Skip to contentSkip to conversation

Linux-omap-open-source Digest, Vol 23, Issue 61

DISCUSSION Amit kumar sharma 1 participant 1 message Mar 31, 2006 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

Hi All

I am using montavista linux on omap 5912 ,i am using memcpy for data transfer.i have one question if during data transfer through memcpy external interrupt or any other higher priority DMA channel interrupt comes ,How driver can manage data corruption ,My device connected in memcpy processing is configured with 16 bit bus and other device is 32 bit.

thanks
Amit

[email protected] wrote:
Send Linux-omap-open-source mailing list submissions to
[email protected]

To subscribe or unsubscribe via the World Wide Web, visit
http://linux.omap.com/mailman/listinfo/linux-omap-open-source
or, via email, send a message with subject or body 'help' to [email protected]

You can reach the person managing the list at
[email protected]

When replying, please edit your Subject line so it is more specific than "Re: Contents of Linux-omap-open-source digest..."

Today's Topics:

1. Re: [PATCH] Fix USB host on 1510/5910? (Jonathan McDowell)
2. palmte lcd warnings (Komal Shah)
3. Re: [PATCH] fix MMC response types (Carlos Aguiar)
4. Re: palmte lcd warnings (andrzej zaborowski)
5. About dct4x4 transform on 55x dsp,who can provide a good way? (=?gb2312?B?zfWxprHy?=)
6. Stack pointer register accesing problem with monta- vista linux 2.4 on OMAP 730 (chandrashekhar singh)

----------------------------------------------------------------------

Message: 1
Date: Tue, 28 Mar 2006 20:05:19 +0100
From: Jonathan McDowell
Subject: Re: [PATCH] Fix USB host on 1510/5910?
To: [email protected]
Message-ID: <[email protected]>
Content-Type: text/plain; charset=us-ascii

Quoted 7 lines · Jonathan McDowell

I'm not quite sure if this is necessary or not. I've found I need it to get USB working correctly on the Amstrad E3, which is an OMAP5910. From my reading of ohci-omap.c usb_dc_ck is requested for the 1510 as well, and if it can't be obtained an error is returned.

Does anyone have USB working correctly on a 1510/5910 with latest git without something like the below?

Scratch that for the moment. I'm now getting:

ohci ohci: Unlink after no-IRQ? Controller is probably using the wrong IRQ.

even with this patch, whereas it worked fine for 2.6.15-omap1.

I'd still like to know if anyone's having success with a 1510/5910 and latest git though, as I've had someone else tell me they were seeing similar problems on a platform that wasn't the E3 (unfortunately it was on IRC and I don't have their details. :( ).

J.

Signature · 50 lines
[ noodles is almost a national pastime in japan ]
[ http://www.blackcatnetworks.co.uk/ - IPv6 enabled ADSL/dialup/colo ]


------------------------------

Message: 2
Date: Tue, 28 Mar 2006 12:29:06 -0800 (PST)
From: Komal Shah 
Subject: palmte lcd warnings
To: [email protected]
Message-ID: <[email protected]>
Content-Type: text/plain; charset=iso-8859-1

Build warning from lcd panel source - latest omap-git tree.

...
-c -o drivers/video/omap/lcd_palmte.o drivers/video/omap/lcd_palmte.c
drivers/video/omap/lcd_palmte.c:86: warning: initialization from
incompatible pointer type
drivers/video/omap/lcd_palmte.c:87: warning: initialization from
incompatible pointer type
drivers/video/omap/lcd_palmte.c:88: warning: initialization from
incompatible pointer type
drivers/video/omap/lcd_palmte.c:89: warning: initialization from
incompatible pointer type
drivers/video/omap/lcd_palmte.c:90: warning: initialization from
incompatible pointer type
....

