Add support for Freescale M5271 processor
PATCH 1/1 Add support for Freescale M5271 processor
This change (and the two that will follow it) can be pulled from
http://labxtechnologies.com/u-boot.git. This is in preparation for the next patch adds a new board that uses the 5271. Please let me know if this patch or the following ones need any work.
CHANGELOG
* Add support for Freescale M5271 processor
Patch by Zachary Landau, 26 Jan 2006
Signed-off-by Zachary P. Landau <[email protected]>
---
CHANGELOG | 3 +++ cpu/mcf52x2/cpu.c | 40 ++++++++++++++++++++++++++++++++++++++++ cpu/mcf52x2/cpu_init.c | 37 +++++++++++++++++++++++++++++++++++++ cpu/mcf52x2/fec.c | 22 +++++++++++++++++++++- cpu/mcf52x2/interrupts.c | 7 ++++++- cpu/mcf52x2/serial.c | 8 +++++++- cpu/mcf52x2/start.S | 34 +++++++++++++++++++++++++++++++++- include/asm-m68k/mcftimer.h | 2 +- include/asm-m68k/mcfuart.h | 2 +- include/asm-m68k/ptrace.h | 2 +- lib_m68k/time.c | 9 +++++++-- 11 files changed, 157 insertions(+), 9 deletions(-)
eacbd317757327e8e7f018f5701c950429c4c6ae
CHANGELOG +3 -0
@@ -2,6 +2,9 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Add support for Freescale M5271 processor + Patch by Zachary Landau, 26 Jan 2006 + * Fix 28F256J3A support on PM520 board (without bank-switching only 32 MB can be accessed)
cpu/mcf52x2/cpu.c +40 -0
@@ -25,6 +25,11 @@#include <watchdog.h> #include <command.h> +#ifdef CONFIG_M5271 +#include <asm/immap_5271.h> +#include <asm/m5271.h> +#endif +#ifdef CONFIG_M5272 #include <asm/immap_5272.h> #include <asm/m5272.h>
@@ -38,6 +43,41 @@#include <asm/m5249.h> #endif +#ifdef CONFIG_M5271 +int checkcpu (void ) +{ +puts ("CPU: MOTOROLA Coldfire MCF5271\n" ); +return 0 ; +} + +int do_reset (cmd_tbl_t *cmdtp,bd_t *bd,int flag,int argc,char *argv[]) { +mbar_writeByte (MCF_RCM_RCR , +MCF_RCM_RCR_SOFTRST |MCF_RCM_RCR_FRCRSTOUT ); +return 0 ; +}; + +#if defined(CONFIG_WATCHDOG ) +void watchdog_reset (void ) +{ +mbar_writeShort (MCF_WTM_WSR ,0x5555 ); +mbar_writeShort (MCF_WTM_WSR ,0xAAAA ); +} + +int watchdog_disable (void ) +{ +mbar_writeShort (MCF_WTM_WCR ,0 ); +return (0 ); +} + +int watchdog_init (void ) +{ +mbar_writeShort (MCF_WTM_WCNTR ,CONFIG_WATCHDOG_TIMEOUT ); +mbar_writeShort (MCF_WTM_WCR ,MCF_WTM_WCR_EN ); +return (0 ); +} +#endif /* #ifdef CONFIG_WATCHDOG */ + +#endif #ifdef CONFIG_M5272 int do_reset (cmd_tbl_t *cmdtp,bd_t *bd,int flag,int argc,char *argv[]) {
cpu/mcf52x2/cpu_init.c +37 -0
@@ -24,6 +24,11 @@#include <common.h> #include <watchdog.h> +#ifdef CONFIG_M5271 +#include <asm/m5271.h> +#include <asm/immap_5271.h> +#endif +#ifdef CONFIG_M5272 #include <asm/m5272.h> #include <asm/immap_5272.h>
@@ -38,6 +43,38 @@#include <asm/m5249.h> #endif +#if defined(CONFIG_M5271 ) +void cpu_init_f (void ) +{ +#ifndef CONFIG_WATCHDOG +/* Disable the watchdog if we aren't using it */ +mbar_writeShort (MCF_WTM_WCR ,0 ); +#endif + +/* Set clockspeed to 100MHz */ +mbar_writeShort (MCF_FMPLL_SYNCR , +MCF_FMPLL_SYNCR_MFD (0 ) |MCF_FMPLL_SYNCR_RFD (0 )); +while (!mbar_readByte (MCF_FMPLL_SYNSR ) &MCF_FMPLL_SYNSR_LOCK ); + +/* Enable UART pins */ +mbar_writeShort (MCF_GPIO_PAR_UART ,MCF_GPIO_PAR_UART_U0TXD | +MCF_GPIO_PAR_UART_U0RXD | +MCF_GPIO_PAR_UART_U1RXD_UART1 | +MCF_GPIO_PAR_UART_U1TXD_UART1 ); + +/* Enable Ethernet pins */ +mbar_writeByte (MCF_GPIO_PAR_FECI2C ,CFG_FECI2C ); +} + +/* +* initialize higher level parts of CPU like timers +*/ +int cpu_init_r (void ) +{ +return (0 ); +} +#endif +#if defined(CONFIG_M5272 )/* * Breath some life into the CPU...
