Skip to contentSkip to conversation

2.6.16.1 Stable review

PATCH In review Greg KH 2 participants 23 messages Mar 25, 2006

Subsystems (16)
lore
Share & tools
lore

Greg KH

author
#0 lore raw

cover 2.6.16.1 Stable review

This is the start of the stable review cycle for the 2.6.16.1 release. There are 20 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let us know. If anyone is a maintainer of the proper subsystem, and wants to add a signed-off-by: line to the patch, please respond with it.

These patches are sent out with a number of different people on the Cc:
line. If you wish to be a reviewer, please email [email protected] to add your name to the list. If you want to be off the reviewer list, also email us.

Responses should be made by Tuesday March 28 02:00:00 UTC. Anything received after that time, might be too late.

thanks,

the -stable release team

author
#1 lore raw

PATCH 1/20 sata_mv: fix irq port status usage

-stable review patch. If anyone has any objections, please let us know.

------------------
From: Jeff Garzik <[email protected]>

Interrupt handler did not properly initialize a variable on a per-port basis, leading to incorrect behavior on ports other than port 0.

Bug caught and fixed by Mark Lord.

---

 drivers/scsi/sata_mv.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/sata_mv.c +1 -1
@@ -1192,7 +1192,6 @@ static void mv_host_intr(struct ata_host
 	u32 hc_irq_cause;
 	int shift, port, port0, hard_port, handled;
 	unsigned int err_mask;
-	u8 ata_status = 0;
 
 	if (hc == 0) {
 		port0 = 0;
@@ -1210,6 +1209,7 @@ static void mv_host_intr(struct ata_host
 		hc,relevant,hc_irq_cause);
 
 	for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) {
+		u8 ata_status = 0;
 		ap = host_set->ports[port];
 		hard_port = port & MV_PORT_MASK;	/* range 0-3 */
 		handled = 0;	/* ensure ata_status is set if handled++ */

--

author
#2 lore raw

PATCH 2/20 V4L/DVB (3324): Fix Samsung tuner frequency ranges

In reply to Greg KH

-stable review patch. If anyone has any objections, please let us know.

------------------
From: Hans Verkuil <[email protected]>

Forgot to take the NTSC frequency offset into account.

---

 drivers/media/video/tuner-types.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/media/video/tuner-types.c +2 -2
@@ -1087,8 +1087,8 @@ static struct tuner_params tuner_tnf_533
 /* ------------ TUNER_SAMSUNG_TCPN_2121P30A - Samsung NTSC ------------ */
 
 static struct tuner_range tuner_samsung_tcpn_2121p30a_ntsc_ranges[] = {
-	{ 16 * 175.75 /*MHz*/, 0x01, },
-	{ 16 * 410.25 /*MHz*/, 0x02, },
+	{ 16 * 130.00 /*MHz*/, 0x01, },
+	{ 16 * 364.50 /*MHz*/, 0x02, },
 	{ 16 * 999.99        , 0x08, },
 };
 

--

author
#5 lore raw

PATCH 4/20 2.6.xx: sata_mv: another critical fix

In reply to Greg KH

-stable review patch. If anyone has any objections, please let us know.

------------------

From: Mark Lord <[email protected]>

This patch addresses a number of weird behaviours observed for the sata_mv driver, by fixing an "off by one" bug in processing of the EDMA response queue.

Basically, sata_mv was looking in the wrong place for command results, and this produced a lot of unpredictable behaviour.