---Komal Shah
http://komalshah.blogspot.com/

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 


------------------------------

Message: 3
Date: Tue, 28 Mar 2006 16:59:18 -0400
From: Carlos Aguiar 
Subject: Re: [PATCH] fix MMC response types
To: [email protected]
Cc: omap-linux 

Message-ID: <[email protected]>
Content-Type: text/plain; charset="utf-8"
Quoted 74 lines · ext andrzej zaborowski
Quoted 33 lines · Carlos Aguiar
Quoted 17 lines · ext andrzej zaborowski

Previously the MMC/SD protocol layer didn't provide command and response types to mmc_omap_start_command(). In 2.6.16 it does and the hack that tries to find the correct command/response types based on flags is no longer needed.
This matters particularly for response types because for command types this hack worked fine, while it failed to give correct response type for some SD commands such as CMD3 (in most cases this caused no big problems because the size of the response matched). Regards,
Andrzej
--
balrog 2oo6

Dear Outlook users: Please remove me from your address books
http://www.newsforge.com/article.pl?sid=03/08/21/143258

Quoted 10 lines

------------------------------------------------------------------------

_______________________________________________
Linux-omap-open-source mailing list
[email protected]
http://linux.omap.com/mailman/listinfo/linux-omap-open-source

Hi Andrzej and folks,

Quoted 10 lines

Attached to this mail follow my propose of fixing MMC responde types in mmc_omap_start_command().

This is based on the patches of the thread '[RFC] mmc: add OMAP driver' that I sent to LKML mailing-list in order to have integrated the MMC OMAP driver on the mainline kernel.

Comments and suggestions are welcome.

It looks fine except you forgot about the response type 6. With the current version of mmc_omap_start_command() the hack assumes response type 1 in place of 6 which merely causes the MMC/SD host controller to misinterpret the status flags in the response from the card, but the size of the response matches. However with your patch it would assume no response at all which would most probably cause breakage.

Quoted 4 lines

BR,

Carlos.

Quoted 14 lines

--
Carlos Eduardo
Software Engineer
Nokia Institute of Technology - INdT
Embedded Linux Laboratory - 10LE
Phone: +55 92 2126-1079
Mobile: +55 92 8127-1797
E-mail: [email protected]

Quoted 9 lines

Regards,
Andrew
--
balrog 2oo6

Dear Outlook users: Please remove me from your address books
http://www.newsforge.com/article.pl?sid=03/08/21/143258

Hi Andrew and folks,

The response type 6 was included. Thanks for your observation.

BR,

Carlos.

Signature · 27 lines
Carlos Eduardo
Software Engineer
Nokia Institute of Technology - INdT
Embedded Linux Laboratory - 10LE
Phone: +55 92 2126-1079
Mobile: +55 92 8127-1797
E-mail: [email protected]

-------------- next part --------------
A non-text attachment was scrubbed...
Name: mmc_omap_rsp.patch
Type: text/x-patch
Size: 2159 bytes
Desc: not available
Url : http://linux.omap.com/pipermail/linux-omap-open-source/attachments/20060328/27111ece/mmc_omap_rsp-0001.bin

------------------------------

Message: 4
Date: Wed, 29 Mar 2006 01:16:09 +0200
From: "andrzej zaborowski" 
Subject: Re: palmte lcd warnings
To: "Komal Shah" 
Cc: [email protected]
Message-ID:

Content-Type: text/plain; charset="utf-8"
Quoted 19 lines · Komal Shah

Build warning from lcd panel source - latest omap-git tree.

...
-c -o drivers/video/omap/lcd_palmte.o drivers/video/omap/lcd_palmte.c drivers/video/omap/lcd_palmte.c:86: warning: initialization from incompatible pointer type drivers/video/omap/lcd_palmte.c:87: warning: initialization from incompatible pointer type drivers/video/omap/lcd_palmte.c:88: warning: initialization from incompatible pointer type drivers/video/omap/lcd_palmte.c:89: warning: initialization from incompatible pointer type drivers/video/omap/lcd_palmte.c:90: warning: initialization from incompatible pointer type
....

