Skip to contentSkip to conversation

usbcore: usb_set_configuration oops (NULL ptr dereference)

PATCH In review Horst Schirmeier 2 participants 2 messages Mar 9, 2006 USB

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 usbcore: usb_set_configuration oops (NULL ptr dereference)

When trying to deconfigure a device via usb_set_configuration(dev, 0), 2.6.16-rc kernels after 55c527187c9d78f840b284d596a0b298bc1493af oops with "Unable to handle NULL pointer dereference at...". This is due to an unchecked dereference of cp in the power budget part.

---

drivers/usb/core/message.c +7 -5
index 7135e54..96cabeb 100644
@@ -1388,11 +1388,13 @@ free_interfaces:
 	if (dev->state != USB_STATE_ADDRESS)
 		usb_disable_device (dev, 1);	// Skip ep0
 
-	i = dev->bus_mA - cp->desc.bMaxPower * 2;
-	if (i < 0)
-		dev_warn(&dev->dev, "new config #%d exceeds power "
-				"limit by %dmA\n",
-				configuration, -i);
+	if (cp) {
+		i = dev->bus_mA - cp->desc.bMaxPower * 2;
+		if (i < 0)
+			dev_warn(&dev->dev, "new config #%d exceeds power "
+					"limit by %dmA\n",
+					configuration, -i);
+	}
 
 	if ((ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 			USB_REQ_SET_CONFIGURATION, 0, configuration, 0,
Acked-by on v1 1/1
#1 lore raw
Quoted 6 lines · Horst Schirmeier

When trying to deconfigure a device via usb_set_configuration(dev, 0), 2.6.16-rc kernels after 55c527187c9d78f840b284d596a0b298bc1493af oops with "Unable to handle NULL pointer dereference at...". This is due to an unchecked dereference of cp in the power budget part.

Quoted 26 lines

---

drivers/usb/core/message.c +7 -5
index 7135e54..96cabeb 100644
@@ -1388,11 +1388,13 @@ free_interfaces:
 	if (dev->state != USB_STATE_ADDRESS)
 		usb_disable_device (dev, 1);	// Skip ep0
 
-	i = dev->bus_mA - cp->desc.bMaxPower * 2;
-	if (i < 0)
-		dev_warn(&dev->dev, "new config #%d exceeds power "
-				"limit by %dmA\n",
-				configuration, -i);
+	if (cp) {
+		i = dev->bus_mA - cp->desc.bMaxPower * 2;
+		if (i < 0)
+			dev_warn(&dev->dev, "new config #%d exceeds power "
+					"limit by %dmA\n",
+					configuration, -i);
+	}
 
 	if ((ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 			USB_REQ_SET_CONFIGURATION, 0, configuration, 0,