---

 drivers/scsi/sata_mv.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/scsi/sata_mv.c +4 -1
@@ -1102,6 +1102,7 @@ static u8 mv_get_crpb_status(struct ata_
 	void __iomem *port_mmio = mv_ap_base(ap);
 	struct mv_port_priv *pp = ap->private_data;
 	u32 out_ptr;
+	u8 ata_status;
 
 	out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
 
@@ -1109,6 +1110,8 @@ static u8 mv_get_crpb_status(struct ata_
 	assert(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
 	       pp->rsp_consumer);
 
+	ata_status = pp->crpb[pp->rsp_consumer].flags >> CRPB_FLAG_STATUS_SHIFT;
+
 	/* increment our consumer index... */
 	pp->rsp_consumer = mv_inc_q_index(&pp->rsp_consumer);
 
@@ -1123,7 +1126,7 @@ static u8 mv_get_crpb_status(struct ata_
 	writelfl(out_ptr, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
 
 	/* Return ATA status register for completed CRPB */
-	return (pp->crpb[pp->rsp_consumer].flags >> CRPB_FLAG_STATUS_SHIFT);
+	return ata_status;
 }
 
 /**

--

author
#6 lore raw

PATCH 5/20 TCP: Do not use inet->id of global tcp_socket when sending RST (CVE-2006-1242)

In reply to Greg KH

-stable review patch. If anyone has any objections, please let us know.

------------------
From: Alexey Kuznetsov <[email protected]>

The problem is in ip_push_pending_frames(), which uses:

        if (!df) {
                __ip_select_ident(iph, &rt->u.dst, 0);
        } else {
                iph->id = htons(inet->id++);
        }

instead of ip_select_ident().

Right now I think the code is a nonsense. Most likely, I copied it from old ip_build_xmit(), where it was really special, we had to decide whether to generate unique ID when generating the first (well, the last) fragment.

In ip_push_pending_frames() it does not make sense, it should use plain ip_select_ident() instead.

---

 net/ipv4/ip_output.c |    6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)
net/ipv4/ip_output.c +1 -5
@@ -1249,11 +1249,7 @@ int ip_push_pending_frames(struct sock *
 	iph->tos = inet->tos;
 	iph->tot_len = htons(skb->len);
 	iph->frag_off = df;
-	if (!df) {
-		__ip_select_ident(iph, &rt->u.dst, 0);
-	} else {
-		iph->id = htons(inet->id++);
-	}
+	ip_select_ident(iph, &rt->u.dst, sk);
 	iph->ttl = ttl;
 	iph->protocol = sk->sk_protocol;
 	iph->saddr = rt->rt_src;

--

author
#3 lore raw

PATCH 3/20 Kconfig: VIDEO_DECODER must select FW_LOADER

In reply to Greg KH

-stable review patch. If anyone has any objections, please let us know.

------------------
From: Michael Krufky <[email protected]>

The cx25840 module requires external firmware in order to function, so it must select FW_LOADER, but saa7115 and saa7129 do not require it.

---

 drivers/media/video/Kconfig |    1 +
 1 file changed, 1 insertion(+)
drivers/media/video/Kconfig +1 -0
@@ -349,6 +349,7 @@ config VIDEO_AUDIO_DECODER
 config VIDEO_DECODER
 	tristate "Add support for additional video chipsets"
 	depends on VIDEO_DEV && I2C && EXPERIMENTAL
+	select FW_LOADER
 	---help---
 	  Say Y here to compile drivers for SAA7115, SAA7127 and CX25840
 	  video decoders.

--

author
#7 lore raw

PATCH 6/20 sysfs: sysfs_remove_dir() needs to invalidate the dentry

In reply to Greg KH

-stable review patch. If anyone has any objections, please let us know.

------------------
When calling sysfs_remove_dir() don't allow any further sysfs functions to work for this kobject anymore. This fixes a nasty USB cdc-acm oops on disconnect.

Many thanks to Bob Copeland and Paul Fulghum for taking the time to track this down.

Cc Bob Copeland <[email protected]>
Cc Paul Fulghum <[email protected]>
Cc Maneesh Soni <[email protected]>

---

 fs/sysfs/dir.c   |    1 +
 fs/sysfs/inode.c |    6 +++++-
 2 files changed, 6 insertions(+), 1 deletion(-)