---Komal Shah
http://komalshah.blogspot.com/

Quoted 9 lines

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
Linux-omap-open-source mailing list [email protected]
http://linux.omap.com/mailman/listinfo/linux-omap-open-source

Please find the fix attached. Tested to build and to work. Regards,
--
balrog 2oo6

Dear Outlook users: Please remove me from your address books
http://www.newsforge.com/article.pl?sid=03/08/21/143258
-------------- next part --------------
A non-text attachment was scrubbed...
Name: lcd_palmte-warnings.patch
Type: application/octet-stream
Size: 1196 bytes
Desc: not available
Url : http://linux.omap.com/pipermail/linux-omap-open-source/attachments/20060329/5394a5bf/lcd_palmte-warnings-0001.obj

------------------------------

Message: 5
Date: Wed, 29 Mar 2006 10:19:49 +0800
From: =?gb2312?B?zfWxprHy?=
Subject: About dct4x4 transform on 55x dsp,who can provide a good way? To:

Message-ID: <001301c652d7$4235b4a0$9d0aa8c0@yfwangbaobin>
Content-Type: text/plain; charset="gb2312"

hi:
i want to get dct4x4 transform in 55x dsp. And I get some useful information from the document " TMS320C55x Hardware Extensions for Image/Video Applications Programmer¡¯s Reference".------you can get it from internet easily. the document explain how to get dct8x8 transform result step by step.i have tested it !right.
In page 2-5 , it tell me some information about how to get dct4x4 tranforme result.but it is
so obscurity that i can't understand how to use it!!
who can give me hands! thanks.
b.w.b

------------------------------

Message: 6
Date: Wed, 29 Mar 2006 12:04:02 +0900
From: "chandrashekhar singh"
Subject: Stack pointer register accesing problem with monta- vista linux 2.4 on OMAP 730
To:

Message-ID: <001e01c652dd$a25cab30$5811a80a@cpsingh>
Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original

Dear all,

I'm facing a very strange problem with Monta-Vista linux 2.4 which is running on OMAP 730.

I have some assembler code which uses stack pointer register to load or store the intermediate value of variables. The source code work well on linux 2.6 running on OMAP 2420 but when I execute it on Monta-Vista linux 2.4 running on OMAP 730 it gives 'segmentation fault'.

I've noticed that problem lies in stack pointer register as when i tries to access stack pointer register directaly it gives segmentation fault. Following snippet does not work on Monta-vista linux 2.4 running on OMAP 730 but work well on Linux 2.6 running on OMAP2420.

.set FRAMEPROC_ASM_STACK, 48

FRAMEPROC_DUMMY:
stmdb sp!, {r4-r11, lr}
sub sp, sp, #FRAMEPROC_ASM_STACK
mov r5, #5
str r5, [sp, #12]
add sp, sp, #FRAMEPROC_ASM_STACK
ldmia sp!, {r4-r11, pc}

The have modified the assembler code as follows and tested it on both target then it works well on both target. I'm not getting why ?

.set FRAMEPROC_ASM_STACK, 48

FRAMEPROC_DUMMY:
stmdb sp!, {r4-r11, lr}
sub sp, sp, #FRAMEPROC_ASM_STACK

mov r14, sp
mov r5, #5
str r5, [r14,#12]
@str r5, [sp, #12]
add sp, sp, #FRAMEPROC_ASM_STACK
ldmia sp!, {r4-r11, pc}

Though I've got temporary solution but my assembler source code is quite big and it is very difficult to rewrite it as i dont have free register in actual source to map the stack pointer register to another register.

Can any body put some light as why it happening on Monta-vista linux ???

Thanks in advance
chandrasheskhar
[email protected]

----- Original Message -----
From:

To:

Sent: Wednesday, March 29, 2006 3:00 AM
Subject: Linux-omap-open-source Digest, Vol 23, Issue 60

Quoted 386 lines

Send Linux-omap-open-source mailing list submissions to [email protected]

To subscribe or unsubscribe via the World Wide Web, visi
http://linux.omap.com/mailman/listinfo/linux-omap-open-source
or, via email, send a message with subject or body 'help' to [email protected]

You can reach the person managing the list at
[email protected]

When replying, please edit your Subject line so it is more specific than "Re: Contents of Linux-omap-open-source digest..."

