Skip to contentSkip to conversation

axnet_cs: support amb8110

PATCH New Jesse Allen 1 participant 1 message Feb 21, 2006 Network drivers

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 axnet_cs: support amb8110

From: Jesse Allen <[email protected]>

The axnet_cs driver can support the AMB8110 PC Card, so add the id for it.

---

In the old pcmcia-cs config file, this card is listed with the comment "not specific enough". The last entry in the axnet_ids has the same comment. They are disabled, and for good reason as it was originally identified by the MANFID, and that is shared with several cards that use both the pcnet_cs driver and axnet_cs driver. I tried my AMB8110 with pcnet_cs, and found that it works fine, and I cannot find a reason for either, except that the old config file recommended axnet_cs.

drivers/net/pcmcia/axnet_cs.c +1 -0
@@ -806,6 +806,7 @@ static struct pcmcia_device_id axnet_ids
 	PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0309),
 	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1106),
 	PCMCIA_DEVICE_MANF_CARD(0x8a01, 0xc1ab),
+	PCMCIA_DEVICE_PROD_ID12("AmbiCom,Inc.", "Fast Ethernet PC Card(AMB8110)", 0x49b020a7, 0x119cc9fc),
 	PCMCIA_DEVICE_PROD_ID124("Fast Ethernet", "16-bit PC Card", "AX88190", 0xb4be14e3, 0x9a12eb6a, 0xab9be5ef),
 	PCMCIA_DEVICE_PROD_ID12("ASIX", "AX88190", 0x0959823b, 0xab9be5ef),
 	PCMCIA_DEVICE_PROD_ID12("Billionton", "LNA-100B", 0x552ab682, 0xbc3b87e1),