cpu/mcf52x2/fec.c +21 -1
@@ -25,6 +25,11 @@#include <malloc.h> #include <asm/fec.h> +#ifdef CONFIG_M5271 +#include <asm/m5271.h> +#include <asm/immap_5271.h> +#endif +#ifdef CONFIG_M5272 #include <asm/m5272.h> #include <asm/immap_5272.h>
@@ -41,7 +46,7 @@#ifdef CONFIG_M5272 #define FEC_ADDR (CFG_MBAR + 0x840)#endif -#ifdef CONFIG_M5282 +#if defined(CONFIG_M5282 ) || defined(CONFIG_M5271 )#define FEC_ADDR (CFG_MBAR + 0x1000)#endif
@@ -240,10 +245,22 @@ int eth_init (bd_t * bd)#endif #undef ea +#ifdef CONFIG_M5271 +/* Clear multicast address hash table +*/ + fecp->fec_ghash_table_high =0 ; + fecp->fec_ghash_table_low =0 ; + +/* Clear individual address hash table +*/ + fecp->fec_ihash_table_high =0 ; + fecp->fec_ihash_table_low =0 ; +#else /* Clear multicast address hash table */ fecp->fec_hash_table_high =0 ; fecp->fec_hash_table_low =0 ; +#endif /* Set maximum receive buffer size. */
@@ -295,6 +312,9 @@ int eth_init (bd_t * bd) fecp->fec_x_cntrl =FEC_TCNTRL_FDEN ;#else /* Half duplex mode */ fecp->fec_r_cntrl =FEC_RCNTRL_MII_MODE |FEC_RCNTRL_DRT ; +#ifdef CONFIG_M5271 + fecp->fec_r_cntrl |= (PKT_MAXBUF_SIZE <<16 );/* set max frame length */ +#endif fecp->fec_x_cntrl =0 ;#endif /* Set MII speed */
cpu/mcf52x2/interrupts.c +6 -1
@@ -27,6 +27,11 @@#include <watchdog.h> #include <asm/processor.h> +#ifdef CONFIG_M5271 +#include <asm/m5271.h> +#include <asm/immap_5271.h> +#endif +#ifdef CONFIG_M5272 #include <asm/m5272.h> #include <asm/immap_5272.h>
@@ -171,7 +176,7 @@ int interrupt_init (void) }#endif -#ifdef CONFIG_M5282 +#if defined(CONFIG_M5282 ) || defined(CONFIG_M5271 )int interrupt_init (void ) {return 0 ;
cpu/mcf52x2/serial.c +7 -1
@@ -26,6 +26,10 @@#include <asm/mcfuart.h> +#ifdef CONFIG_M5271 +#include <asm/m5271.h> +#endif +#ifdef CONFIG_M5272 #include <asm/m5272.h> #endif
@@ -46,7 +50,7 @@void rs_serial_setbaudrate (int port,int baudrate) { -#if defined(CONFIG_M5272 ) || defined(CONFIG_M5249 ) +#if defined(CONFIG_M5272 ) || defined(CONFIG_M5249 ) || defined(CONFIG_M5271 )volatile unsigned char *uartp;double clock, fraction;
@@ -61,8 +65,10 @@ void rs_serial_setbaudrate(int port,int uartp[MCFUART_UBG1 ] = (((int )clock >>8 ) &0xff );/* set msb baud */ uartp[MCFUART_UBG2 ] = ((int )clock &0xff );/* set lsb baud */ +#ifndef CONFIG_M5271 uartp[MCFUART_UFPD ] = ((int )fraction &0xf );/* set baud fraction adjust */ #endif +#endif };void rs_serial_init (int port,int baudrate)
cpu/mcf52x2/start.S +33 -1
@@ -55,7 +55,11 @@ */ _vectors: +#ifndef CONFIG_M5271 .long 0x00000000, _START +#else +.long 0x00000000, 0x400 /* Flash offset is 0 until we setup CS0 */ +#endif .long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT .long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT .long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