Today's Topics:

1. About to tag 2.6.16-omap1 & current patch status (Tony Lindgren)
2. RE: U-boot 1.1.4 compilation problem (Giron, Jeremy)
3. RE: DSP Gateway for OMAP5912 ([email protected])
4. [PATCH] Fix USB host on 1510/5910? (Jonathan McDowell)

----------------------------------------------------------------------

Message: 1
Date: Tue, 28 Mar 2006 07:35:02 -0800
From: Tony Lindgren
Subject: About to tag 2.6.16-omap1 & current patch status
To: [email protected]
Message-ID: <[email protected]>
Content-Type: text/plain; charset=us-ascii

Hi all,

We're about to ready to tag 2.6.16-omap1. Let's do some testing and try to get few issues fixed. Currently there's at least the MMC issue with I2C powered sockets that we should fix before tagging 2.6.16-omap1.

Please report any issues that should be fixed for 2.6.16-omap1 to this thread.

Also following is a summary of the currently applied and pending patches.

Applied patches

Komal Shah [PATCH] OMAP: KEYPAD: sem2mutex conversion
Komal Shah [PATCH] OMAP: Menelaus: sem2mutex conversion Komal Shah [PATCH] OMAP: FB: sem2mutex conversion
Komal Shah [PATCH] OMAP: retu-rtc: sem2mutex conversion Komal Shah [PATCH] retu-user: sem2mutex conversion
Komal Shah [PATCH] OMAP: tahvo usb: sem2mutex conversion Komal Shah [PATCH] OMAP: tahvo_user: sem2mutex conversion Komal Shah [PATCH] OMAP: OSS: sem2mutex conversion
Komal Shah [PATCH] OMAP2: Fix H4 keypad
Komal Shah [PATCH] OMAP1: camera core : Use platform driver structure Komal Shah [PATCH] Fix OV9640 sensor and add h4 sensor power functions Jonathan McDowell [PATCH] Add support for Amstrad Delta (E3) Videophone

Pending patches for post 2.6.16-omap1

Komal Shah [PATCH] OMAP2 MCSPI Use resources
Hiroshi DOYU [patch 1/5] MMC BUGFIX TRIVIAL STUFFS
Richard Woodruff [PATCH] : Fix annoying 'too much work for irq72' serial Richard Woodruff [PATCH] OMAP2: timer+irq fix up
David Cohen [PATCH] omap24xxcamera
Carlos Aguiar [PATCH] fix MMC response types
Komal Shah [PATCH] OMAP2: ov9640 updates for H4
Komal Shah [PATCH] omap24xx camera cleanup
Komal Shah [PATCH] CBUS: various cleanups
Komal Shah [PATCH] OMAP: MMC: Move set_power to platform data Komal Shah [PATCH] OMAP: FB: Use blocking notifier apis

Regards,

Tony

------------------------------

Message: 2
Date: Tue, 28 Mar 2006 08:47:31 -0700
From: "Giron, Jeremy"
Subject: RE: U-boot 1.1.4 compilation problem
To: "Hiroki Kaminaga"
Cc: [email protected]
Message-ID:

Content-Type: text/plain; charset=us-ascii

Hiroki,
Yes, you are correct. I'm not sure how it worked without it.

It should mimic omap1510imm.h:

#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */

#define CFG_FLASH_BASE PHYS_FLASH_1
<...>
#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ #define PHYS_FLASH_SIZE 0x01000000 /* 16MB */
#define PHYS_FLASH_SECT_SIZE (128*1024) /* Size of a sector (128kB) */
#define CFG_MAX_FLASH_SECT (128) /* max number of sectors on one chip */
#define CFG_ENV_ADDR (CFG_FLASH_BASE + PHYS_FLASH_SECT_SIZE) #define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */
#define CFG_MONITOR_LEN PHYS_FLASH_SECT_SIZE /* Reserve 1 sector */
#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE + PHYS_FLASH_SIZE }

Result:
OMAP5912 OSK # flinfo

Bank # 1: CFI conformant FLASH (16 x 16) Size: 16 MB in 128 Sectors

Erase timeout 16384 ms, write timeout 2 ms, buffer write timeout 2048 ms, buffe
r size 32

