fusion: kzalloc / kcalloc conversion
Subsystems (2)
PATCH 1/1 fusion: kzalloc / kcalloc conversion
Convert kmalloc + memset to kzalloc or kcalloc in fusion.
Signed-off-by Christoph Hellwig <[email protected]>
drivers/message/fusion/mptbase.c +1 -2
@@ -1232,12 +1232,11 @@ dprintk((KERN_INFO MYNAM ": Not using 64 bit consistent mask\n")); - ioc =kmalloc (sizeof (MPT_ADAPTER ),GFP_ATOMIC ); + ioc =kzalloc (sizeof (MPT_ADAPTER ),GFP_ATOMIC );if (ioc ==NULL ) { printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n");return -ENOMEM ; } -memset (ioc,0 ,sizeof (MPT_ADAPTER )); ioc->alloc_total =sizeof (MPT_ADAPTER ); ioc->req_sz =MPT_DEFAULT_FRAME_SIZE ;/* avoid div by zero! */ ioc->reply_sz =MPT_REPLY_FRAME_SIZE ;
drivers/message/fusion/mptfc.c +8 -18
@@ -148,11 +148,10 @@MPT_SCSI_HOST *hd;MPT_ADAPTER *ioc;unsigned long flags; -int sz, ii; +int ii;int numSGE =0 ;int scale;int ioc_cap; -u8 *mem;int error=0 ;int r;
@@ -268,36 +267,27 @@/* SCSI needs scsi_cmnd lookup table! * (with size equal to req_depth*PtrSz!) */ - sz = ioc->req_depth *sizeof (void *); - mem =kmalloc (sz,GFP_ATOMIC ); -if (mem ==NULL ) { + hd->ScsiLookup =kcalloc (ioc->req_depth,sizeof (void *),GFP_ATOMIC ); +if (!hd->ScsiLookup) { error = -ENOMEM ; goto out_mptfc_probe; } -memset (mem,0 , sz); - hd->ScsiLookup = (struct scsi_cmnd **) mem; - -dprintk ((MYIOC_s_INFO_FMT"ScsiLookup @ %p, sz=%d\n" , - ioc->name, hd->ScsiLookup, sz)); +dprintk ((MYIOC_s_INFO_FMT"ScsiLookup @ %p\n" , + ioc->name, hd->ScsiLookup));/* Allocate memory for the device structures. * A non-Null pointer at an offset * indicates a device exists. * max_id = 1 + maximum id (hosts.h) */ - sz = sh->max_id *sizeof (void *); - mem =kmalloc (sz,GFP_ATOMIC ); -if (mem ==NULL ) { + hd->Targets =kcalloc (sh->max_id,sizeof (void *),GFP_ATOMIC ); +if (!hd->Targets) { error = -ENOMEM ; goto out_mptfc_probe; } -memset (mem,0 , sz); - hd->Targets = (VirtTarget **) mem; - -dprintk ((KERN_INFO -" vdev @ %p, sz=%d\n" , hd->Targets, sz)); +dprintk ((KERN_INFO " vdev @ %p\n" , hd->Targets));/* Clear the TM flags */
drivers/message/fusion/mptlan.c +5 -9
@@ -411,14 +411,12 @@ goto out; priv->mpt_txfidx_tail =-1 ; - priv->SendCtl =kmalloc (priv->tx_max_out *sizeof (struct BufferControl ), + priv->SendCtl =kcalloc (priv->tx_max_out,sizeof (struct BufferControl ),GFP_KERNEL );if (priv->SendCtl ==NULL ) goto out_mpt_txfidx; -for (i =0 ; i < priv->tx_max_out; i++) { -memset (&priv->SendCtl[i],0 ,sizeof (struct BufferControl )); +for (i =0 ; i < priv->tx_max_out; i++) priv->mpt_txfidx[++priv->mpt_txfidx_tail] = i; - } dlprintk((KERN_INFO MYNAM "@lo: Finished initializing SendCtl\n"));
