E1000 stopped transmitting in rc3.
Subsystems (2)
With 2.6.17-rc3, my E1000 won't get a dhcp lease. Looking at tcpdump and ifconfig output, it's easy to see why. It's recieving packets, but the packets transmitted field of ifconfig never increases.
The last version I have built that worked ok was 2.6.17rc2-git3
NIC is ..
03:0e.0 Ethernet controller: Intel Corporation 82545GM Gigabit Ethernet Controller (rev 04) (8086:1026)
Dave
Signature · 1 line
http://www.codemonkey.org.uk
Quoted 6 lines · Dave Jones
With 2.6.17-rc3, my E1000 won't get a dhcp lease. Looking at tcpdump and ifconfig output, it's easy to see why. It's recieving packets, but the packets transmitted field of ifconfig never increases.
The last version I have built that worked ok was 2.6.17rc2-git3
*puzzled*
the only patch between 2.6.17rc2 and 2.6.17rc3 contains an rx-path patch, but nothing that affects tx. All the other patches sent earlier are queued for 2.6.18 so they don't apply.
Auke
David S. Miller
maintainerFrom: Auke Kok <[email protected]>
Date: Thu, 27 Apr 2006 18:54:28 -0700
Quoted 6 lines
Quoted 5 lines · Dave Jones
With 2.6.17-rc3, my E1000 won't get a dhcp lease. Looking at tcpdump and ifconfig output, it's easy to see why. It's recieving packets, but the packets transmitted field of ifconfig never increases.
Quoted 7 lines
Quoted 1 line
The last version I have built that worked ok was 2.6.17rc2-git3
*puzzled*
the only patch between 2.6.17rc2 and 2.6.17rc3 contains an rx-path patch, but nothing that affects tx. All the other patches sent earlier are queued for 2.6.18 so they don't apply.
If the rx path is corrupting the packets or providing bad checksums, there will be nothing to transmit back.
So RX changes could explain the behavior.
Quoted 1 line
From what I have seen currently, the issue is resolved. Based on a
test across multiple systems on x86-64, i386, and ia64 builds.
Quoted 25 lines · Auke Kok
Quoted 22 lines · David S. Miller
From: Auke Kok <[email protected]>
Date: Thu, 27 Apr 2006 18:54:28 -0700Quoted 11 lines
Quoted 6 lines · Dave Jones
With 2.6.17-rc3, my E1000 won't get a dhcp lease. Looking at tcpdump and ifconfig output, it's easy to see why. It's recieving packets, but the packets transmitted field of ifconfig never increases.
The last version I have built that worked ok was 2.6.17rc2-git3
*puzzled*
the only patch between 2.6.17rc2 and 2.6.17rc3 contains an rx-path
patch, but
Quoted 1 line
nothing that affects tx. All the other patches sent earlier are queued
for
Quoted 1 line
2.6.18 so they don't apply.
If the rx path is corrupting the packets or providing bad checksums, there will be nothing to transmit back.
Quoted 10 lines
Quoted 1 line
So RX changes could explain the behavior.
Jim sent me a private message that his colleagues messed up the build, and that it is working correctly now, right Jim?
Cheers,
Auke
--
Jim McCullough