Skip to contentSkip to conversation

kbuild fixes for 2.6.17-rc1

PATCH New Sam Ravnborg 1 participant 1 message Apr 11, 2006

Subsystems (6)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 kbuild fixes for 2.6.17-rc1

Hi Linus

Here follows kbuild fixes for 2.6.17-rc1 + a number of kconfig fixes.

Most noteworthy kbuild fixes:
o fix NULL dereference in modpost
o fix mips build after introducing -fasm-offsets gcc flag
o fix several make <single-target> bugs
o rebuild less when source-tree are moved
o rebuild initramfs if content of initramfs changes

For kconfig Roman Zippel wrote:
The first four patches I'd like to see to go into 2.6.17 if possible. Although I'm quite confident about the remaining patches, a bit more testing can't hurt.
The mentioned first four kconfig patches are included in this set.

short-log, diffstat, log + full diff follows.
The 'rebuild initramfs if content of initramfs changes' counts for the majority of the diff.

Please pull from:

git pull git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild.git

Sam

Alexey Dobriyan:
ver_linux: don't print reiser4progs version if none found

Andreas Gruenbacher:
kbuild: modules_install for external modules must not remove existing modules

Atsushi Nemoto:
kbuild: mips: fix sed regexp to generate asm-offset.h

Brian Gerst:
kbuild: fix garbled text in modules.txt

Carl-Daniel Hailfinger:
kbuild: fix unneeded rebuilds in drivers/media/video after moving source tree
kbuild: fix unneeded rebuilds in drivers/net/chelsio after moving source tree

Eric Sesterhenn:
kbuild: fix NULL dereference in scripts/mod/modpost.c

Paolo 'Blaisorblade' Giarrusso:
kbuild: fix mode of checkstack.pl and other files.

Roman Zippel:
kconfig: fix default value for choice input
kconfig: revert conf behaviour change
kconfig: recenter menuconfig
kconfig: fix typo in change count initialization

Sam Ravnborg:
kbuild: use relative path to -I
kbuild: fix building single targets with make O=.. single-target
kbuild: fix make dir/
kbuild: properly pass options to hostcc when doing make O=..
kbuild: rebuild initramfs if content of initramfs changes

 Documentation/kbuild/modules.txt     |    2 
 Kbuild                               |    2 
 Makefile                             |   54 ++++----
 arch/ppc/boot/lib/Makefile           |    2 
 arch/sparc/math-emu/Makefile         |    2 
 drivers/media/video/Makefile         |    2 
 drivers/media/video/bt8xx/Makefile   |    2 
 drivers/media/video/cx25840/Makefile |    2 
 drivers/media/video/cx88/Makefile    |    6 
 drivers/media/video/em28xx/Makefile  |    2 
 drivers/media/video/saa7134/Makefile |    6 
 drivers/net/chelsio/Makefile         |    2 
 scripts/Kbuild.include               |    5 
 scripts/Makefile.lib                 |    5 
 scripts/gen_initramfs_list.sh        |  225 +++++++++++++++++++++++------------
 scripts/kconfig/conf.c               |   21 ---
 scripts/kconfig/confdata.c           |    2 
 scripts/kconfig/lxdialog/menubox.c   |   19 +-
 scripts/mod/modpost.c                |    2 
 scripts/ver_linux                    |    4 
 usr/Makefile                         |   91 +++++---------
 21 files changed, 254 insertions(+), 204 deletions(-)

commit b5ac4817de3032796c558b0a32062e7392b5ea60

Author: Roman Zippel <[email protected]>
Date:   Sun Apr 9 17:27:28 2006 +0200

kconfig: fix typo in change count initialization

Configuration needs saving when either of these conditions is true.

commit 94f2505be3b6afaf50129e949b1840bc4dd0b3e8

Author: Roman Zippel <[email protected]>
Date:   Sun Apr 9 17:27:14 2006 +0200

kconfig: recenter menuconfig

Move the menuconfig output more into the centre again, it's using a fixed position depending on the window width using the fact that the menu output has to work in a 80 chars terminal.

