Skip to contentSkip to conversation

TerraTec MIDI HUBBLE USB quirk

DISCUSSION Sebastian Reichelt 1 participant 1 message Dec 27, 2005

lore
Share & tools
lore
#0 lore raw

Hello!

The TerraTec MIDI HUBBLE USB device provides two MIDI IN and OUT ports, but it seems to lack the correct interface class value (see attached output of lsusb -v). I thought this could be fixed by adding the following to sound/usb/usbquirks.h:

{
       USB_DEVICE_VENDOR_SPEC(0x0ccd, 0x0032),
       .driver_info = (unsigned long) & (const snd_usb_audio_quirk_t) {
               .vendor_name = "TerraTec Producer",
               .product_name = "MIDI HUBBLE",
               .ifnum = 0,
               .type = QUIRK_MIDI_STANDARD_INTERFACE
       }
},

But the USB subsystem still doesn't know it can use the snd_usb_audio driver for this device (e.g. shown by usbmodules), and it is not registered as an ALSA card. Is there anything I have to do in addition to this, or did I do something wrong? The files modules.alias and modules.usbmap got updated correctly, but I don't know who reads them at what time.

The strangest thing is that it worked on one day, even though I had not done anything special yet.

I hope you can help me. Thank you very much in advance.

BTW: I thought about posting this in the linux-sound mailing list, but it seems to be dead. Posts are almost never answered, including a post I made about a solution to another sound problem (http://marc.theaimsgroup.com/?l=linux-sound&m=113261865703607&w=2). (Since then, a few people who have the same problem have contacted me; all of them would like the fix to be integrated into the kernel.)

Signature · 1 line
Sebastian Reichelt

Bus 002 Device 003: ID 0ccd:0032 TerraTec Electronic GmbH Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10

  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x0ccd TerraTec Electronic GmbH
  idProduct          0x0032 
  bcdDevice            1.08
  iManufacturer           1 TerraTec Producer
  iProduct                2 MIDI HUBBLE
  iSerial                 0 
  bNumConfigurations      1

Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 54
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 0 (Defined at Interface level)
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
bRefresh 0
bSynchAddress 0
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
bRefresh 0
bSynchAddress 0
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
bRefresh 0
bSynchAddress 0
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
bRefresh 0
bSynchAddress 0
Device Status: 0x0000
(Bus Powered)