Skip to contentSkip to conversation

Thinkpad docking station: pci hotplug questions

PATCH Pavel Machek 2 participants 4 messages Jan 8, 2006 – Jan 10, 2006

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Hi!

I'm trying to get PCI hotplug to work on thinkpad x32 -- it is apparently neccessary for proper docking station support. What needs to be done to get it running?

I noticed some strangenesses:

pcihpfs is mentioned in Kconfig, but I can't find it anywhere in kernel

CONFIG_HOTPLUG_PCI_PCIE exists in Makefile but not in Kconfig.

And here are some coding style fixes:

drivers/pci/hotplug/acpiphp_ibm.c +9 -12
@@ -302,7 +302,7 @@ static int ibm_get_table_from_acpi(char 
 	}
 
 	package = (union acpi_object *) buffer.pointer;
-	if(!(package) ||
+	if (!(package) ||
 			(package->type != ACPI_TYPE_PACKAGE) ||
 			!(package->package.elements)) {
 		err("%s:  Invalid APCI object\n", __FUNCTION__);
@@ -405,7 +405,7 @@ static acpi_status __init ibm_find_acpi_
 	}
 	info.hardware_id.value[sizeof(info.hardware_id.value) - 1] = '\0';
 
-	if(info.current_status && (info.valid & ACPI_VALID_HID) &&
+	if (info.current_status && (info.valid & ACPI_VALID_HID) &&
 			(!strcmp(info.hardware_id.value, IBM_HARDWARE_ID1) ||
 			!strcmp(info.hardware_id.value, IBM_HARDWARE_ID2))) {
 		dbg("found hardware: %s, handle: %p\n", info.hardware_id.value,
@@ -449,13 +449,11 @@ static int __init ibm_acpiphp_init(void)
 	}
 
 	ibm_note.device = device;
-	status = acpi_install_notify_handler(
-			ibm_acpi_handle,
-			ACPI_DEVICE_NOTIFY,
-			ibm_handle_events,
+	status = acpi_install_notify_handler(ibm_acpi_handle,
+			ACPI_DEVICE_NOTIFY, ibm_handle_events,
 			&ibm_note);
 	if (ACPI_FAILURE(status)) {
-		err("%s:  Failed to register notification handler\n",
+		err("%s: Failed to register notification handler\n",
 				__FUNCTION__);
 		retval = -EBUSY;
 		goto init_cleanup;
@@ -482,14 +480,13 @@ static void __exit ibm_acpiphp_exit(void
 	if (acpiphp_unregister_attention(&ibm_attention_info))
 		err("%s: attention info deregistration failed", __FUNCTION__);
 
-	   status = acpi_remove_notify_handler(
+	status = acpi_remove_notify_handler(
 			   ibm_acpi_handle,
 			   ACPI_DEVICE_NOTIFY,
 			   ibm_handle_events);
-	   if (ACPI_FAILURE(status))
-		   err("%s:  Notification handler removal failed\n",
-				   __FUNCTION__);
-	// remove the /sys entries
+	if (ACPI_FAILURE(status))
+		err("%s: Notification handler removal failed\n", __FUNCTION__);
+	/* remove the /sys entries */
 	if (sysfs_remove_bin_file(sysdir, &ibm_apci_table_attr))
 		err("%s: removal of sysfs file apci_table failed\n",
 				__FUNCTION__);
drivers/pci/hotplug/ibmphp_core.c +2 -2
@@ -235,12 +235,12 @@ static int set_attention_status(struct h
 {
 	int rc = 0;
 	struct slot *pslot;
-	u8 cmd;
+	u8 cmd = 0x00;     /* avoid compiler warning */
 
 	debug("set_attention_status - Entry hotplug_slot[%lx] value[%x]\n",
 			(ulong) hotplug_slot, value);
 	ibmphp_lock_operations();
-	cmd = 0x00;     // avoid compiler warning
+
 
 	if (hotplug_slot) {
 		switch (value) {
Signature · 1 line
Thanks, Sharp!
#1 lore raw
Quoted 10 lines · Pavel Machek

Hi!

I'm trying to get PCI hotplug to work on thinkpad x32 -- it is apparently neccessary for proper docking station support. What needs to be done to get it running?

I noticed some strangenesses:

pcihpfs is mentioned in Kconfig, but I can't find it anywhere in kernel

Yeah, that's 2.4 stuff, you don't need that anymore, everything shows up in sysfs now.

Quoted 1 line

CONFIG_HOTPLUG_PCI_PCIE exists in Makefile but not in Kconfig.

Did you look in drivers/pci/pcie/Kconfig?

Quoted 1 line

And here are some coding style fixes:

Thanks, I'll queue these up.

greg k-h

#2 lore raw

Hi!

Quoted 11 lines
Quoted 8 lines

I'm trying to get PCI hotplug to work on thinkpad x32 -- it is apparently neccessary for proper docking station support. What needs to be done to get it running?

I noticed some strangenesses:

pcihpfs is mentioned in Kconfig, but I can't find it anywhere in kernel

Yeah, that's 2.4 stuff, you don't need that anymore, everything shows up in sysfs now.

Here's a fix. Where in sysfs should I find that?

root@amd:/sys# find . -name "*hot*"
./module/"pci_hotplug"
Quoted 3 lines
Quoted 1 line

CONFIG_HOTPLUG_PCI_PCIE exists in Makefile but not in Kconfig.

Did you look in drivers/pci/pcie/Kconfig?

No, oops, you are right.

--- snip here ---

Remove reference to pcihpfs that no longer exists.

drivers/pci/hotplug/Kconfig +1 -2
@@ -11,8 +11,7 @@ config HOTPLUG_PCI
 	---help---
 	  Say Y here if you have a motherboard with a PCI Hotplug controller.
 	  This allows you to add and remove PCI cards while the machine is
-	  powered up and running.  The file system pcihpfs must be mounted
-	  in order to interact with any PCI Hotplug controllers.
+	  powered up and running.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called pci_hotplug.
Signature · 1 line
Thanks, Sharp!
#3 lore raw
Quoted 11 lines · Pavel Machek

Hi!

Quoted 9 lines
Quoted 8 lines

I'm trying to get PCI hotplug to work on thinkpad x32 -- it is apparently neccessary for proper docking station support. What needs to be done to get it running?

I noticed some strangenesses:

pcihpfs is mentioned in Kconfig, but I can't find it anywhere in kernel

Quoted 7 lines
Quoted 2 lines

Yeah, that's 2.4 stuff, you don't need that anymore, everything shows up in sysfs now.

Here's a fix. Where in sysfs should I find that?

root@amd:/sys# find . -name "*hot*"
./module/"pci_hotplug"

Look in /sys/bus/pci/slots/

thanks,

greg k-h