commit 59c6a3f4d745584f2f78cdf1f5e221a19518926c

Author: Roman Zippel <[email protected]>
Date:   Sun Apr 9 17:26:50 2006 +0200

kconfig: revert conf behaviour change

After the last patch fixed the real problem, revert this needless behaviour change of conf, which only hid the real problem.

commit 40aee729b350672c2550640622416a855e27938f

Author: Roman Zippel <[email protected]>
Date:   Sun Apr 9 17:26:39 2006 +0200

kconfig: fix default value for choice input

The wrong default value can cause conf to end up in endless loop for choice questions.

commit eaaae38c1ac4ccbec6d2de7255b0538f38fb29d6

Author: Eric Sesterhenn <[email protected]>
Date:   Tue Apr 11 00:54:16 2006 +0200

kbuild: fix NULL dereference in scripts/mod/modpost.c

before is NULL in this case, concluding from the surrounding code it seems that after is the right one to use.

commit 71378be91f5473e89c8be170c6e49edda3bdbb67

Author: Paolo 'Blaisorblade' Giarrusso <[email protected]>
Date:   Fri Apr 7 16:16:40 2006 +0200

kbuild: fix mode of checkstack.pl and other files.

Make it executable like it should be. Do the same for other files intended to be executed by the user - the ones called by the build process needn't be executable as they already work (as argument to their interpreter).

commit d39a206bc35d46a3b2eb98cd4f34e340d5e56a50

Author: Sam Ravnborg <[email protected]>
Date:   Tue Apr 11 13:24:32 2006 +0200

kbuild: rebuild initramfs if content of initramfs changes

initramfs.cpio.gz being build in usr/ and included in the kernel was not rebuild when the included files changed.

To fix this the following was done:
- let gen_initramfs.sh generate a list of files and directories included in the initramfs
- gen_initramfs generate the gzipped cpio archive so we could simplify the kbuild file (Makefile)
- utilising the kbuild infrastructure so when uid/gid root mapping changes the initramfs will be rebuild

With this change we have a much more robust initramfs generation.

commit d9df92e22aca939857c5bc9ecb130ef22307ccc1

Author: Sam Ravnborg <[email protected]>
Date:   Fri Apr 7 08:36:49 2006 +0200

kbuild: properly pass options to hostcc when doing make O=..

This fix a longstanding bug where proper options was not passed to hostcc in case of a make O=.. build.
This bug showed up in (not yet merged) klibc, and is not known to have any counterpart in-kernel.
Fixed by moving the flags macro to Kbuild.include so it can be used by both Makefile.lib and Makefile.host.

commit 7d2d8fe0cb88914d26219db51341d780a032b198

Author: Andreas Gruenbacher <[email protected]>
Date:   Wed Apr 5 23:33:50 2006 +0200

kbuild: modules_install for external modules must not remove existing modules

When installing external modules with `make modules_install', the first thing that happens is a rm -rf of the target directory. This works only once, and breaks when installing more than one (set of) external module(s).
With following fix we have the functionality:
- for a in-kernel modules_install the $(MODLIB)/kernel directory will be deleted before module installation
- for external modules the existing modules will be left as is assuming one may be building and installign several external modules

commit aa360879ed38fbe88057cc43f720881ab9e6a63a

Author: Sam Ravnborg <[email protected]>
Date:   Thu Apr 6 08:25:31 2006 +0200

kbuild: fix make dir/

kbuild added an extra '/' after the directory - resulting in all files being rebuild in a subdirectory.

commit ea88df9bf895720289331e41ed73cdcb04059900

Author: Alexey Dobriyan <[email protected]>
Date:   Wed Sep 21 21:37:24 2005 +0400

ver_linux: don't print reiser4progs version if none found

Sam: did the same for reiserprogs

commit 0947640f4388de50a39f762748b08e586a482527

Author: Atsushi Nemoto <[email protected]>
Date:   Tue Mar 28 00:18:54 2006 +0900

kbuild: mips: fix sed regexp to generate asm-offset.h

Changes to Makefile.kbuild ("kbuild: add -fverbose-asm to i386 Makefile") breaks asm-offset.h file on MIPS. Other archs possibly suffer this change too but I'm not sure.