Sector Start Addresses:

00000000 (RO) 00020000 (RO) 00040000 00060000 00080000

000A0000 000C0000 000E0000 00100000 00120000

<...>
00F00000 00F20000 00F40000 00F60000 00F80000

00FA0000 00FC0000 00FE0000

Bank # 2: CFI conformant FLASH (16 x 16) Size: 16 MB in 128 Sectors

Erase timeout 16384 ms, write timeout 2 ms, buffer write timeout 2048 ms, buffe
r size 32

Sector Start Addresses:

01000000 01020000 01040000 01060000 01080000

010A0000 010C0000 010E0000 01100000 01120000

<...>
01F00000 01F20000 01F40000 01F60000 01F80000

01FA0000 01FC0000 01FE0000

Best regards,
Jeremy

-----Original Message-----
From: Hiroki Kaminaga [mailto:[email protected]]
Sent: Sunday, March 26, 2006 11:48 PM
To: Giron, Jeremy
Cc: [email protected]; [email protected]; [email protected]
Subject: Re: U-boot 1.1.4 compilation problem

Hi,

sorry for late reply,

Quoted 3 lines

It is also necessary to change CFG_MAX_FLASH_BANKS to 2 (from 1). Otherwise the CFI driver will only detect a single 16MB bank, rather than the full 16MBx2 = 32MB.

Umm, that's right. Also if you change to 2, you also need to set CFG_FLASH_BANKS_LIST too?

Best Regards,

(Hiroki Kaminaga)
t
--

------------------------------

Message: 3
Date: Wed, 29 Mar 2006 01:32:19 +0900
From:
Subject: RE: DSP Gateway for OMAP5912
To: ,

Message-ID:
<[email protected]>
Content-Type: text/plain; charset="US-ASCII"

Hi,

I'm using Linux 2.6.12 + OMAP patch from www.muru.com with DSP Gateway 3.3 on OSK5912. But I have not seen such problem so far... Did you try the other sample program (e.g. task_test?, hellotimer, etc.)?

BR,
Kiyotaka

-----Original Message-----
From:
linux-omap-open-source-bounces+kiyotaka.takahashi=nokia.com@linux.omap.c om [mailto:linux-omap-open-source-bounces+kiyotaka.takahashi=nokia.com@linu x.omap.com] On Behalf Of ext naga rajan
Sent: Tuesday, March 28, 2006 7:37 PM
To: [email protected]
Subject: DSP Gateway for OMAP5912

Hi all,

I like to proceed with DSP gateway for DSP applications development. I like to know the exact kernel, DSP gateway version and the
exact patches for kernel 2.6 series and for DSP gateway.I tried with kernel
2.6.12 and DSP gateway 3.3. While executing the application, I m getting the
following error

# dspctl start demo_console.out

loading demo_console.out...

dspgw_task : adr = 0x00c440, size= 36

dspgw_version : adr = 0x000000, size= 8 ... ignored.

Unable to handle kernel paging request at virtual address e0010000

pgd = c1d30000

[e0010000] *pgd=00000000

Internal error: Oops: 805 [#1]

Modules linked in:

CPU: 0

PC is at .cfu_0fupi+0x10/0x50

LR is at intmem_write+0x8c/0xdc

pc : [] lr : [] Not tainted

sp : c1cf7ed8 ip : 00000000 fp : c1cf7f1c

r10: e0010000 r9 : c024c6dc r8 : c1cf7f74

r7 : 00000008 r6 : 00000008 r5 : 00000008 r4 : be913d5c

r3 : 00000000 r2 : 00000004 r1 : be913d60 r0 : e0010000

Flags: nzCv IRQs on FIQs on Mode SVC_32 Segment user

Control: 5317F Table: 11D30000 DAC: 00000015

Process dspctl (pid: 723, stack limit = 0xc1cf6194)

Stack: (0xc1cf7ed8 to 0xc1cf8000)

