Skip to contentSkip to conversation

udev/hotplug and automatic /dev node creation

DISCUSSION Horst Schirmeier 2 participants 5 messages Jan 18, 2006 – Jan 25, 2006

lore
Share & tools
lore
#0 lore raw

Hi,

I'm looking for documentation regarding how to write a Linux kernel module that creates its own /dev node via udev/hotplug. register_chrdev() and a simple udev/rules.d/ entry don't seem to be sufficient...

Any suggestions on where to start reading are welcome.

Kind regards,
Horst

Signature · 1 line
PGP-Key 0xD40E0E7A
#1 lore raw
Quoted 6 lines · Horst Schirmeier

Hi,

I'm looking for documentation regarding how to write a Linux kernel module that creates its own /dev node via udev/hotplug. register_chrdev() and a simple udev/rules.d/ entry don't seem to be sufficient...

Yes, register_chrdev() will do nothing for udev.

Take a look at the book, Linux Device Drivers, third edition (free online). In the chapter about the driver model, there is a section about what udev needs. The functions it says to use are no longer in the kernel, but it should point you in the right direction (hint, use class_device_create().)

If you have a pointer to your code, I can probably knock out a patch for you very quickly.

thanks,

greg k-h

#2 lore raw
Quoted 8 lines · Greg KH
Quoted 6 lines · Horst Schirmeier

Hi,

I'm looking for documentation regarding how to write a Linux kernel module that creates its own /dev node via udev/hotplug. register_chrdev() and a simple udev/rules.d/ entry don't seem to be sufficient...

Quoted 7 lines

Yes, register_chrdev() will do nothing for udev.

Take a look at the book, Linux Device Drivers, third edition (free online). In the chapter about the driver model, there is a section about what udev needs. The functions it says to use are no longer in the kernel, but it should point you in the right direction (hint, use class_device_create().)

Thank you very much, I'll look into this book and class_device_create().

Quoted 2 lines

If you have a pointer to your code, I can probably knock out a patch for you very quickly.

I have no doubt you'll be able to do that, but my primary intention is to dig into that myself :) thanks again.

Kind regards,
Horst

Signature · 1 line
PGP-Key 0xD40E0E7A
#3 lore raw
In reply to Greg KH
Quoted 10 lines · Greg KH
Quoted 6 lines · Horst Schirmeier

Hi,

I'm looking for documentation regarding how to write a Linux kernel module that creates its own /dev node via udev/hotplug. register_chrdev() and a simple udev/rules.d/ entry don't seem to be sufficient...

Yes, register_chrdev() will do nothing for udev.

Quoted 8 lines

Take a look at the book, Linux Device Drivers, third edition (free online). In the chapter about the driver model, there is a section about what udev needs. The functions it says to use are no longer in the kernel, but it should point you in the right direction (hint, use class_device_create().)

If you have a pointer to your code, I can probably knock out a patch for you very quickly.

Now I'm using class_create() and class_device_create() (together with class_device_destroy() and class_destroy()), which works fine on 2.6.15 and 2.6.16-rc1, and with some hackish LINUX_VERSION_CODE-checking #define wrapper around class_device_create() also on 2.6.13 and 2.6.14...

But: Is there a common way to get this working on 2.6.12 or earlier?

Kind regards,
Horst

Signature · 1 line
PGP-Key 0xD40E0E7A
#4 lore raw
Quoted 20 lines · Horst Schirmeier
Quoted 10 lines · Greg KH
Quoted 6 lines · Horst Schirmeier

Hi,

I'm looking for documentation regarding how to write a Linux kernel module that creates its own /dev node via udev/hotplug. register_chrdev() and a simple udev/rules.d/ entry don't seem to be sufficient...

Yes, register_chrdev() will do nothing for udev.

Quoted 8 lines

Take a look at the book, Linux Device Drivers, third edition (free online). In the chapter about the driver model, there is a section about what udev needs. The functions it says to use are no longer in the kernel, but it should point you in the right direction (hint, use class_device_create().)

If you have a pointer to your code, I can probably knock out a patch for you very quickly.

Quoted 7 lines

Now I'm using class_create() and class_device_create() (together with class_device_destroy() and class_destroy()), which works fine on 2.6.15 and 2.6.16-rc1, and with some hackish LINUX_VERSION_CODE-checking #define wrapper around class_device_create() also on 2.6.13 and 2.6.14...

But: Is there a common way to get this working on 2.6.12 or earlier?

Look at the class_simple* functions in that older kernel version. They should do much of the same thing of what you need.

Hope this helps,

greg k-h