@@ -124,26 +128,42 @@ _start: movec %d0, %RAMBAR0 #endif /* #if defined(CONFIG_M5272) || defined(CONFIG_M5249) */ -#ifdef CONFIG_M5282 +#if defined(CONFIG_M5282) || defined(CONFIG_M5271) /* Initialize IPSBAR */ move.l #(CFG_MBAR + 1), %d0 /* set IPSBAR address + valid flag */ move.l %d0, 0x40000000 +#ifdef CONFIG_M5282 /* Initialize FLASHBAR: locate internal Flash and validate it */ move.l #(CFG_INT_FLASH_BASE + 0x21), %d0 movec %d0, %RAMBAR0 +#endif /* Initialize RAMBAR1: locate SRAM and validate it */ move.l #(CFG_INIT_RAM_ADDR + 0x21), %d0 movec %d0, %RAMBAR1 +#ifdef CONFIG_M5271 + move.l #(_flash_setup-CFG_FLASH_BASE), %a0 + move.l #(_flash_setup_end-CFG_FLASH_BASE), %a1 + move.l #(CFG_INIT_RAM_ADDR), %a2 +_copy_flash: + move.l (%a0)+, (%a2)+ + cmp.l %a0, %a1 + bgt.s _copy_flash +#endif + + jmp CFG_INIT_RAM_ADDR +_after_flash_copy: #endif +#if 0 /* invalidate and disable cache */ move.l #0x01000000, %d0 /* Invalidate cache cmd */ movec %d0, %CACR /* Invalidate cache */ move.l #0, %d0 movec %d0, %ACR0 movec %d0, %ACR1 +#endif /* set stackpointer to end of internal ram to get some stackspace for the first c-code */ move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET), %sp
@@ -158,6 +178,18 @@ _start: /*------------------------------------------------------------------------------*/ +#ifdef CONFIG_M5271 +_flash_setup: + move.l #0x1000, %d0 + move.w %d0, 0x40000080 + move.l #0x2180, %d0 + move.w %d0, 0x4000008A + move.l #0x3f0001, %d0 + move.l %d0, 0x40000084 + jmp _after_flash_copy.L +_flash_setup_end: +#endif + /* * void relocate_code (addr_sp, gd, addr_moni) *
include/asm-m68k/mcftimer.h +1 -1
@@ -45,7 +45,7 @@#elif defined(CONFIG_M5249 ) || defined(CONFIG_M5307 ) || defined(CONFIG_M5407 )#define MCFTIMER_BASE1 0x140/* Base address of TIMER1 */ #define MCFTIMER_BASE2 0x180/* Base address of TIMER2 */ -#elif defined(CONFIG_M5282 ) +#elif defined(CONFIG_M5282 ) | defined(CONFIG_M5271 )#define MCFTIMER_BASE1 0x150000/* Base address of TIMER1 */ #define MCFTIMER_BASE2 0x160000/* Base address of TIMER2 */ #define MCFTIMER_BASE3 0x170000/* Base address of TIMER4 */
include/asm-m68k/mcfuart.h +1 -1
@@ -46,7 +46,7 @@#define MCFUART_BASE1 0x140/* Base address of UART1 */ #define MCFUART_BASE2 0x180/* Base address of UART2 */ #endif -#elif defined(CONFIG_M5282) +#elif defined(CONFIG_M5282) || defined(CONFIG_M5271)#define MCFUART_BASE1 0x200/* Base address of UART1 */ #define MCFUART_BASE2 0x240/* Base address of UART2 */ #define MCFUART_BASE3 0x280/* Base address of UART3 */
include/asm-m68k/ptrace.h +1 -1
@@ -43,7 +43,7 @@ struct pt_regs {ulong a4;ulong a5;ulong a6; -#if defined(CONFIG_M5272 ) || defined(CONFIG_M5282 ) || defined(CONFIG_M5249 ) +#if defined(CONFIG_M5272 ) || defined(CONFIG_M5282 ) || defined(CONFIG_M5249 ) || defined(CONFIG_M5271 ) unsigned format : 4; /* frame format specifier */ unsigned vector : 12; /* vector offset */unsigned short sr;
lib_m68k/time.c +7 -2
@@ -27,6 +27,11 @@#include <asm/mcftimer.h> +#ifdef CONFIG_M5271 +#include <asm/m5271.h> +#include <asm/immap_5271.h> +#endif +#ifdef CONFIG_M5272 #include <asm/m5272.h> #include <asm/immap_5272.h>
@@ -43,7 +48,7 @@static ulong timestamp; -#ifdef CONFIG_M5282 +#if defined(CONFIG_M5282 ) || defined(CONFIG_M5271 )static unsigned short lastinc;#endif
@@ -127,7 +132,7 @@ void set_timer (ulong t) }#endif -#if defined(CONFIG_M5282 ) +#if defined(CONFIG_M5282 ) || defined(CONFIG_M5271 )void udelay (unsigned long usec) {
Signature · 4 lines
1.1.3 -- Zachary P. Landau <[email protected]>