641e6f30a095f3752ed84fd9d279382f5d3ef4c1

fs/sysfs/dir.c +1 -0
@@ -302,6 +302,7 @@ void sysfs_remove_dir(struct kobject * k
 	 * Drop reference from dget() on entrance.
 	 */
 	dput(dentry);
+	kobj->dentry = NULL;
 }
 
 int sysfs_rename_dir(struct kobject * kobj, const char *new_name)
fs/sysfs/inode.c +5 -1
@@ -227,12 +227,16 @@ void sysfs_drop_dentry(struct sysfs_dire
 void sysfs_hash_and_remove(struct dentry * dir, const char * name)
 {
 	struct sysfs_dirent * sd;
-	struct sysfs_dirent * parent_sd = dir->d_fsdata;
+	struct sysfs_dirent * parent_sd;
+
+	if (!dir)
+		return;
 
 	if (dir->d_inode == NULL)
 		/* no inode means this hasn't been made visible yet */
 		return;
 
+	parent_sd = dir->d_fsdata;
 	mutex_lock(&dir->d_inode->i_mutex);
 	list_for_each_entry(sd, &parent_sd->s_children, s_sibling) {
 		if (!sd->s_element)

--

author
#13 lore raw

PATCH 12/20 i810fb_cursor(): use GFP_ATOMIC

In reply to Greg KH

-stable review patch. If anyone has any objections, please let us know.

------------------
From: "Antonino A. Daplas" <[email protected]>

The console cursor can be called in atomic context. Change memory allocation to use the GFP_ATOMIC flag in i810fb_cursor().

---

 drivers/video/i810/i810_main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/video/i810/i810_main.c +1 -1
@@ -1508,7 +1508,7 @@ static int i810fb_cursor(struct fb_info 
 		int size = ((cursor->image.width + 7) >> 3) *
 			cursor->image.height;
 		int i;
-		u8 *data = kmalloc(64 * 8, GFP_KERNEL);
+		u8 *data = kmalloc(64 * 8, GFP_ATOMIC);
 
 		if (data == NULL)
 			return -ENOMEM;

--

author
#8 lore raw

PATCH 7/20 firmware: fix BUG: in fw_realloc_buffer

In reply to Greg KH

-stable review patch. If anyone has any objections, please let us know.

------------------
The fw_realloc_buffer routine does not handle an increase in buffer size of more than 4k. It's not clear to me why it expects that it will only get an extra 4k of data. The attached patch modifies fw_realloc_buffer to vmalloc as much memory as is requested, instead of what we previously had + 4k.

I've tested this on my laptop, which would crash occaisionally on boot without the patch. With the patch, it hasn't crashed, but I can't be certain that this code path is exercised.

---

 drivers/base/firmware_class.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

30560ba6eda308c13a361d08eb5d4eaab94ab37e

drivers/base/firmware_class.c +4 -2
@@ -211,18 +211,20 @@ static int
 fw_realloc_buffer(struct firmware_priv *fw_priv, int min_size)
 {
 	u8 *new_data;
+	int new_size = fw_priv->alloc_size;
 
 	if (min_size <= fw_priv->alloc_size)
 		return 0;
 
-	new_data = vmalloc(fw_priv->alloc_size + PAGE_SIZE);
+	new_size = ALIGN(min_size, PAGE_SIZE);
+	new_data = vmalloc(new_size);
 	if (!new_data) {
 		printk(KERN_ERR "%s: unable to alloc buffer\n", __FUNCTION__);
 		/* Make sure that we don't keep incomplete data */
 		fw_load_abort(fw_priv);
 		return -ENOMEM;
 	}
-	fw_priv->alloc_size += PAGE_SIZE;
+	fw_priv->alloc_size = new_size;
 	if (fw_priv->fw->data) {
 		memcpy(new_data, fw_priv->fw->data, fw_priv->fw->size);
 		vfree(fw_priv->fw->data);

--

author
#9 lore raw

PATCH 8/20 get_cpu_sysdev() signedness fix

In reply to Greg KH

-stable review patch. If anyone has any objections, please let us know.

------------------
Doing (int < NR_CPUS) doesn't dtrt if it's negative..

