Skip to contentSkip to conversation

PATCH: cpu-freq user-guide.txt

PATCH Andras Gefferth 1 participant 1 message Jan 10, 2006 2 messages not in the archive

Subsystems (2)
lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

#2 lore raw

Dear Dominik,

I rewrote my previous version according to your comments, and also made some restructureing, all the new stuff is now at the beginning.

Short description of the patch:

Added a few words to the cpu-freq user-guide.txt so that the user can see what is needed to enable the feature. Patch applies to kernels: 2.6.XX

Signed-off-by Andras Gefferth <g_a at freemail dot hu>

This is the patch:

Documentation/cpu-freq/user-guide.txt 2006-01-10 12:28:15.000000000 +0100 renamed from Documentation/cpu-freq/user-guide.txt.orig 2006-01-10 12:27:42.000000000 +0100 +30 -0
@@ -17,6 +17,11 @@
 
 Contents:
 ---------
+0. Prerequisites
+0.1 Processor
+0.2 Bios
+0.3 Kernel
+
 1. Supported Architectures and Processors
 1.1 ARM
 1.2 x86
@@ -32,6 +37,31 @@ Contents:
 3.1 Preferred interface: sysfs
 3.2 Deprecated interfaces
 
+0. Prerequisites
+================
+
+0.1 Processor
+-------------
+
+Check whether your processor supports scaling!
+See: "1. Supported Architectures and Processors"
+
+0.2 BIOS
+--------
+
+Check whether scaling is enabled in the BIOS!
+It might have various names, like "SpeedStep", or "PowerNow", etc.
+
+0.3 Kernel
+----------
+
+Scaling has to be enabled in the kernel.
+Look at "Power management options"/"CPU Frequency scaling"!
+Here you have to select the governor(s) you need (see section 2.2 Governor),
+and the type of processor you have.
+If compiled as modules the governors can be found in
+/lib/modules/$(uname -r)/kernel/drivers/cpufreq/, and the processor drivers in
+/lib/modules/$(uname -r)/kernel/arch/i386/kernel/cpu/cpufreq/
 
 
 1. Supported Architectures and Processors