Here is a fix just for MIPS.

commit bc2546a67975a7bddc72f8c48b0bb2081b56f853

Author: Sam Ravnborg <[email protected]>
Date:   Wed Apr 5 12:57:21 2006 +0200

kbuild: fix building single targets with make O=.. single-target

This fixes single targets build so it now works relaiably in following cases:
- build with mixed kernel source and output files (make single-target)
- build with separate output directory (make O=.. single-target)
- external module with mixed kernel source and output files (make M='pwd' single-target)
- external module with separate kernel source and output files (make O=.. M='pwd' single-target)

commit b46da0567d3baa6783106e7463801292cdc79ddd

Author: Sam Ravnborg <[email protected]>
Date:   Tue Apr 4 16:56:10 2006 +0200

kbuild: use relative path to -I

Using a relative path has the advantage that when the kernel source tree is moved the relevant .o files will not be rebuild just because the path to the kernel src has changed.
This also got rid of a user of TOPDIR - which has been deprecated for a long time now.

commit 1417ae0869472f4f3768779c51c3979faca20b2e

Author: Carl-Daniel Hailfinger <[email protected]>
Date:   Tue Apr 4 01:02:30 2006 +0200

kbuild: fix unneeded rebuilds in drivers/net/chelsio after moving source tree

This fixes some uneeded rebuilds under drivers/net/chelsio after moving the source tree. The makefiles used $(TOPDIR) for include paths, which is unnecessary. Changed to use relative paths.

Compile tested, produces byte-identical code to the previous makefiles.

commit 8036dc6bdca0faa981be01377728678a6f6f3fde

Author: Carl-Daniel Hailfinger <[email protected]>
Date:   Tue Apr 4 00:35:36 2006 +0200

kbuild: fix unneeded rebuilds in drivers/media/video after moving source tree

This fixes some uneeded rebuilds under drivers/media/video after moving the source tree. The makefiles used $(src) and $(srctree) for include paths, which is unnecessary. Changed to use relative paths.

Compile tested, produces byte-identical code to the previous makefiles.

commit a7d7cb3cd6c97cbbe21d528c014e5f592006457d

Author: Brian Gerst <[email protected]>
Date:   Sat Mar 25 14:48:37 2006 -0500

kbuild: fix garbled text in modules.txt

Documentation/kbuild/modules.txt +1 -1
index fcccf24..61fc079 100644
@@ -44,7 +44,7 @@ What is covered within this file is main
 of modules. The author of an external modules should supply
 a makefile that hides most of the complexity so one only has to type
 'make' to build the module. A complete example will be present in
-chapter ¤. Creating a kbuild file for an external module".
+chapter 4, "Creating a kbuild file for an external module".
 
 
 === 2. How to build external modules
Kbuild +1 -1
index 95d6a00..2d4f95e 100644
@@ -18,7 +18,7 @@ define sed-y
 	"/^->/{s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; s:->::; p;}"
 endef
 # Override default regexp for specific architectures
-sed-$(CONFIG_MIPS) := "/^@@@/s///p"
+sed-$(CONFIG_MIPS) := "/^@@@/{s/^@@@//; s/ \#.*\$$//; p;}"
 
 quiet_cmd_offsets = GEN     $@
 define cmd_offsets
Makefile +28 -26

75 lines not on this page · raw message

arch/ppc/boot/lib/Makefile +1 -1
index d4077e6..80c84d5 100644
@@ -3,7 +3,7 @@ # Makefile for some libs needed by zImag
 #
 
 CFLAGS_kbd.o	:= -Idrivers/char
-CFLAGS_vreset.o := -I$(srctree)/arch/ppc/boot/include
+CFLAGS_vreset.o := -Iarch/ppc/boot/include
 
 zlib  := infblock.c infcodes.c inffast.c inflate.c inftrees.c infutil.c
 	 
arch/sparc/math-emu/Makefile +1 -1
index f84a9a6..8136987 100644
@@ -5,4 +5,4 @@ #
 obj-y    := math.o
 