@@ -428,15 +426,13 @@ goto out_SendCtl; priv->mpt_rxfidx_tail =-1 ; - priv->RcvCtl =kmalloc (priv->max_buckets_out * -sizeof (struct BufferControl ), + priv->RcvCtl =kcalloc (priv->max_buckets_out, +sizeof (struct BufferControl ),GFP_KERNEL );if (priv->RcvCtl ==NULL ) goto out_mpt_rxfidx; -for (i =0 ; i < priv->max_buckets_out; i++) { -memset (&priv->RcvCtl[i],0 ,sizeof (struct BufferControl )); +for (i =0 ; i < priv->max_buckets_out; i++) priv->mpt_rxfidx[++priv->mpt_rxfidx_tail] = i; - } /**/ dlprintk((KERN_INFO MYNAM "/lo: txfidx contains - "));/**/ for (i =0 ; i < priv->tx_max_out; i++)
drivers/message/fusion/mptsas.c +11 -24
@@ -258,13 +258,12 @@struct scsi_target *starget;int i; - vdev =kmalloc (sizeof (VirtDevice),GFP_KERNEL ); + vdev =kzalloc (sizeof (VirtDevice),GFP_KERNEL );if (!vdev) {printk (MYIOC_s_ERR_FMT"slave_alloc kmalloc(%zd) FAILED!\n" , hd->ioc->name,sizeof (VirtDevice));return -ENOMEM ; } -memset (vdev,0 ,sizeof (VirtDevice)); vdev->ioc_id = hd->ioc->id; sdev->hostdata = vdev; starget =scsi_target (sdev);
@@ -1044,10 +1043,9 @@u32 handle =0xFFFF ;int error = -ENOMEM , i; - port_info =kmalloc (sizeof (*port_info),GFP_KERNEL ); + port_info =kzalloc (sizeof (*port_info),GFP_KERNEL );if (!port_info) goto out; -memset (port_info,0 ,sizeof (*port_info)); error =mptsas_sas_io_unit_pg0 (ioc, port_info);if (error)
@@ -1096,10 +1094,9 @@struct mptsas_portinfo *port_info, *p;int error = -ENOMEM , i, j; - port_info =kmalloc (sizeof (*port_info),GFP_KERNEL ); + port_info =kzalloc (sizeof (*port_info),GFP_KERNEL );if (!port_info) goto out; -memset (port_info,0 ,sizeof (*port_info)); error = mptsas_sas_expander_pg0(ioc, port_info, (MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE <<
@@ -1390,11 +1387,10 @@MPT_SCSI_HOST *hd;MPT_ADAPTER *ioc;unsigned long flags; -int sz, ii; +int ii;int numSGE =0 ;int scale;int ioc_cap; -u8 *mem;int error=0 ;int r;
@@ -1518,36 +1514,27 @@/* SCSI needs scsi_cmnd lookup table! * (with size equal to req_depth*PtrSz!) */ - sz = ioc->req_depth *sizeof (void *); - mem =kmalloc (sz,GFP_ATOMIC ); -if (mem ==NULL ) { + hd->ScsiLookup =kcalloc (ioc->req_depth,sizeof (void *),GFP_ATOMIC ); +if (!hd->ScsiLookup) { error = -ENOMEM ; goto out_mptsas_probe; } -memset (mem,0 , sz); - hd->ScsiLookup = (struct scsi_cmnd **) mem; - -dprintk ((MYIOC_s_INFO_FMT"ScsiLookup @ %p, sz=%d\n" , - ioc->name, hd->ScsiLookup, sz)); +dprintk ((MYIOC_s_INFO_FMT"ScsiLookup @ %p\n" , + ioc->name, hd->ScsiLookup));/* Allocate memory for the device structures. * A non-Null pointer