2.6.17-rc1-mm1 - detects buggy TSC on GEODE
Quoted 2 lines · Andrew Morton
Sorry, I should have cc'ed you on this :(
No worries.
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
1. the new kernel is now detecting the buggy TSC on the GEODE-sc1100
2. the bug is apparently correctable by passing 'idle=poll' on kernel
boot-line.
I am assuming that this is the problem where the TSC doesn't roll over correctly on the SC1100 and SC1200.
Quoted 2 lines
Quoted 2 lines
John, does this mean that enable-tsc-for-amd-geode-gx-lx.patch is only safe to merge after all your time-management patches have gone in?
If that is the case, then the enable-tsc-for-amd-geode-gx-lx.patch is still safe since the TSC on the GX and LX doesn't have that same problem.
For what its worth, we used to have a fix for the TSC issue back in the 2.4 days that looked something like this:
#ifdef CONFIG_GEODE_SC1200
#define rdtsc(low,high) \
__asm__ __volatile__("rdtsc" : "=a" (low), "=d" (high)); \
if ((unsigned long) low > 0xFFFFFFFC) high--
#else
#define rdtsc(low,high) \
__asm__ __volatile__("rdtsc" : "=a" (low), "=d" (high))#endif
That seemed to work, but it is ugly, and I didn't bring it forward when we moved to 2.6. Perhaps we can revive it if there are SC1100/SC1200 users who need it.
Thanks,
Jordan
Signature · 4 lines
Jordan Crouse Senior Linux Engineer AMD - Personal Connectivity Solutions Group <www.amd.com/embeddedprocessors>