 EXTRA_AFLAGS := -ansi
-EXTRA_CFLAGS = -I. -I$(TOPDIR)/include/math-emu -w
+EXTRA_CFLAGS = -I. -Iinclude/math-emu -w
drivers/media/video/Makefile +1 -1
index 4092a5e..b3ea2d6 100644
@@ -84,4 +84,4 @@ obj-$(CONFIG_USB_IBMCAM)        += usbvi
 obj-$(CONFIG_USB_KONICAWC)      += usbvideo/
 obj-$(CONFIG_USB_VICAM)         += usbvideo/
 
-EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core
+EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
drivers/media/video/bt8xx/Makefile +1 -1
index 94350f2..db641a3 100644
@@ -9,4 +9,4 @@ bttv-objs      :=      bttv-driver.o btt
 obj-$(CONFIG_VIDEO_BT848) += bttv.o
 
 EXTRA_CFLAGS += -I$(src)/..
-EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core
+EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
drivers/media/video/cx25840/Makefile +1 -1
index 32a896c..6e8665b 100644
@@ -3,4 +3,4 @@ cx25840-objs    := cx25840-core.o cx2584
 
 obj-$(CONFIG_VIDEO_CX25840) += cx25840.o
 
-EXTRA_CFLAGS += -I$(src)/..
+EXTRA_CFLAGS += -Idrivers/media/video
drivers/media/video/cx88/Makefile +3 -3
index 6482b9a..0dcd09b 100644
@@ -8,9 +8,9 @@ obj-$(CONFIG_VIDEO_CX88_DVB) += cx88-dvb
 obj-$(CONFIG_VIDEO_CX88_ALSA) += cx88-alsa.o
 obj-$(CONFIG_VIDEO_CX88_VP3054) += cx88-vp3054-i2c.o
 
-EXTRA_CFLAGS += -I$(src)/..
-EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core
-EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/frontends
+EXTRA_CFLAGS += -Idrivers/media/video
+EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
+EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
 
 extra-cflags-$(CONFIG_VIDEO_BUF_DVB) += -DHAVE_VIDEO_BUF_DVB=1
 extra-cflags-$(CONFIG_DVB_CX22702)   += -DHAVE_CX22702=1
drivers/media/video/em28xx/Makefile +1 -1
index da457a0..826d0e3 100644
@@ -3,4 +3,4 @@ em28xx-objs     := em28xx-video.o em28xx
 
 obj-$(CONFIG_VIDEO_EM28XX) += em28xx.o
 
-EXTRA_CFLAGS += -I$(src)/..
+EXTRA_CFLAGS += -Idrivers/media/video
drivers/media/video/saa7134/Makefile +3 -3
index 1ba9984..be7b9ee 100644
@@ -11,9 +11,9 @@ obj-$(CONFIG_VIDEO_SAA7134_OSS) += saa71
 
 obj-$(CONFIG_VIDEO_SAA7134_DVB) += saa7134-dvb.o
 
-EXTRA_CFLAGS += -I$(src)/..
-EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core
-EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/frontends
+EXTRA_CFLAGS += -Idrivers/media/video
+EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
+EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
 
 extra-cflags-$(CONFIG_VIDEO_BUF_DVB) += -DHAVE_VIDEO_BUF_DVB=1
 extra-cflags-$(CONFIG_DVB_MT352)     += -DHAVE_MT352=1
drivers/net/chelsio/Makefile +1 -1
index 91e9278..54c78d9 100644
@@ -4,7 +4,7 @@ #
 
 obj-$(CONFIG_CHELSIO_T1) += cxgb.o
 
-EXTRA_CFLAGS += -I$(TOPDIR)/drivers/net/chelsio $(DEBUG_FLAGS)
+EXTRA_CFLAGS += -Idrivers/net/chelsio $(DEBUG_FLAGS)
 
 
 cxgb-objs := cxgb2.o espi.o pm3393.o sge.o subr.o mv88x201x.o
scripts/Kbuild.include +5 -0
index 59620b1..b0d067b 100644
@@ -87,6 +87,11 @@ # Usage:
 # $(Q)$(MAKE) $(build)=dir
 build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj
 
