spelling: s/usefull/useful/
Subsystems (8)
PATCH 1/1 spelling: s/usefull/useful/
Signed-off-by Adrian Bunk <[email protected]>
---
Documentation/networking/sk98lin.txt | 2 +- Documentation/power/swsusp.txt | 4 ++-- Makefile | 2 +- arch/xtensa/kernel/time.c | 2 +- drivers/media/radio/radio-sf16fmr2.c | 2 +- drivers/net/sk98lin/skdim.c | 2 +- drivers/net/sk98lin/skge.c | 2 +- drivers/net/sk98lin/skgepnmi.c | 8 ++++---- drivers/w1/Kconfig | 2 +- 9 files changed, 13 insertions(+), 13 deletions(-)
arch/xtensa/kernel/time.c renamed from arch/xtensa/kernel/time.c.old +1 -1
@@ -201,7 +201,7 @@if ((signed long )(get_ccount () - next) >0 ) goto again; -/* Allow platform to do something usefull (Wdog). */ +/* Allow platform to do something useful (Wdog). */ platform_heartbeat ();
Documentation/networking/sk98lin.txt renamed from Documentation/networking/sk98lin.txt.old +1 -1
@@ -245,7 +245,7 @@ This parameters is only relevant if auto-negotiation for this port is not set to "Sense". If auto-negotiation is set to "On", all three values are possible. If it is set to "Off", only "Full" and "Half" are allowed. -This parameter is usefull if your link partner does not support all +This parameter is useful if your link partner does not support all possible combinations. Flow Control
Documentation/power/swsusp.txt renamed from Documentation/power/swsusp.txt.old +2 -2
@@ -212,7 +212,7 @@ cat `cat /proc/[0-9]*/maps | grep / | sed 's:.* /:/:' | sort -u` > /dev/null -after resume. swapoff -a; swapon -a may also be usefull. +after resume. swapoff -a; swapon -a may also be useful. Q: What happens to devices during swsusp? They seem to be resumed during system suspend?
@@ -323,7 +323,7 @@ A: No, it should work okay, as long as your app does not mlock() it. Just prepare big enough swap partition. -Q: What information is usefull for debugging suspend-to-disk problems? +Q: What information is useful for debugging suspend-to-disk problems? A: Well, last messages on the screen are always useful. If something is broken, it is usually some kernel driver, therefore trying with as
drivers/media/radio/radio-sf16fmr2.c renamed from drivers/media/radio/radio-sf16fmr2.c.old +1 -1
@@ -48,7 +48,7 @@static int radio_nr =-1 ;/* hw precision is 12.5 kHz -* It is only usefull to give freq in intervall of 200 (=0.0125Mhz), +* It is only useful to give freq in intervall of 200 (=0.0125Mhz), * other bits will be truncated */ #define RSF16_ENCODE (x) ((x)/200+856)
drivers/net/sk98lin/skdim.c renamed from drivers/net/sk98lin/skdim.c.old +1 -1
@@ -180,7 +180,7 @@/* ** The number of interrupts per sec is the same as expected. ** Evalulate the descriptor-ratio. If it has changed, a resize -** in the moderation timer might be usefull +** in the moderation timer might be useful */ if (M_DIMINFO .AutoSizing) {ResizeDimTimerDuration (pAC);
drivers/net/sk98lin/skge.c renamed from drivers/net/sk98lin/skge.c.old +1 -1
@@ -2859,7 +2859,7 @@* Description: * This function is called if an ioctl is issued on the device. * There are three subfunction for reading, writing and test-writing -* the private MIB data structure (usefull for SysKonnect-internal tools). +* the private MIB data structure (useful for SysKonnect-internal tools). * * Returns: * 0, if everything is ok
drivers/net/sk98lin/skgepnmi.c renamed from drivers/net/sk98lin/skgepnmi.c.old +4 -4
@@ -607,7 +607,7 @@* Description: * Calls a general sub-function for all this stuff. The preset does * the same as a set, but returns just before finally setting the -* new value. This is usefull to check if a set might be successfull. +* new value. This is useful to check if a set might be successfull. * If the instance -1 is passed, an array of values is supposed and * all instances of the OID will be set. *
@@ -650,7 +650,7 @@* Description: * Calls a general sub-function for all this stuff. The preset does * the same as a set, but returns just before finally setting the -* new value. This is usefull to check if a set might be successfull. +* new value. This is useful to check if a set might be successfull. * If the instance -1 is passed, an array of values is supposed and * all instances of the OID will be set. *
@@ -866,7 +866,7 @@* Description: * Calls a general sub-function for all this set stuff. The preset does * the same as a set, but returns just before finally setting the -* new value. This is usefull to check if a set might be successfull. +* new value. This is useful to check if a set might be successfull. * The sub-function runs through the IdTable, checks which OIDs are able * to set, and calls the handler function of the OID to perform the * preset. The return value of the function will also be stored in
@@ -6324,7 +6324,7 @@* * Description: * The COMMON module only tells us if the mode is half or full duplex. -* But in the decade of auto sensing it is usefull for the user to +* But in the decade of auto sensing it is useful for the user to * know if the mode was negotiated or forced. Therefore we have a * look to the mode, which was last used by the negotiation process. *
drivers/w1/Kconfig renamed from drivers/w1/Kconfig.old +1 -1
@@ -3,7 +3,7 @@ config W1 tristate "Dallas's 1-wire support" ---help--- - Dallas's 1-wire bus is usefull to connect slow 1-pin devices + Dallas's 1-wire bus is useful to connect slow 1-pin devices such as iButtons and thermal sensors. If you want W1 support, you should say Y here.
Makefile renamed from Makefile.old +1 -1
@@ -251,7 +251,7 @@ # If it is set to "silent_", nothing wil be printed at all, since # the variable $(silent_cmd_cc_o_c) doesn't exist. # -# A simple variant is to prefix commands with $(Q) - that's usefull +# A simple variant is to prefix commands with $(Q) - that's useful # for commands that shall be hidden in non-verbose mode. # # $(Q)ln $@ :<
Quoted 2 lines
Subject: [2.6 patch] spelling: s/usefull/useful/
ACK++ to the whole row!
Jan Engelhardt