OpenBSD driver for nforce-based ethernetcards.
Hi,
I just read this announcement on a well known OpenBSD forum:
http://undeadly.org/cgi?action=article&sid=20060206150238&mode=expanded
So if anyone is interested in writing a driver for Linux for the nvidia ethernet cards: That's a nice place to start.
The sourcecode can be found over here:
http://www.openbsd.org/cgi-bin/cvsweb/src/sys/dev/pci/
Under the name if_nfe*
# Han
Quoted 5 lines · Han Boetes
Date: Mon, 13 Feb 2006 09:24:56 +0059
From: Han Boetes <[email protected]>
To: [email protected]
Subject: OpenBSD driver for nforce-based ethernetcards.
Quoted 7 lines
Hi,
I just read this announcement on a well known OpenBSD forum:
http://undeadly.org/cgi?action=article&sid=20060206150238&mode=expandedSo if anyone is interested in writing a driver for Linux for the nvidia ethernet cards: That's a nice place to start.
Quick browse of the forum:
Re: testers required for NVIDIA Ethernet driver (mod 2/4)
by Anonymous Coward (IP 208.252.48.163) on Mon Feb 6 21:31:33 2006 (GMT)
How much of this is based on the reverse engineered Linux driver for forcedeth?
Re: testers required for NVIDIA Ethernet driver (mod 11/11) by jsg (IP 210.15.216.215) on Mon Feb 6 22:39:51 2006 (GMT)
It was consulted for register offsets and semantics if we weren't sure what was supposed to happen. If you look at the code you'll see our driver is a hell of a lot easier on the eyes and like half the size.
So yes, perhaps 'forcedeth' driver would use some heavy handed cleanup, but it does not mean it does not exist...
Quoted 5 lines
The sourcecode can be found over here:
http://www.openbsd.org/cgi-bin/cvsweb/src/sys/dev/pci/
Under the name if_nfe*# Han
/Matti Aarnio