2.6.16 - cpufreq doesn't find Celeron (Pentium4/XEON) processor
Hi,
up to 2.6.15 my kernel worked to find my processor and frequency scalling was possible via cpufreq. I have
processor : 0vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Celeron(R) CPU 2.40GHz
stepping : 9
cpu MHz : 2398.803
cache size : 128 KBfdiv_bug : nohlt_bug : nof00f_bug : nocoma_bug : no
fpu : yesfpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xtpr
bogomips : 4801.41
Now it is screwed up...
My config:
│ │ [*] CPU Frequency scaling │ │ │ │ [ ] Enable CPUfreq debugging │ │ │ │ <*> CPU frequency translation statistics │ │ │ │ [*] CPU frequency translation statistics details │ │ │ │ Default CPUFreq governor (userspace) ---> │ │ │ │ <*> 'performance' governor │ │ │ │ <*> 'powersave' governor │ │ │ │ --- 'userspace' governor for userspace frequency scaling │ │ │ │ <*> 'ondemand' cpufreq policy governor │ │ │ │ <*> 'conservative' cpufreq governor │ │ │ │ --- CPUFreq processor drivers │ │ │ │ < > ACPI Processor P-States driver │ │ │ │ < > AMD Mobile K6-2/K6-3 PowerNow! │ │ │ │ < > AMD Mobile Athlon/Duron PowerNow! │ │ │ │ < > AMD Opteron/Athlon64 PowerNow! │ │ │ │ < > Cyrix MediaGX/NatSemi Geode Suspend Modulation │ │ │ │ < > Intel Enhanced SpeedStep │ │ │ │ < > Intel Speedstep on ICH-M chipsets (ioport interface) │ │ │ │ < > Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface) │ │ │ │ <*> Intel Pentium 4 clock modulation │ │ │ │ < > nVidia nForce2 FSB changing │ │ │ │ < > Transmeta LongRun │ │ │ │ < > VIA Cyrix III Longhaul │ │ │ │ --- shared options │ │
Thanks for fixing
Michal
Quoted 4 lines · CIJOML
Hi,
up to 2.6.15 my kernel worked to find my processor and frequency scalling was possible via cpufreq. I have
are you sure it was frequency scaling and not throttling? I thought real frequency scaling was only available on non-Celeron processors..... (and throttling isn't all that great for power save)
Hi,
I am totally sure. It was cpufreq via normal P4/XEON - trottling doesn't work for me:
notas:/usr/src/linux-2.6.16# cat /proc/acpi/processor/CPU0/throttling <not supported>
Michal
Dne út 21. března 2006 10:04 jste napsal(a):
Quoted 9 lines · CIJOML
Quoted 4 lines
Hi,
up to 2.6.15 my kernel worked to find my processor and frequency scalling was possible via cpufreq. I have
are you sure it was frequency scaling and not throttling? I thought real frequency scaling was only available on non-Celeron processors..... (and throttling isn't all that great for power save)
Hi Arjan,
here you can see my laptop configured by anyone else which also has cpufreq enabled and working:
http://www.freewebs.com/duckzland/t240.html
Michal
Dne út 21. března 2006 10:04 jste napsal(a):
Quoted 9 lines · CIJOML
Quoted 4 lines
Hi,
up to 2.6.15 my kernel worked to find my processor and frequency scalling was possible via cpufreq. I have
are you sure it was frequency scaling and not throttling? I thought real frequency scaling was only available on non-Celeron processors..... (and throttling isn't all that great for power save)
Quoted 1 line · CIJOML
...is using p4-clockmod which is basically useless for power saving It does the same as throttling IIUC.
Signature · 3 lines
Stefan Seyfried \ "I didn't want to write for pay. I QA / R&D Team Mobile Devices \ wanted to be paid for what I write." SUSE LINUX Products GmbH, Nürnberg \ -- Leonard Cohen
Hi Stefan,
yes, it is clockmod, but problem is, that my laptop doesn't support throttling, so this is only chance for me to do scaling...
cat /proc/acpi/processor/CPU0/throttling
<not supported>
Regards
Michal
Dne pá 24. března 2006 09:23 Stefan Seyfried napsal(a):
Quoted 5 lines · CIJOML
Quoted 1 line
...is using p4-clockmod which is basically useless for power saving It does the same as throttling IIUC.