Add user-settable collie frontlight support
Subsystems (3)
This adds support for setting frontlight on collie and similar machines. It only adds 4 levels for now; I could probably do more, but I do not understand how exactly hardware works (duty parameter seems clear but what is bpwf?), so lets only use values Sharp uses for a start.
Signed-off-by Pavel Machek <[email protected]>
PATCH FOLLOWS
KernelVersion: 2.6.16-rc5-git
arch/arm/common/locomo.c +20 -22
@@ -507,7 +507,7 @@ locomo_init_one_child(struct locomo *lch goto out; } -strncpy (dev->dev.bus_id,info->name,sizeof (dev->dev.bus_id)); +strncpy (dev->dev.bus_id, info->name,sizeof (dev->dev.bus_id));/* * If the parent device has a DMA mask associated with it, * propagate it down to the children.
@@ -629,21 +629,6 @@ static int locomo_resume(struct platform#endif -#define LCM_ALC_EN 0x8000 - -void frontlight_set (struct locomo *lchip,int duty,int vr,int bpwf) -{ -unsigned long flags; - -spin_lock_irqsave (&lchip->lock, flags); -locomo_writel (bpwf, lchip->base +LOCOMO_FRONTLIGHT +LOCOMO_ALS ); -udelay (100 ); -locomo_writel (duty, lchip->base +LOCOMO_FRONTLIGHT +LOCOMO_ALD ); -locomo_writel (bpwf |LCM_ALC_EN , lchip->base +LOCOMO_FRONTLIGHT +LOCOMO_ALS ); -spin_unlock_irqrestore (&lchip->lock, flags); -} - -/** * locomo_probe - probe for a single LoCoMo chip. * @phys_addr: physical address of device.
@@ -698,14 +683,10 @@ __locomo_probe(struct device *me, struct , lchip->base + LOCOMO_GPD);locomo_writel (0 , lchip->base +LOCOMO_GIE ); -/* FrontLight */ +/* Frontlight */ locomo_writel (0 , lchip->base +LOCOMO_FRONTLIGHT +LOCOMO_ALS );locomo_writel (0 , lchip->base +LOCOMO_FRONTLIGHT +LOCOMO_ALD ); -/* Same constants can be used for collie and poodle -(depending on CONFIG options in original sharp code)? */ -frontlight_set (lchip,163 ,0 ,148 ); -/* Longtime timer */ locomo_writel (0 , lchip->base +LOCOMO_LTINT );/* SPI */
@@ -749,7 +730,6 @@ __locomo_probe(struct device *me, structfor (i =0 ; i <ARRAY_SIZE (locomo_devices); i++)locomo_init_one_child (lchip, &locomo_devices[i]); -return 0 ; out:
@@ -1063,6 +1043,24 @@ void locomo_m62332_senddata(struct locom }/* +* Frontlight control +*/ + +void locomo_frontlight_set (struct locomo_dev *dev,int duty,int vr,int bpwf) +{ +unsigned long flags; +struct locomo *lchip =locomo_chip_driver (dev); + +spin_lock_irqsave (&lchip->lock, flags); +locomo_writel (bpwf, lchip->base +LOCOMO_FRONTLIGHT +LOCOMO_ALS ); +udelay (100 ); +locomo_writel (duty, lchip->base +LOCOMO_FRONTLIGHT +LOCOMO_ALD ); +#define LOCOMO_ALC_EN 0x8000 +locomo_writel (bpwf |LOCOMO_ALC_EN , lchip->base +LOCOMO_FRONTLIGHT +LOCOMO_ALS ); +spin_unlock_irqrestore (&lchip->lock, flags); +} + +/* * LoCoMo "Register Access Bus." * * We model this as a regular bus type, and hang devices directly
drivers/video/backlight/locomolcd.c +41 -0
66 lines not on this page · raw message
include/asm-arm/hardware/locomo.h +3 -0
@@ -203,4 +203,7 @@ void locomo_gpio_write(struct locomo_dev/* M62332 control function */ void locomo_m62332_senddata (struct locomo_dev *ldev,unsigned int dac_data,int channel); +/* Frontlight control */ +void locomo_frontlight_set (struct locomo_dev *dev,int duty,int vr,int bpwf); +#endif
Signature · 1 line
Picture of sleeping (Linux) penguin wanted...