Skip to contentSkip to conversation

machine stops before reboot

BUG 2.6.16-rt18 Vernon Mauery 1 participant 2 messages Apr 28, 2006

lore
Share & tools
lore
#0 lore raw

Ingo,

On the Intellistation and LS-20 configuration I just reported the irqpoll bug about, if we don't use irqpoll to boot and it actually boots up and things seem to be working fine, when we go to reboot, it doesn't ever completely shut down:

The system is going down for reboot NOW!
INIT: Sending processes the TERM signal
Stopping cups-config-daemon: [ OK ]
Stopping HAL daemon: [FAILED]
Stopping system message bus: [ OK ]
Stopping atd: [ OK ]
Stopping cups: [ OK ]
Shutting down xfs: [ OK ]
Shutting down console mouse services: [ OK ]
Stopping sshd:[ OK ]

Shutting down sendmail: [  OK  ]
Shutting down sm-client: [  OK  ]
Shutting down smartd: [  OK  ]
Stopping xinetd: [  OK  ]
Stopping acpi daemon: [  OK  ]
Stopping crond: [  OK  ]
Stopping NFS statd: [  OK  ]
Stopping portmap: [  OK  ]
Shutting down kernel logger: [  OK  ]
Shutting down system logger: [  OK  ]
Shutting down interface eth0:  [  OK  ]
Shutting down loopback interface:  [  OK  ]
Starting killall:  [  OK  ]

Sending all processes the TERM signal...

And it gets stuck here. That machine is not dead or hung. I can type stuff and it shows up on the terminal, but it does not seem to be running anything. I can reboot it with the sysrq keys.

I tested this against 2.6.16-rt16 and I haven't seen this problem after about 6 reboots. So I think this is a regression.

--Vernon

#1 lore raw
Quoted 6 lines · Vernon Mauery

Ingo,

On the Intellistation and LS-20 configuration I just reported the irqpoll bug about, if we don't use irqpoll to boot and it actually boots up and things seem to be working fine, when we go to reboot, it doesn't ever completely shut down:

...

Quoted 10 lines
Shutting down loopback interface:  [  OK  ]
Starting killall:  [  OK  ]

Sending all processes the TERM signal...

And it gets stuck here. That machine is not dead or hung. I can type stuff and it shows up on the terminal, but it does not seem to be running anything. I can reboot it with the sysrq keys.

I tested this against 2.6.16-rt16 and I haven't seen this problem after about 6 reboots. So I think this is a regression.

Right after I sent this email, 2.6.16-rt16 got stuck at the next step:
Sending all processes the KILL signal...

So maybe this is a long standing problem?

--Vernon

Quoted 8 lines

--Vernon

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/