+# Prefix -I with $(srctree) if it is not an absolute path
+addtree = $(if $(filter-out -I/%,$(1)),$(patsubst -I%,-I$(srctree)/%,$(1))) $(1)
+# Find all -I options and call addtree
+flags = $(foreach o,$($(1)),$(if $(filter -I%,$(o)),$(call addtree,$(o)),$(o)))
+
 # If quiet is set, only print short version of command
 cmd = @$(echo-cmd) $(cmd_$(1))
 
scripts/Makefile.lib +0 -5
index 550798f..2cb4935 100644
@@ -99,11 +99,6 @@ __a_flags	= $(_a_flags)
 __cpp_flags     = $(_cpp_flags)
 else
 
-# Prefix -I with $(srctree) if it is not an absolute path
-addtree = $(if $(filter-out -I/%,$(1)),$(patsubst -I%,-I$(srctree)/%,$(1))) $(1)
-# Find all -I options and call addtree
-flags = $(foreach o,$($(1)),$(if $(filter -I%,$(o)),$(call addtree,$(o)),$(o)))
-
 # -I$(obj) locates generated .h files
 # $(call addtree,-I$(obj)) locates .h files in srctree, from generated .c files
 #   and locates generated .h files
scripts/bloat-o-meter +0 -0
old mode 100644
new mode 100755
scripts/checkstack.pl +0 -0
old mode 100644
new mode 100755
scripts/gen_initramfs_list.sh +152 -73

297 lines not on this page · raw message

scripts/kconfig/conf.c +3 -18
index 10eeae5..ae5ab98 100644
@@ -63,20 +63,6 @@ static void check_stdin(void)
 	}
 }
 
-static char *fgets_check_stream(char *s, int size, FILE *stream)
-{
-	char *ret = fgets(s, size, stream);
-
-	if (ret == NULL && feof(stream)) {
-		printf(_("aborted!\n\n"));
-		printf(_("Console input is closed. "));
-		printf(_("Run 'make oldconfig' to update configuration.\n\n"));
-		exit(1);
-	}
-
-	return ret;
-}
-
 static void conf_askvalue(struct symbol *sym, const char *def)
 {
 	enum symbol_type type = sym_get_type(sym);
@@ -114,7 +100,7 @@ static void conf_askvalue(struct symbol 
 		check_stdin();
 	case ask_all:
 		fflush(stdout);
-		fgets_check_stream(line, 128, stdin);
+		fgets(line, 128, stdin);
 		return;
 	case set_default:
 		printf("%s\n", def);
@@ -328,8 +314,7 @@ static int conf_choice(struct menu *menu
 		printf("%*s%s\n", indent - 1, "", menu_get_prompt(menu));
 		def_sym = sym_get_choice_value(sym);
 		cnt = def = 0;
-		line[0] = '0';
-		line[1] = 0;
+		line[0] = 0;
 		for (child = menu->list; child; child = child->next) {
 			if (!menu_is_visible(child))
 				continue;
@@ -370,7 +355,7 @@ static int conf_choice(struct menu *menu
 			check_stdin();
 		case ask_all:
 			fflush(stdout);
-			fgets_check_stream(line, 128, stdin);
+			fgets(line, 128, stdin);
 			strip(line);
 			if (line[0] == '?') {
 				printf("\n%s\n", menu->sym->help ?
scripts/kconfig/confdata.c +1 -1
index 1b8882d..1b5df58 100644
@@ -325,7 +325,7 @@ int conf_read(const char *name)
 				sym->flags |= e->right.sym->flags & SYMBOL_NEW;
 	}
 
-	sym_change_count = conf_warnings && conf_unsaved;
+	sym_change_count = conf_warnings || conf_unsaved;
 
 	return 0;
 }
scripts/kconfig/lxdialog/menubox.c +10 -9
index 09512b5..bf8052f 100644
@@ -58,8 +58,7 @@
 
 #include "dialog.h"
 
-#define ITEM_IDENT 1   /* Indent of menu entries. Fixed for all menus */
-static int menu_width;
+static int menu_width, item_x;
 
 /*
  * Print menu item
@@ -70,7 +69,7 @@ static void do_print_item(WINDOW * win, 
 	int j;
 	char *menu_item = malloc(menu_width + 1);
 
