		: "a" (count)						\
+		: "memory", "ecx", "edx");				\
+} while (0)
+
+#define __mutex_slowpath_needs_to_unlock()	1
+
+/**
+ * __mutex_fastpath_trylock - try to acquire the mutex, without waiting
+ *
+ *  @count: pointer of type atomic_t
+ *  @fn: fallback function
+ *
+ * Change the count from 1 to a value lower than 1, and return 0 (failure)
+ * if it wasn't 1 originally, or return 1 (success) otherwise. This function
+ * MUST leave the value lower than 1 even when the "1" assertion wasn't true.
+ * Additionally, if the value was < 0 originally, this function must not leave
+ * it to 0 on failure.
+ */
+static inline int
+__mutex_fastpath_trylock(atomic_t *count, int (*fn)(atomic_t *))
+{
+	/*
+	 * We have two variants here. The cmpxchg based one is the best one
+	 * because it never induce a false contention state.  It is included
+	 * here because architectures using the inc/dec algorithms over the
+	 * xchg ones are much more likely to support cmpxchg natively.
+	 *
+	 * If not we fall back to the spinlock based variant - that is
+	 * just as efficient (and simpler) as a 'destructive' probing of
+	 * the mutex state would be.
+	 */
+#ifdef __HAVE_ARCH_CMPXCHG
+	if (likely(atomic_cmpxchg(count, 1, 0)) == 1)
+		return 1;
+	return 0;
+#else
+	return fn(count);
+#endif
+}
+
+#endif