---

 drivers/base/cpu.c  |    2 +-
 include/linux/cpu.h |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

a29d642a4aa99c5234314ab2523281139226c231

drivers/base/cpu.c +1 -1
@@ -141,7 +141,7 @@ int __devinit register_cpu(struct cpu *c
 	return error;
 }
 
-struct sys_device *get_cpu_sysdev(int cpu)
+struct sys_device *get_cpu_sysdev(unsigned cpu)
 {
 	if (cpu < NR_CPUS)
 		return cpu_sys_devices[cpu];
include/linux/cpu.h +1 -1
@@ -32,7 +32,7 @@ struct cpu {
 };
 
 extern int register_cpu(struct cpu *, int, struct node *);
-extern struct sys_device *get_cpu_sysdev(int cpu);
+extern struct sys_device *get_cpu_sysdev(unsigned cpu);
 #ifdef CONFIG_HOTPLUG_CPU
 extern void unregister_cpu(struct cpu *, struct node *);
 #endif

--

author
#20 lore raw

PATCH 19/20 cciss: fix use-after-free in cciss_init_one

In reply to Greg KH

-stable review patch. If anyone has any objections, please let us know.

------------------
From: Patrick McHardy <[email protected]>

free_hba() sets hba[i] to NULL, the dereference afterwards results in this crash. Setting busy_initializing to 0 actually looks unnecessary, but I'm not entirely sure, which is why I left it in.

cciss: controller appears to be disabled

Unable to handle kernel NULL pointer dereference at virtual address 00000370
 printing eip:
c1114d53
*pde = 00000000
Oops: 0002 [#1]
Modules linked in:
CPU:    0
EIP:    0060:[<c1114d53>]    Not tainted VLI
EFLAGS: 00010286   (2.6.16 #1)

EIP is at cciss_init_one+0x4e9/0x4fe
eax: 00000000 ebx: c132cd60 ecx: c13154e4 edx: c27d3c00
esi: 00000000 edi: c2748800 ebp: c2536ee4 esp: c2536eb8
ds: 007b es: 007b ss: 0068
Process swapper (pid: 1, threadinfo=c2536000 task=c2535a30)

Stack: <0>00000000 00000000 00000000 c13fdba0 c2536ee8 c13159c0 c2536f38
f7c74740
       c132cd60 c132cd60 ffffffed c2536ef0 c10c1d51 c2748800 c2536f04
c10c1d85
       c132cd60 c2748800 c132cd8c c2536f14 c10c1db8 c2748848 00000000
c2536f28
Call Trace:
 [<c10031d5>] show_stack_log_lvl+0xa8/0xb0
 [<c1003305>] show_registers+0x102/0x16a
 [<c10034a2>] die+0xc1/0x13c
 [<c1288160>] do_page_fault+0x38a/0x525
 [<c1002e9b>] error_code+0x4f/0x54
 [<c10c1d51>] pci_call_probe+0xd/0x10
 [<c10c1d85>] __pci_device_probe+0x31/0x43
 [<c10c1db8>] pci_device_probe+0x21/0x34
 [<c110a654>] driver_probe_device+0x44/0x99
 [<c110a73f>] __driver_attach+0x39/0x5d
 [<c1109e1c>] bus_for_each_dev+0x35/0x5a
 [<c110a777>] driver_attach+0x14/0x16
 [<c110a220>] bus_add_driver+0x5c/0x8f
 [<c110ab22>] driver_register+0x73/0x78
 [<c10c1f6d>] __pci_register_driver+0x5f/0x71
 [<c13bf935>] cciss_init+0x1a/0x1c
 [<c13aa718>] do_initcalls+0x4c/0x96
 [<c13aa77e>] do_basic_setup+0x1c/0x1e
 [<c10002b1>] init+0x35/0x118
 [<c1000cf5>] kernel_thread_helper+0x5/0xb
Code: 04 b5 e0 de 40 c1 8d 50 04 8b 40 34 e8 3f b7 f9 ff 8b 04 b5 e0 de

40 c1 e8 aa f3 ff ff 89 f0 e8 e8 fa ff ff 8b 04 b5 e0 de 40 c1 <c7> 80 70 03 00 00 00 00 00 00 83 c8 ff 8d 65 f4 5b 5e 5f 5d c3
<0>Kernel panic - not syncing: Attempted to kill init!

