Skip to contentSkip to conversation

Running a VDSP compiled code on u-boot

U-Boot-Users Peeyush Prasad 1 participant 1 message Feb 6, 2006 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

hi list,
I have a VDSP compiled standalone code which I am able to successfully
load from the flash of my board and run. Now I wanted to use u-boot as my boot loader and do a 'go <addr> ' to my app;
Currently I get a .ldr file from which, in principal, I can get my binary
code out by stripping the .ldr headers...
I thought it might be simpler to create an application and extract the
binary from the .dxe file created, except the elfdump utility on VDSP, at first look did not seem to allow that.
I could also use bfin-elf-objdump (which I have used successfully for
bfin-elf-gcc compiled apps, except that VDSP puts in a machine type number on which objdump chokes...
How does one go about doing this??
TIA
-- Peeyush