Skip to contentSkip to conversation

i2c-piix4: Document the IBM problem more

PATCH New Jean Delvare 1 participant 1 message Apr 25, 2006

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 4/10 i2c-piix4: Document the IBM problem more

Content-Disposition: inline; filename=i2c-piix4-improve-ibm-error-message.patch

Properly document on which systems the i2c-piix4 SMBus driver will refuse to load. Hopefully this will make it clearer for users, which were often wondering why their destop or server systems were detected as laptops.

Closes bug #6429.

Signed-off-by Jean Delvare <khali at linux-fr.org>
---
 Documentation/i2c/busses/i2c-piix4 |   14 ++++++++++++++
 drivers/i2c/busses/i2c-piix4.c     |    2 +-
 2 files changed, 15 insertions(+), 1 deletion(-)
Documentation/i2c/busses/i2c-piix4 +14 -0
@@ -82,3 +82,17 @@
 
 Please note that you don't need to do that in all cases, just when the SMBus is
 not working properly.
+
+
+Hardware-specific issues
+------------------------
+
+This driver will refuse to load on IBM systems with an Intel PIIX4 SMBus.
+Some of these machines have an RFID EEPROM (24RF08) connected to the SMBus,
+which can easily get corrupted due to a state machine bug. These are mostly
+Thinkpad laptops, but desktop systems may also be affected. We have no list
+of all affected systems, so the only safe solution was to prevent access to
+the SMBus on all IBM systems (detected using DMI data.)
+
+For additional information, read:
+http://www2.lm-sensors.nu/~lm78/cvs/lm_sensors2/README.thinkpad
drivers/i2c/busses/i2c-piix4.c +1 -1
@@ -130,7 +130,7 @@
 	/* Don't access SMBus on IBM systems which get corrupted eeproms */
 	if (dmi_check_system(piix4_dmi_table) &&
 			PIIX4_dev->vendor = PCI_VENDOR_ID_INTEL) {
-		dev_err(&PIIX4_dev->dev, "IBM Laptop detected; this module "
+		dev_err(&PIIX4_dev->dev, "IBM system detected; this module "
 			"may corrupt your serial eeprom! Refusing to load "
 			"module!\n");
 		return -EPERM;
Signature · 1 line
Jean Delvare