---

 drivers/block/cciss.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/block/cciss.c +1 -1
@@ -3269,8 +3269,8 @@ clean2:
 	unregister_blkdev(hba[i]->major, hba[i]->devname);
 clean1:
 	release_io_mem(hba[i]);
-	free_hba(i);
 	hba[i]->busy_initializing = 0;
+	free_hba(i);
 	return(-1);
 }
 

--

author
#21 lore raw

PATCH 20/20 DMI: fix DMI onboard device discovery

In reply to Greg KH

-stable review patch. If anyone has any objections, please let us know.

------------------
From: Andrey Panin <[email protected]>

Attached patch fixes invalid pointer arithmetic in DMI code to make onboard device discovery working again.

akpm: bug has been present since dmi_find_device() was added in 2.6.14. Affects ipmi only (I think) - the symptoms weren't described.

akpm: changed to use pointer arithmetic rather than open-coded sizeof.

---

 arch/i386/kernel/dmi_scan.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/i386/kernel/dmi_scan.c +1 -1
@@ -106,7 +106,7 @@ static void __init dmi_save_devices(stru
 	struct dmi_device *dev;
 
 	for (i = 0; i < count; i++) {
-		char *d = ((char *) dm) + (i * 2);
+		char *d = (char *)(dm + 1) + (i * 2);
 
 		/* Skip disabled device */
 		if ((*d & 0x80) == 0)

--

author
#16 lore raw

PATCH 15/20 rtc.h broke strace(1) builds

In reply to Greg KH

-stable review patch. If anyone has any objections, please let us know.

------------------
From: Joe Korty <[email protected]>

Git patch 52dfa9a64cfb3dd01fa1ee1150d589481e54e28e

[PATCH] move rtc_interrupt() prototype to rtc.h

broke strace(1) builds. The below moves the kernel-only additions lower, under the already provided #ifdef __KERNEL__ statement.

---

 include/linux/rtc.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
include/linux/rtc.h +2 -2
@@ -11,8 +11,6 @@
 #ifndef _LINUX_RTC_H_
 #define _LINUX_RTC_H_
 
-#include <linux/interrupt.h>
-
 /*
  * The struct used to pass data via the following ioctl. Similar to the
  * struct tm in <time.h>, but it needs to be here so that the kernel 
@@ -95,6 +93,8 @@ struct rtc_pll_info {
 
 #ifdef __KERNEL__
 
+#include <linux/interrupt.h>
+
 typedef struct rtc_task {
 	void (*func)(void *private_data);
 	void *private_data;

--

author
#17 lore raw

PATCH 16/20 proc: fix duplicate line in /proc/devices

In reply to Greg KH

-stable review patch. If anyone has any objections, please let us know.

------------------
From: Neil Horman <[email protected]>

Fix a duplicate block device line printed after the "Block device" header in /proc/devices.

---

 fs/proc/proc_misc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/proc/proc_misc.c +1 -1
@@ -312,7 +312,7 @@ static void *devinfo_next(struct seq_fil
 		case BLK_HDR:
 			info->state = BLK_LIST;
 			(*pos)++;
-			break;
+			/*fallthrough*/
 		case BLK_LIST:
 			if (get_blkdev_info(info->blkdev,&idummy,&ndummy)) {
 				/*

--

author
#18 lore raw

PATCH 17/20 fix scheduler deadlock

In reply to Greg KH

-stable review patch. If anyone has any objections, please let us know.

------------------
From: Anton Blanchard <[email protected]>

We have noticed lockups during boot when stress testing kexec on ppc64. Two cpus would deadlock in scheduler code trying to grab already taken spinlocks.