at an offset * indicates a device exists. * max_id = 1 + maximum id (hosts.h) */ - sz = sh->max_id *sizeof (void *); - mem =kmalloc (sz,GFP_ATOMIC ); -if (mem ==NULL ) { + hd->Targets =kcalloc (sh->max_id,sizeof (void *),GFP_ATOMIC ); +if (!hd->Targets) { error = -ENOMEM ; goto out_mptsas_probe; } -memset (mem,0 , sz); - hd->Targets = (VirtTarget **) mem; - -dprintk ((KERN_INFO -" vtarget @ %p, sz=%d\n" , hd->Targets, sz)); +dprintk ((KERN_INFO " vtarget @ %p\n" , hd->Targets));/* Clear the TM flags */
drivers/message/fusion/mptscsih.c +2 -4
@@ -2162,10 +2162,9 @@ {VirtTarget *vtarget; - vtarget =kmalloc (sizeof (VirtTarget),GFP_KERNEL ); + vtarget =kzalloc (sizeof (VirtTarget),GFP_KERNEL );if (!vtarget)return -ENOMEM ; -memset (vtarget,0 ,sizeof (VirtTarget)); starget->hostdata = vtarget;return 0 ; }
@@ -2185,14 +2184,13 @@VirtDevice *vdev;struct scsi_target *starget; - vdev =kmalloc (sizeof (VirtDevice),GFP_KERNEL ); + vdev =kzalloc (sizeof (VirtDevice),GFP_KERNEL );if (!vdev) {printk (MYIOC_s_ERR_FMT"slave_alloc kmalloc(%zd) FAILED!\n" , hd->ioc->name,sizeof (VirtDevice));return -ENOMEM ; } -memset (vdev,0 ,sizeof (VirtDevice)); vdev->ioc_id = hd->ioc->id; vdev->target_id = sdev->id; vdev->bus_id = sdev->channel;
drivers/message/fusion/mptspi.c +8 -18
@@ -158,11 +158,10 @@MPT_SCSI_HOST *hd;MPT_ADAPTER *ioc;unsigned long flags; -int sz, ii; +int ii;int numSGE =0 ;int scale;int ioc_cap; -u8 *mem;int error=0 ;int r;
@@ -288,36 +287,27 @@/* SCSI needs scsi_cmnd lookup table! * (with size equal to req_depth*PtrSz!) */ - sz = ioc->req_depth *sizeof (void *); - mem =kmalloc (sz,GFP_ATOMIC ); -if (mem ==NULL ) { + hd->ScsiLookup =kcalloc (ioc->req_depth,sizeof (void *),GFP_ATOMIC ); +if (!hd->ScsiLookup) { error = -ENOMEM ; goto out_mptspi_probe; } -memset (mem,0 , sz); - hd->ScsiLookup = (struct scsi_cmnd **) mem; - -dprintk ((MYIOC_s_INFO_FMT"ScsiLookup @ %p, sz=%d\n" , - ioc->name, hd->ScsiLookup, sz)); +dprintk ((MYIOC_s_INFO_FMT"ScsiLookup @ %p\n" , + ioc->name, hd->ScsiLookup));/* Allocate memory for the device structures. * A non-Null pointer at an offset * indicates a device exists. * max_id = 1 + maximum id (hosts.h) */ - sz = sh->max_id *sizeof (void *); - mem =kmalloc (sz,GFP_ATOMIC ); -if (mem ==NULL ) { + hd->Targets =kcalloc (sh->max_id,sizeof (void *),GFP_ATOMIC ); +if (!hd->Targets) { error = -ENOMEM ; goto out_mptspi_probe; } -memset (mem,0 , sz); - hd->Targets = (VirtTarget **) mem; - -dprintk ((KERN_INFO -" vdev @ %p, sz=%d\n" , hd->Targets, sz)); +dprintk ((KERN_INFO " vdev @ %p\n" , hd->Targets));/* Clear the TM flags */