Skip to contentSkip to conversation

Rx-buffer overlow

U-Boot-Users Josef Angermeier 1 participant 1 message Feb 28, 2006 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw
Quoted 8 lines
Quoted 7 lines · In message <20060228081735.GA4849@false> you wrote:

=20
fec_recv[249] err: 802
fec_recv[249] err: 2802
fec_recv[249] err: 802
=20
According to the Rx-buffer-status bits, an overlow takes place. So ping just works if there is less network traffic. But why ? - is the receiv=

Quoted 4 lines

e

Quoted 1 line

buffer to small, the CPU to slow ?=20

At which clock frequency are you running your CPU?

the MPC875 is running at 40MHz!

Btw, ethernet just works in 10MB half duplex mode (probably failure in hardware). Maybe this is also related to that problem!

U-Boot 1.1.3 (Feb 28 2006 - 09:27:50)

CPU: MPC885ZPnn at 40 MHz [40.0...50.0 MHz]
8 kB I-Cache 8 kB D-Cache FEC present
You made sure it's an ESM this is running on, right?
DRAM: 64 MB
FLASH: 16 MB
In: serial
Out: serial
Err: serial
Net: FEC ETHERNET

Quoted 2 lines

Best regards,
Wolfgang Denk

Best regards,
Josef