The double_rq_lock code uses the address of the runqueue to order the taking of multiple locks. This address is a per cpu variable:

	if (rq1 < rq2) {
		spin_lock(&rq1->lock);
		spin_lock(&rq2->lock);
	} else {
		spin_lock(&rq2->lock);
		spin_lock(&rq1->lock);
	}

On the other hand, the code in wake_sleeping_dependent uses the cpu id order to grab locks:

	for_each_cpu_mask(i, sibling_map)
		spin_lock(&cpu_rq(i)->lock);

This means we rely on the address of per cpu data increasing as cpu ids increase. While this will be true for the generic percpu implementation it may not be true for arch specific implementations.

One way to solve this is to always take runqueues in cpu id order. To do this we add a cpu variable to the runqueue and check it in the double runqueue locking functions.

---

 kernel/sched.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
kernel/sched.c +7 -2
@@ -237,6 +237,7 @@ struct runqueue {
 
 	task_t *migration_thread;
 	struct list_head migration_queue;
+	int cpu;
 #endif
 
 #ifdef CONFIG_SCHEDSTATS
@@ -1660,6 +1661,9 @@ unsigned long nr_iowait(void)
 /*
  * double_rq_lock - safely lock two runqueues
  *
+ * We must take them in cpu order to match code in
+ * dependent_sleeper and wake_dependent_sleeper.
+ *
  * Note this does not disable interrupts like task_rq_lock,
  * you need to do so manually before calling.
  */
@@ -1671,7 +1675,7 @@ static void double_rq_lock(runqueue_t *r
 		spin_lock(&rq1->lock);
 		__acquire(rq2->lock);	/* Fake it out ;) */
 	} else {
-		if (rq1 < rq2) {
+		if (rq1->cpu < rq2->cpu) {
 			spin_lock(&rq1->lock);
 			spin_lock(&rq2->lock);
 		} else {
@@ -1707,7 +1711,7 @@ static void double_lock_balance(runqueue
 	__acquires(this_rq->lock)
 {
 	if (unlikely(!spin_trylock(&busiest->lock))) {
-		if (busiest < this_rq) {
+		if (busiest->cpu < this_rq->cpu) {
 			spin_unlock(&this_rq->lock);
 			spin_lock(&busiest->lock);
 			spin_lock(&this_rq->lock);
@@ -6035,6 +6039,7 @@ void __init sched_init(void)
 		rq->push_cpu = 0;
 		rq->migration_thread = NULL;
 		INIT_LIST_HEAD(&rq->migration_queue);
+		rq->cpu = i;
 #endif
 		atomic_set(&rq->nr_iowait, 0);
 

--

author
#19 lore raw

PATCH 18/20 DM: Fix bug: BIO_RW_BARRIER requests to md/raid1 hang.

In reply to Greg KH

-stable review patch. If anyone has any objections, please let us know.

------------------
From: Neil Brown <[email protected]>

Both R1BIO_Barrier and R1BIO_Returned are 4 !!!!

This means that barrier requests don't get returned (i.e. b_endio called) because it looks like they already have been.

---

 include/linux/raid/raid1.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/linux/raid/raid1.h +1 -1
@@ -130,6 +130,6 @@ struct r1bio_s {
  * with failure when last write completes (and all failed).
  * Record that bi_end_io was called with this flag...
  */
-#define	R1BIO_Returned 4
+#define	R1BIO_Returned 6
 
 #endif

--

author
#14 lore raw

PATCH 13/20 v9fs: assign dentry ops to negative dentries

In reply to Greg KH

table review patch. If anyone has any objections, please let us know.

------------------

From: Latchesar Ionkov <[email protected]>

If a file is not found in v9fs_vfs_lookup, the function creates negative dentry, but doesn't assign any dentry ops. This leaves the negative entry in the cache (there is no d_delete to mark it for removal). If the file is created outside of the mounted v9fs filesystem, the file shows up in the directory with weird permissions.

This patch assigns the default v9fs dentry ops to the negative dentry.

