spinlockup detection on POWER3
Does the CONFIG_DEBUG_SPINLOCK code somehow depend on the cpu type? It triggers alot on a p270 POWER3 box, even during early boot. I dont see it on POWE4/5.
This is with 2.6.15+
...
PCI: Probing PCI hardware
Failed to request PCI IO region on PCI domain 0000
IOMMU table initialized, virtual merging enabled
ISA bridge at 0000:00:0b.0
mapping IO f8000000 -> d000080000000000, size: 1000000 mapping IO f9000000 -> d000080001000000, size: 1000000
PCI: Probing PCI hardware done
usbcore: registered new driver usbfs
usbcore: registered new driver hub
TC classifier action (bugs to [email protected] cc [email protected]) IBM eBus Device Driver
RTAS daemon started
audit: initializing netlink socket (disabled) audit(1137918797.139:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Using unsupported 1024x768 display at c0000000, depth=8, pitch=1024
Console: switching to colour frame buffer device 128x48
fb0: Open Firmware frame buffer device on /pci@fef00000/display@f
HVSI: registered 0 devices
Generic RTC Driver v1.07
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
BUG: spinlock lockup on CPU#3, hotplug/1384, c000000000456900 Call Trace: [C00000003FD37900] [C00000000000ED88] .show_stack+0x68/0x1b0 (unreliable) [C00000003FD379A0] [C0000000001C9780] ._raw_spin_lock+0x110/0x150 [C00000003FD37A20] [C000000000369960] .lock_kernel+0x3c/0x64 [C00000003FD37AA0] [C0000000000CF8D8] .chrdev_open+0x1b4/0x268 [C00000003FD37B50] [C0000000000C0538] .__dentry_open+0x160/0x300 [C00000003FD37C00] [C0000000000C084C] .do_filp_open+0x50/0x70 [C00000003FD37D00] [C0000000000C08E0] .do_sys_open+0x74/0x12c [C00000003FD37DB0] [C0000000000FCB24] .compat_sys_open+0x24/0x38 [C00000003FD37E30] [C0000000000086F8] syscall_exit+0x0/0x40
serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A serial8250.0: ttyS2 at I/O 0x898 (irq = 15) is a 16550Apmac_zilog: 0.6 (Benjamin Herrenschmidt <[email protected]>) RAMDISK driver initialized: 16 RAM disks of 123456K size 1024 blocksize
loop: loaded (max 8 devices)
input: Macintosh mouse button emulation as /class/input/input0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Raw Set 2 keyboard as /class/input/input1
...
Signature · 2 lines
short story of a lazy sysadmin: alias appserv=wotan
Quoted 5 lines · Olaf Hering
Does the
CONFIG_DEBUG_SPINLOCKcode somehow depend on the cpu type? It triggers alot on a p270 POWER3 box, even during early boot. I dont see it on POWE4/5.BUG: spinlock lockup on CPU#3, hotplug/1384, c000000000456900
...
this was cause by per_cpu data corruption.
Signature · 2 lines
short story of a lazy sysadmin: alias appserv=wotan