7ec0: e0010000
00000008

7ee0: be913d5c 00000008 00000008 00000008 c003ca04 00028000 00000000 c1cf7f74

7f00: be913d5c 00000008 e0010000 c02ea760 c1cf7f48 c1cf7f20 c003cbb0 c003c988

7f20: 00000008 00000000 be913d5c c02ea760 c1cf6000 00000000 c1cf7f74 c1cf7f70

7f40: c1cf7f4c c00851fc c003cb40 c02ea784 fffffff7 c02ea760 c1cf7f74 00010000

7f60: 4014bafc c1cf7fa4 c1cf7f74 c0085338 c0085148 00010000 00000000 00000000

7f80: be913eb4 4001df40 0000c570 00000004 c0022e04 c1cf6000 00000000 c1cf7fa8

7fa0: c0022c80 c00852f8 be913eb4 c0029c18 00000005 be913d5c 00000008 be913d5c

7fc0: be913eb4 4001df40 0000c570 00000003 4014e1d0 000089f0 4014bafc be913db8

7fe0: 00000000 be913d54 00003f64 400ec830 60000010 00000005 00000000 00000000

Backtrace:

[] (intmem_write+0x0/0xdc) from []
(dsp_mem_write+0x80/0xb4)

[] (dsp_mem_write+0x0/0xb4) from []
(vfs_write+0xc4/0x13c)

[] (vfs_write+0x0/0x13c) from []
(sys_write+0x50/0x74)

[] (sys_write+0x0/0x74) from []
(ret_fast_syscall+0x0/0x2c)

r9 = C1CF6000 r8 = C0022E04 r7 = 00000004 r6 = 0000C570

r5 = 4001DF40 r4 = BE913EB4

Code: e2522004 4282c004 4a000026 e4b13004 (e4803004)

Segmentation fault

I tried with patches mentioned in the
source forge.net. If you have succeeded this problem,I like to know the details such as kernel.DSP gateway and patches you used. Please help me in
this regard.

Thanks in advance,

B.Nagarajan,

SANDS.
_______________________________________________
Linux-omap-open-source mailing list
[email protected]
http://linux.omap.com/mailman/listinfo/linux-omap-open-source

------------------------------

Message: 4
Date: Tue, 28 Mar 2006 17:44:03 +0100
From: Jonathan McDowell
Subject: [PATCH] Fix USB host on 1510/5910?
To: [email protected]
Message-ID: <[email protected]>
Content-Type: text/plain; charset=us-ascii

I'm not quite sure if this is necessary or not. I've found I need it to get USB working correctly on the Amstrad E3, which is an OMAP5910. From my reading of ohci-omap.c usb_dc_ck is requested for the 1510 as well, and if it can't be obtained an error is returned.

Does anyone have USB working correctly on a 1510/5910 with latest git without something like the below?

Signed-off-by Jonathan McDowell

-----

arch/arm/mach-omap1/clock.h +1 -2
index b7c6881..db48d73 100644
@@ -633,7 +633,7 @@ static struct clk usb_dc_ck = {
 .name = "usb_dc_ck",
 /* Direct from ULPD, no parent */
 .rate = 48000000,
- .flags = CLOCK_IN_OMAP16XX | RATE_FIXED,
+ .flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | RATE_FIXED,
 .enable_reg = (void __iomem *)SOFT_REQ_REG,
 .enable_bit = 4,
 .enable = &omap1_clk_enable_generic,
-----
Quoted 16 lines

J.

Signature · 10 lines
------------------------------

_______________________________________________
Linux-omap-open-source mailing list
[email protected]
http://linux.omap.com/mailman/listinfo/linux-omap-open-source


End of Linux-omap-open-source Digest, Vol 23, Issue 60
******************************************************

------------------------------

_______________________________________________
Linux-omap-open-source mailing list
[email protected]
http://linux.omap.com/mailman/listinfo/linux-omap-open-source

End of Linux-omap-open-source Digest, Vol 23, Issue 61
******************************************************

---------------------------------
Jiyo cricket on Yahoo! India cricket
Yahoo! Messenger Mobile Stay in touch with your buddies all the time.