---

 fs/9p/vfs_inode.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
fs/9p/vfs_inode.c +1 -2
@@ -614,6 +614,7 @@ static struct dentry *v9fs_vfs_lookup(st
 
 	sb = dir->i_sb;
 	v9ses = v9fs_inode2v9ses(dir);
+	dentry->d_op = &v9fs_dentry_operations;
 	dirfid = v9fs_fid_lookup(dentry->d_parent);
 
 	if (!dirfid) {
@@ -681,8 +682,6 @@ static struct dentry *v9fs_vfs_lookup(st
 		goto FreeFcall;
 
 	fid->qid = fcall->params.rstat.stat.qid;
-
-	dentry->d_op = &v9fs_dentry_operations;
 	v9fs_stat2inode(&fcall->params.rstat.stat, inode, inode->i_sb);
 
 	d_add(dentry, inode);

--

author
#15 lore raw

PATCH 14/20 dm: bio split bvec fix

In reply to Greg KH

-stable review patch. If anyone has any objections, please let us know.

------------------
From: Alasdair G Kergon <[email protected]>

The code that handles bios that span table target boundaries by breaking them up into smaller bios will not split an individual struct bio_vec into more than two pieces. Sometimes more than that are required.

This patch adds a loop to break the second piece up into as many pieces as are necessary.

---

 drivers/md/dm.c |   45 +++++++++++++++++++++++++--------------------
 1 file changed, 25 insertions(+), 20 deletions(-)
drivers/md/dm.c +25 -20
@@ -533,30 +533,35 @@ static void __clone_and_map(struct clone
 
 	} else {
 		/*
-		 * Create two copy bios to deal with io that has
-		 * been split across a target.
+		 * Handle a bvec that must be split between two or more targets.
 		 */
 		struct bio_vec *bv = bio->bi_io_vec + ci->idx;
+		sector_t remaining = to_sector(bv->bv_len);
+		unsigned int offset = 0;
 
-		clone = split_bvec(bio, ci->sector, ci->idx,
-				   bv->bv_offset, max);
-		__map_bio(ti, clone, tio);
-
-		ci->sector += max;
-		ci->sector_count -= max;
-		ti = dm_table_find_target(ci->map, ci->sector);
-
-		len = to_sector(bv->bv_len) - max;
-		clone = split_bvec(bio, ci->sector, ci->idx,
-				   bv->bv_offset + to_bytes(max), len);
-		tio = alloc_tio(ci->md);
-		tio->io = ci->io;
-		tio->ti = ti;
-		memset(&tio->info, 0, sizeof(tio->info));
-		__map_bio(ti, clone, tio);
+		do {
+			if (offset) {
+				ti = dm_table_find_target(ci->map, ci->sector);
+				max = max_io_len(ci->md, ci->sector, ti);
+
+				tio = alloc_tio(ci->md);
+				tio->io = ci->io;
+				tio->ti = ti;
+				memset(&tio->info, 0, sizeof(tio->info));
+			}
+
+			len = min(remaining, max);
+
+			clone = split_bvec(bio, ci->sector, ci->idx,
+					   bv->bv_offset + offset, len);
+
+			__map_bio(ti, clone, tio);
+
+			ci->sector += len;
+			ci->sector_count -= len;
+			offset += to_bytes(len);
+		} while (remaining -= len);
 
-		ci->sector += len;
-		ci->sector_count -= len;
 		ci->idx++;
 	}
 }

--

author
#10 lore raw

PATCH 9/20 sysfs: fix a kobject leak in sysfs_add_link on the error path

In reply to Greg KH

-stable review patch. If anyone has any objections, please let us know.

------------------
As pointed out by Oliver Neukum.

Cc Maneesh Soni <[email protected]>
Cc Oliver Neukum <[email protected]>

---

 fs/sysfs/symlink.c |    1 +
 1 file changed, 1 insertion(+)

b3229087c5e08589cea4f5040dab56f7dc11332a

fs/sysfs/symlink.c +1 -0
@@ -66,6 +66,7 @@ static int sysfs_add_link(struct dentry 
 	if (!error)
 		return 0;
 
+	kobject_put(target);
 	kfree(sl->link_name);
 exit2:
 	kfree(sl);

--

author
#11 lore raw

PATCH 10/20 XFS writeout fix

In reply to Greg KH

-stable review patch. If anyone has any objections, please let us know.

