Skip to contentSkip to conversation

Router stops routing after changing MAC Address

DISCUSSION Chuck Ebbert 1 participant 1 message Mar 13, 2006

lore
Share & tools
lore
#0 lore raw

In-Reply-To: <925A849792280C4E80C5461017A4B8A20321CC@mail733.InfraSupportEtc.com>

Quoted 10 lines · Greg Scott

How to change MAC addresses is documented well enough - and it works - but when I change MAC addresses, my router stops routing. From the router, I can see the systems on both sides - but the router just refuses to forward packets. Here are my little test scripts to change MAC Addresses.

First - ip-fudge-mac.sh
[root@test-fw2 gregs]# more ip-fudge-mac.sh
ip link set eth0 down
ip link set eth0 address 01:02:03:04:05:06

                            ^

Bit zero is set, so this is a multicast address. Is that intentional?

Quoted 4 lines

ip link set eth0 up

ip link set eth1 down
ip link set eth1 address 17:20:16:01:60:03

                            ^

Ditto.

Quoted 3 lines

ip link set eth1 up

echo "1" > /proc/sys/net/ipv4/ip_forward

Signature · 2 lines
Chuck
"Penguins don't come from next door, they come from the Antarctic!"