Skip to contentSkip to conversation

various whitespace cleanups

PATCH In review Ladislav Michl 2 participants 2 messages Feb 3, 2006 – Feb 20, 2006

Subsystems (5)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 various whitespace cleanups

Hi,

please use 'let c_space_errors=1' in vim to see what this patch fixes. While there, remove initilizers from variables which are by default initialized to zero (to respect linux policy). No code changes.

arch/arm/mach-omap1/clock.c +1 -1
index 0bc2d7a..619db18 100644
@@ -345,7 +345,7 @@ static unsigned calc_ext_dsor(unsigned l
 	 */
 	for (dsor = 2; dsor < 96; ++dsor) {
 		if ((dsor & 1) && dsor > 8)
-		  	continue;
+			continue;
 		if (rate >= 96000000 / dsor)
 			break;
 	}
arch/arm/mach-omap1/irq.c +9 -9
index ed65a7d..a0431c0 100644
@@ -60,7 +60,7 @@ struct omap_irq_bank {
 	unsigned long wake_enable;
 };
 
-static unsigned int irq_bank_count = 0;
+static unsigned int irq_bank_count;
 static struct omap_irq_bank *irq_banks;
 
 static inline unsigned int irq_bank_readl(int bank, int offset)
@@ -142,28 +142,28 @@ static void omap_irq_set_cfg(int irq, in
 
 #ifdef CONFIG_ARCH_OMAP730
 static struct omap_irq_bank omap730_irq_banks[] = {
-	{ .base_reg = OMAP_IH1_BASE, 		.trigger_map = 0xb3f8e22f },
-	{ .base_reg = OMAP_IH2_BASE, 		.trigger_map = 0xfdb9c1f2 },
+	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3f8e22f },
+	{ .base_reg = OMAP_IH2_BASE,		.trigger_map = 0xfdb9c1f2 },
 	{ .base_reg = OMAP_IH2_BASE + 0x100,	.trigger_map = 0x800040f3 },
 };
 #endif
 
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct omap_irq_bank omap1510_irq_banks[] = {
-	{ .base_reg = OMAP_IH1_BASE, 		.trigger_map = 0xb3febfff },
-	{ .base_reg = OMAP_IH2_BASE, 		.trigger_map = 0xffbfffed },
+	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3febfff },
+	{ .base_reg = OMAP_IH2_BASE,		.trigger_map = 0xffbfffed },
 };
 static struct omap_irq_bank omap310_irq_banks[] = {
-	{ .base_reg = OMAP_IH1_BASE, 		.trigger_map = 0xb3faefc3 },
-	{ .base_reg = OMAP_IH2_BASE, 		.trigger_map = 0x65b3c061 },
+	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3faefc3 },
+	{ .base_reg = OMAP_IH2_BASE,		.trigger_map = 0x65b3c061 },
 };
 #endif
 
 #if defined(CONFIG_ARCH_OMAP16XX)
 
 static struct omap_irq_bank omap1610_irq_banks[] = {
-	{ .base_reg = OMAP_IH1_BASE, 		.trigger_map = 0xb3fefe8f },
-	{ .base_reg = OMAP_IH2_BASE, 		.trigger_map = 0xfdb7c1fd },
+	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3fefe8f },
+	{ .base_reg = OMAP_IH2_BASE,		.trigger_map = 0xfdb7c1fd },
 	{ .base_reg = OMAP_IH2_BASE + 0x100,	.trigger_map = 0xffffb7ff },
 	{ .base_reg = OMAP_IH2_BASE + 0x200,	.trigger_map = 0xffffffff },
 };
arch/arm/mach-omap1/mux.c +3 -3
index 013a2be..10fe0b3 100644
@@ -77,8 +77,8 @@ MUX_CFG("UART3_BCLK",		 A,    0,    0,	 
 MUX_CFG("Y15_1610_UART3_RTS",	 A,    0,    1,	  2,   6,   0,	 NA,	 0,  0)
 
 /* PWT & PWL, conflicts with UART3 */
-MUX_CFG("PWT",		 	 6,    0,    2,	  0,  30,   0,	 NA,	 0,  0)
-MUX_CFG("PWL",		 	 6,    3,    1,	  0,  31,   1,	 NA,	 0,  0)
+MUX_CFG("PWT",			 6,    0,    2,	  0,  30,   0,	 NA,	 0,  0)
+MUX_CFG("PWL",			 6,    3,    1,	  0,  31,   1,	 NA,	 0,  0)
 
 /* USB internal master generic */
 MUX_CFG("R18_USB_VBUS",		 7,    9,    2,	  1,  11,   0,	 NA,	 0,  1)
@@ -155,7 +155,7 @@ MUX_CFG("MCBSP3_CLKX",		 9,    3,    1,	
 
 /* Misc ballouts */
 MUX_CFG("BALLOUT_V8_ARMIO3",	 B,   18,    0,	  2,  25,   1,	 NA,	 0,  1)
-MUX_CFG("N20_HDQ",	       6,   18,    1,   1,   4,   0,    1,     4,  0)
+MUX_CFG("N20_HDQ",		 6,   18,    1,   1,   4,   0,    1,     4,  0)
 
 /* OMAP-1610 MMC2 */
 MUX_CFG("W8_1610_MMC2_DAT0",	 B,   21,    6,	  2,  23,   1,	  2,	 1,  1)
arch/arm/mach-omap1/pm.c +25 -25

85 lines not on this page · raw message

arch/arm/mach-omap1/serial.c +3 -3
index e924e0c..9b4cd69 100644
@@ -30,9 +30,9 @@
 #include <asm/arch/pm.h>
 #endif
 
-static struct clk * uart1_ck = NULL;
-static struct clk * uart2_ck = NULL;
-static struct clk * uart3_ck = NULL;
+static struct clk * uart1_ck;
+static struct clk * uart2_ck;
+static struct clk * uart3_ck;
 
 static inline unsigned int omap_serial_in(struct plat_serial8250_port *up,
 					  int offset)
reviewer
#1 lore raw
Quoted 5 lines · Ladislav Michl

Hi,

please use 'let c_space_errors=1' in vim to see what this patch fixes. While there, remove initilizers from variables which are by default initialized to zero (to respect linux policy). No code changes.

Thanks, pushing today.

Tony