------------------
[XFS] Check that a page has dirty buffers before finding it acceptable for rewrite clustering. This prevents writing excessive amounts of clean data when doing random rewrites of a cached file.

---

 fs/xfs/linux-2.6/xfs_aops.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/xfs/linux-2.6/xfs_aops.c +1 -1
@@ -616,7 +616,7 @@ xfs_is_delayed_page(
 				acceptable = (type == IOMAP_UNWRITTEN);
 			else if (buffer_delay(bh))
 				acceptable = (type == IOMAP_DELAY);
-			else if (buffer_mapped(bh))
+			else if (buffer_dirty(bh) && buffer_mapped(bh))
 				acceptable = (type == 0);
 			else
 				break;

--

author
#12 lore raw

PATCH 11/20 NET: Ensure device name passed to SO_BINDTODEVICE is NULL terminated.

In reply to Greg KH

-stable review patch. If anyone has any objections, please let us know.

------------------
The user can pass us arbitrary garbage so we should ensure the string they give us is null terminated before we pass it on to dev_get_by_index() et al.

Found by Solar Designer.

---

 net/core/sock.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
net/core/sock.c +3 -2
@@ -404,8 +404,9 @@ set_rcvbuf:
 			if (!valbool) {
 				sk->sk_bound_dev_if = 0;
 			} else {
-				if (optlen > IFNAMSIZ) 
-					optlen = IFNAMSIZ; 
+				if (optlen > IFNAMSIZ - 1)
+					optlen = IFNAMSIZ - 1;
+				memset(devname, 0, sizeof(devname));
 				if (copy_from_user(devname, optval, optlen)) {
 					ret = -EFAULT;
 					break;

--

author
#22 lore raw

[patch 21/20] Fix speedstep-smi assembly bug in speedstep_smi_ownership

In reply to Greg KH

One more last minute patch...

-stable review patch. If anyone has any objections, please let us know.

------------------

From: Andrew Morton <[email protected]>

Fix bug identified by Linus Torvalds <[email protected]>: the `out' instruction depends upon the state of memory_data[], so we need to tell gcc that before executing it. (The opcode, not gcc).

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=5553

Thanks to Antonio Ospite <[email protected]> for testing.

---

 arch/i386/kernel/cpu/cpufreq/speedstep-smi.c |    4 +++-
 1 files changed, 3 insertions(+), 1 deletion(-)
arch/i386/kernel/cpu/cpufreq/speedstep-smi.c renamed from arch/i386/kernel/cpu/cpufreq/speedstep-smi.c~cpufreq-speedstep-smi-asm-fix +3 -1
diff -puN arch/i386/kernel/cpu/cpufreq/speedstep-smi.c~cpufreq-speedstep-smi-asm-fix arch/i386/kernel/cpu/cpufreq/speedstep-smi.c
@@ -75,7 +75,9 @@ static int speedstep_smi_ownership (void
 	__asm__ __volatile__(
 		"out %%al, (%%dx)\n"
 		: "=D" (result)
-		: "a" (command), "b" (function), "c" (0), "d" (smi_port), "D" (0), "S" (magic)
+		: "a" (command), "b" (function), "c" (0), "d" (smi_port),
+			"D" (0), "S" (magic)
+		: "memory"
 	);
 
 	dprintk("result is %x\n", result);

_

Acked-by on v1 3/20
#4 lore raw

Re: [patch 03/20] Kconfig: VIDEO_DECODER must select FW_LOADER

In reply to Greg KH

Em Sex, 2006-03-24 às 20:26 -0800, Greg KH escreveu:

Quoted 7 lines

anexo Documento somente texto (kconfig-video_decoder-must-select-fw_loader.patch)
-stable review patch. If anyone has any objections, please let us know.

------------------
From: Michael Krufky <[email protected]>

Quoted 7 lines

The cx25840 module requires external firmware in order to function, so it must select FW_LOADER, but saa7115 and saa7129 do not require it.

Cheers,
Mauro.