-	strncpy(menu_item, item, menu_width - ITEM_IDENT);
+	strncpy(menu_item, item, menu_width - item_x);
 	menu_item[menu_width] = 0;
 	j = first_alpha(menu_item, "YyNnMmHh");
 
@@ -87,13 +86,13 @@ #else
 	wclrtoeol(win);
 #endif
 	wattrset(win, selected ? item_selected_attr : item_attr);
-	mvwaddstr(win, choice, ITEM_IDENT, menu_item);
+	mvwaddstr(win, choice, item_x, menu_item);
 	if (hotkey) {
 		wattrset(win, selected ? tag_key_selected_attr : tag_key_attr);
-		mvwaddch(win, choice, ITEM_IDENT + j, menu_item[j]);
+		mvwaddch(win, choice, item_x + j, menu_item[j]);
 	}
 	if (selected) {
-		wmove(win, choice, ITEM_IDENT + 1);
+		wmove(win, choice, item_x + 1);
 	}
 	free(menu_item);
 	wrefresh(win);
@@ -227,6 +226,8 @@ int dialog_menu(const char *title, const
 	draw_box(dialog, box_y, box_x, menu_height + 2, menu_width + 2,
 		 menubox_border_attr, menubox_attr);
 
+	item_x = (menu_width - 70) / 2;
+
 	/* Set choice to default item */
 	for (i = 0; i < item_no; i++)
 		if (strcmp(current, items[i * 2]) == 0)
@@ -263,10 +264,10 @@ int dialog_menu(const char *title, const
 	wnoutrefresh(menu);
 
 	print_arrows(dialog, item_no, scroll,
-		     box_y, box_x + ITEM_IDENT + 1, menu_height);
+		     box_y, box_x + item_x + 1, menu_height);
 
 	print_buttons(dialog, height, width, 0);
-	wmove(menu, choice, ITEM_IDENT + 1);
+	wmove(menu, choice, item_x + 1);
 	wrefresh(menu);
 
 	while (key != ESC) {
@@ -349,7 +350,7 @@ int dialog_menu(const char *title, const
 			print_item(scroll + choice, choice, TRUE);
 
 			print_arrows(dialog, item_no, scroll,
-				     box_y, box_x + ITEM_IDENT + 1, menu_height);
+				     box_y, box_x + item_x + 1, menu_height);
 
 			wnoutrefresh(dialog);
 			wrefresh(menu);
scripts/mod/modpost.c +1 -1
index 0b92ddf..7e8079a 100644
@@ -658,7 +658,7 @@ static void warn_sec_mismatch(const char
 		warn("%s - Section mismatch: reference to %s:%s from %s "
 		     "before '%s' (at offset -0x%llx)\n",
 		     modname, secname, refsymname, fromsec,
-		     elf->strtab + before->st_name,
+		     elf->strtab + after->st_name,
 		     (long long)r.r_offset);
 	} else {
 		warn("%s - Section mismatch: reference to %s:%s from %s "
scripts/namespace.pl +0 -0
old mode 100644
new mode 100755
scripts/show_delta +0 -0
old mode 100644
new mode 100755
scripts/ver_linux +2 -2
index beb43ef..84999f6 100755
@@ -39,10 +39,10 @@ tune2fs 2>&1 | grep "^tune2fs" | sed 's/
 fsck.jfs -V 2>&1 | grep version | sed 's/,//' |  awk \
 'NR==1 {print "jfsutils              ", $3}'
 
-reiserfsck -V 2>&1 | grep reiserfsck | awk \
+reiserfsck -V 2>&1 | grep ^reiserfsck | awk \
 'NR==1{print "reiserfsprogs         ", $2}'
 
-fsck.reiser4 -V 2>&1 | grep fsck.reiser4 | awk \
+fsck.reiser4 -V 2>&1 | grep ^fsck.reiser4 | awk \
 'NR==1{print "reiser4progs          ", $2}'
 
 xfs_db -V 2>&1 | grep version | awk \
usr/Makefile +37 -54

102 lines not on this page · raw message